The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
2.5mm Pitch Connector for Discrete Wire Connection
HNC Series
■Features
1. Full Lock Mechanism
The connector is equipped with the full lock mechanism so as not be removed, unless locks are reset on both sides. This mechanism is
activated effectively to prevent extraction by cable hooking or other causes.
2. Thin Type Connector
Mounting height when the connector is used at the right angle
:
4.8mm
3. Mechanism to Prevent Mis-insertion
This thin type connector is equipped with the mechanism to prevent mis-
insertion.
4. Tin Plating and Gold Plating Variation
Two kinds of tin plating and gold plating types are available, and can be
chosen according to application. The tin plating is also set to a light operating
touch.
Mechanism
to prevent
false-insertion
Full lock
mechanism
■Applications
Various business equipment, financial terminals
B169
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or
Connector for
soon. Please check the
Connection
on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
HNC Series●2.5mm Pitch
will be discontinued
Discrete Wire
products status
■Product
Specifications
AWG 22 : 3A
Current rating
Rating
(Note1)
AWG 24 : 3A
AWG 26 : 2A
AWG 28 : 1A
AWG 30 : 0.5A
Voltage rating
Item
1. Insulation Resistance
2. Withstanding voltage
3. Contact Resistance
5. Vibration
1000M
ohms
min.
No flashover or insulation breakdown.
10m
ohms
Max
No electrical discontinuity of 1μs or more
250V AC
Specification
500V DC
1000V AC/1 minute
1A
Measure at the square steel pin of 0.635±0.002mm
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
(-25ç: 30 minutes
➝
5
to
35ç: 10 minutes
(-85ç:
30 minutes
➝
5
to
35ç: 10 minutes) 5 cycles
Tin plating
: 30 cycles
Gold plating : 50 cycles
Flow: 250ç for 5 seconds
Manual soldering: 300ç for 2 seconds
Operating Temperature Range
Operating Moisture Range
Storage Temperature Range
Storage Moisture Range
-25 to +85ç
(Note2)
-40
to 80%
-10 to +60ç
(Note3)
-40
to 70%
(Note3)
Condition
4. Insertor/Extraction Force 0.4N (40gf) min.,4.4N (450gf) max.
6.
Humidity (Steady state)
Contact resistance: 10m
ohms
max.Insulation resistance: 1000M
ohms
min.
96 hours at temperature of 40±2ç and humidity of 90% to 95%
No deformation of components affecting performance.
Note 1:
The rated current will be changed according to cable sizes for use. The header rating only t is 3A.
Note 2: Includes temperature rise caused by current flow.
Note 3: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range
and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 4: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications
for a specific part number shown.
■Material
Product
Crimping Socket
Contact
Pin Header
Part
Insulator
Contact
Insulator
Contact
Material
Polyamide
Phosphor Bronze
Polyamide
Brass
Finish
Black
Tin plated or gold plated
Black
Tin plated or gold plated
Remarks
UL94V-2
–––––
UL94V-2
–––––
■Ordering
Information
●Crimping
Plug
HNC 2 - 2.5 P -
*
DSL
q
q
Series Name
w
Series No.
e
Contact Pitch
r
Connector Type
S : Socket
P : Pin Header
w
: HNC
: 2, 1
: 2.5mm
e
r
t
y
t
Number of Contacts : 2
to
8,10,12,15
y
Contact Type
None : Crimping socket
DS
: Straight
DSL : Right angle
●Contact
HNC - 2.5S - C - A
q
q
Type: 2.5mm pitch socket
w
Packaging Type
C : Reel
D : Bag
w
e
e
Applicable cable size
A
: AWG22 to 26
B
: AWG26 to 30
B170
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at
Pitch Connector for
or contact your Hirose sales representative.
HNC Series●2.5mm
www.hirose-connectors.com,
Discrete Wire Connection
■Crimping
Socket
[Figure 1]
[Figure 2]
Unit: mm
Part Number
HNC2-2.5S- 2
HNC2-2.5S- 3
HNC2-2.5S- 4
HNC2-2.5S- 5
HNC2-2.5S- 6
HNC2-2.5S- 7
HNC2-2.5S- 8
HNC2-2.5S-10
HNC1-2.5S-12
HNC2-2.5S-15
CL No.
