C0805T562J2RBCTU

I. Introduction MTU (Master Terminal Unit) and RTU radio telemetry systems based on AVR microcontrollers and dedicated MODEM chips. Remote RTUs (the system can carry 256 RTUs) distributed at pipeli...[Details]

0Introduction FPGA based on SRAM technology needs to be configured every time it is powered on. Usually, the configuration file of FPGA is loaded by a dedicated EPROM outside the chip. This tr...[Details]

Scientists at the Swiss Federal Institute of Technology in Lausanne (EPFL) have developed a new structure using sodium-doped graphene. They believe that this new structure of the anode may overcome s...[Details]

EB cadian Sync, which will be demonstrated in Hall N5, Stand 5702, provides a secure way to update over the air, offering significant advantages to automakers and consumers Erlangen, Germany, June...[Details]

Example void DS18B20_in() {     GPIO_InitTypeDef gpio =      {         GPIO_Pin_11,         GPIO_Speed_50MHz,         GPIO_Mode_IPD     };       GPIO_Init(GPIOG, &gpio); } void DS18B20_out(...[Details]

　　At present, due to the high price of spectrum analyzers, only a few laboratories in colleges and universities are equipped with spectrum analyzers. However, in electronic information teaching, witho...[Details]

Introduction: ARM Basics - Predefined macros in the ARM compiler The ARM compiler predefines some macros. These predefine macros correspond to certain values. Some predefine macros have no correspo...[Details]

A domestically produced large-scale high-subsonic UAV uses a remote control + autopilot system to control flight. This type of UAV currently does not have the ability to navigate autonomously and main...[Details]

Thermocouples are one of the most commonly used temperature detection elements in industry. Its advantages are: ① High measurement accuracy. Because the thermocouple is in direct contact with ...[Details]

Tips for using oscilloscope in Proteus The CH1 and CH2 buttons on the lower left corner can select DC or AC. The CH1 and CH2 buttons in the upper right corner are used to switch between the two cha...[Details]

1. When STM8 uses UART2_SendData8(uint8_t Data) function to send data, the data will be lost because the library function does not judge whether the sending is completed; 2. The registers are modif...[Details]

The latest proposed integration techniques are designed using a stacking approach. Image source: Tokyo Institute of Technology Japanese researchers report that they have designed a new three-di...[Details]

introduction The stepper motor is a digital motor with advantages such as no cumulative error and high cost performance. It is widely used in life and production. Unlike other motors, stepper motors...[Details]

      Unlike Xiaomi 11, the Xiaomi 12 series only has two models launched at the first launch. It seems that the product strategy of this generation of digital series has undergone relatively large c...[Details]

1. Basic Information of the Company Wuxi Riemann Robotics Technology Co., Ltd. is a robotics company incubated by the Wuxi Research Institute of Huazhong University of Science and Technolo...[Details]