5.0 mm x 3.2 mm Package Pinout ............................................................................................................................................... 1
Ordering Information .................................................................................................................................................................... 2
Device Configurations and Pin-outs ............................................................................................................................................. 9
Pin-out Top Views................................................................................................................................................................. 9
Test Circuit Diagrams for LVCMOS and Clipped Sinewave Outputs ......................................................................................... 10
Frequency Stability ............................................................................................................................................................. 16
Output Frequency and Format............................................................................................................................................ 16
Output Frequency Tuning ................................................................................................................................................... 16
Pin 1 Configuration (OE, VC, or NC) .................................................................................................................................. 17
Control Voltage Bandwidth ................................................................................................................................................. 20
Pull Range and Average Pull Range .................................................................................................................................. 22
Output Frequency ............................................................................................................................................................... 23
2
I C Control Registers .......................................................................................................................................................... 25
Serial Interface Configuration Description .......................................................................................................................... 28
Serial Signal Format ........................................................................................................................................................... 28
Parallel Signal Format ........................................................................................................................................................ 29
Parallel Data Format ........................................................................................................................................................... 29
2
I C Timing Specification ...................................................................................................................................................... 31
2
I C Device Address Modes ................................................................................................................................................. 32
Schematic Example ............................................................................................................................................................ 33
Dimensions and Patterns ........................................................................................................................................................... 34
Additional Information ................................................................................................................................................................ 36
Revision History ......................................................................................................................................................................... 37
Rev 1.05
Page 3 of 38
www.sitime.com
SiT5156
1 MHz to 60 MHz, ±0.5 to ±2.5 ppm, Elite Platform™ Super-TCXO
Electrical Characteristics
All Min and Max limits are specified over temperature and rated operating voltage with 15 pF output load unless otherwise
stated. Typical values are at 25°C and 3.3V Vdd.
Table 1. Output Characteristics
Parameters
Nominal Output Frequency Range
Operating Temperature Range
Symbol
F_nom
T_use
Min.
1
-20
-40
-40
Frequency Stability over
Temperature
Initial Tolerance
Supply Voltage Sensitivity
F_stab
–
–
–
F_init
F_Vdd
–
–
–
–
Output Load Sensitivity
F_load
–
–
–
Frequency vs. Temperature Slope
ΔF/ΔT
–
–
–
Dynamic Frequency Change during
Temperature Ramp
One-Year Aging
20-Year Aging
F_dynamic
–
–
–
F_1y
F_20y
–
–
Typ.
–
–
–
–
–
–
–
–
±7.10
±11.83
±28.40
±0.81
±1.35
±3.24
±15
±25
±60
±0.13
±0.21
±0.50
±1
±2
Max.
60
+70
+85
+105
±0.5
±1.0
±2.5
±1
±16.25
±32.50
±65.0
±2.75
±5.50
±11.00
±25
±50
±100
±0.21
±0.42
±0.83
–
–
Unit
MHz
°C
°C
°C
ppm
ppm
ppm
ppm
ppb
ppb
ppb
ppb
ppb
ppb
ppb/°C
ppb/°C
ppb/°C
ppb/s
ppb/s
ppb/s
ppm
ppm
Initial frequency at 25°C at 48 hours after 2 reflows
[p=32, null, left][font=微软雅黑][size=3]The main purpose of participating in this event is to experience the use of touchgfx desinger software. [/size][/font][/p][p=32, null, left][font=微软雅黑][size=3]Thro...
10 rules for component layout: Follow the layout principle of "big first, small later, difficult first, easy later", that is, important unit circuits and core components should be laid out first. Refe...
[font=宋体][size=3]I am preparing to do a low-power project. The scope is the development board of the msp430 series. The final effect is to achieve the transmission of wireless signals from the transmi...
1. Structure and working principle of P0 port
The structure of one of the 8 bits of port P0 is shown in the figure below:
As can be seen from the figure above, the P0 port is composed ...[Details]
What is Cache? Memory has a pyramid-level architecture in terms of access (read and write) speed Cache is actually cache, high speed is just a characteristic of cache (high level memory relative to...[Details]
Preface
In the previous article 〈C language + Keil5 + Proteus simulation〉Matrix keyboard line-by-line scanning method-20210414, the line reversal method of the matrix keyboard was mentioned, b...[Details]
Improving the optocoupler circuit can improve the accuracy of zero voltage measurement.
It seems simple to use optocouplers to establish galvanic isolation in circuits with different potenti...[Details]
The company has a Fuxu AT91RM9200 board, which comes with u-boot-0.40 and 2.4.19 kernel. I decided to port u-boot-1.1.6 and 2.6 kernel to it, and thus began to enter the world of embedded Linux. My d...[Details]
Confucius said: "If you want to do your work well, you must first sharpen your tools." There are some differences in the tools, components and digital-analog circuits used to learn single-chip microco...[Details]
On May 15, the signing ceremony of the "Source-Grid-Load-Storage" integrated project between Xinwanda Integrated Energy Services Co., Ltd., a wholly-owned subsidiary of Xinwanda, and the Zaozhuang ...[Details]
OFweek Cup · OFweek 2023 China
Robot
Industry Annual Selection (abbreviated as OFweek Robot Awards 2023) is jointly organized by OFweek, China's high-tech industry portal, and its authorita...[Details]
Everyone knows that the 51 MCU has four groups of registers R0-R7. Many friends often have problems using the register group. Although this is not a difficult problem, if an error occurs, it wil...[Details]
High-mix small-batch production automation
Case background:
BS CNC is a small family business that produces unique small to medium series of metal precision parts. Now they had a...[Details]
Recently, the implementation of autonomous driving in various cities has caused a lot of discussion. In China, Baidu's Carousel platform was allowed to freely travel on most roads in the main urban...[Details]
On May 24, Saudi Telecom Company (STC), Alibaba Cloud and Yida Capital announced the establishment of a cloud computing joint venture in Saudi Arabia. The cloud computing joint venture was signed by...[Details]
According to the latest report from DigiTimes, Apple supplier TSMC is preparing to produce 3-nanometer chips in the second half of 2022, and in the coming months, the supplier will begin producing 4-...[Details]
The demand for oscilloscopes is growing rapidly, and new research and test applications require more, faster, and more complex signals. This will require more intelligent test equipment to accurately...[Details]
1 Overview
IC designers strive to put more high-speed transistors into smaller and smaller packages, but this will inevitably lead to heat generation. In order to put these high-power ICs into smal...[Details]