218-0011-1
218-0022-8
218-0039-0
218-0027-1
218-0042-5
218-0030-6
218-0014-0
218-0017-8
218-0008-7
218-0045-3
Number of Contacts
2
3
4
5
6
7
8
10
12
15
A
12.4
14.9
17.4
19.9
22.4
24.9
27.4
32.4
37
44.9
B
6
8.5
11
13.5
16
18.5
21
26
31
38.5
C
2.5
5
7.5
10
12.5
15
17.5
22.5
27.5
35
Figure 2
Figure 1
Figure 1
Yes
Dimensions
RoHS
Note1: Please order a quantity multiplied by 100 pcs. (Not per bag, but per pcs.)
Note2: The series name of 12 contacts connector is HNC1, and partially will be changed in the
style.
B171
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or
Connector for
soon. Please check the
Connection
on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
HNC Series●2.5mm Pitch
will be discontinued
Discrete Wire
products status
■Straight
Pin Header
[Figure 3]
0.1
+
●Board
Through-hole Diameter: ø1.1
+0
[Figure 4]
Unit: mm
Part Number
HNC2-2.5P- 2DS(**)
HNC2-2.5P- 3DS(**)
HNC2-2.5P- 4DS(**)
HNC2-2.5P- 5DS(**)
HNC2-2.5P- 6DS(**)
HNC2-2.5P- 7DS(**)
HNC2-2.5P- 8DS(**)
HNC2-2.5P-10DS(**)
HNC1-2.5P-12DS(**)
CL No.
218-0012-4-**
218-0023-0-**
218-0040-0-**
218-0028-4-**
218-0043-8-**
218-0031-9-**
218-0015-2-**
218-0018-0-**
218-0009-0-**
Number of Contacts
2
3
4
5
6
7
8
10
12
A
12.5
15
17.5
20
22.5
25
27.5
32.5
35.5
B
7.8
10.4
12.9
15.4
17.9
20.4
22.8
27.8
32.8
C
2.5
5
7.5
10
12.5
15
17.5
22.5
27.5
Specific No.
Tin plating
55
55
55
55
55
55
55
55
55
Gold plating
02
02
01
02
01
02
02
02
02
Figure 4
Figure 3
Figure 3
Yes
Dimensions
RoHS
45
15
55
40.4 35
01
HNC2-2.5P-15DS(**) 218-0046-6-**
Note1: Please order a quantity multiplied by 100 pcs. (Not per bag, but per piece)
Note2: The series name of the 12 contacts connector is HNC1 and the style will be partially changed.
B172
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at
Pitch Connector for
or contact your Hirose sales representative.
HNC Series●2.5mm
www.hirose-connectors.com,
Discrete Wire Connection
■Right
Angle Pin Header
[Figure 5]
0.1
+
●Board
Through-hole Diameter: ø1.1
+0
[Figure 6]
Unit: mm
Part Number
HNC2-2.5P- 2DSL(**)
HNC2-2.5P- 3DSL(**)
HNC2-2.5P- 4DSL(**)
HNC2-2.5P- 5DSL(**)
HNC2-2.5P- 6DSL(**)
HNC2-2.5P- 7DSL(**)
HNC2-2.5P- 8DSL(**)
HNC2-2.5P-10DSL(**)
HNC1-2.5P-12DSL(**)
CL No.
218-0013-7-**
218-0024-3-**
218-0041-2-**
218-0029-7-**
218-0044-0-**
218-0032-1-**
218-0016-5-**
218-0019-3-**
218-0010-9-**
Number of Contacts
2
3
4
5
6
7
8
10
12
A
12.5
15
17.5
20
22.5
25
27.5
32.5
35.5
B
7.8
10.4
12.9
15.4
17.9
20.4
22.8
27.8
32.8
C
2.5
5
7.5
10
12.5
15
17.5
22.5
27.5
Specific No.
Tin plating
55
55
55
55
55
55
55
55
55
Gold plating
02
02
01
02
01
02
02
02
02
Figure 6
Figure 5
Figure 5
Yes
Dimensions
RoHS
45
15
55
40.4 35
01
HNC2-2.5P-15DSL(**) 218-0047-9-**
Note1: Please order a quantity multiplied by 100 pcs. (Not per bag, but per piece)
Note2: The series name of the 12 contacts connector is HNC1 and the style will be partially changed.
The following is a bidirectional clamping diode, which will clamp the output voltage of the PIN pin between VDD and GND (if the tube voltage drop is ignored)
But I don't understand, when we talk about...
Can you help me analyze this circuit diagram? My own drawing is a bit rough. What is the signal input terminal of ADVFC32?
The signal is first converted to voltage by advfc32 and then amplified by LM2...
The teacher's requirements are: operating frequency range: 2.2GHz-2.7GHz, VSWR less than 1.8, gain 20. Let's find a power amplifier chip to simulate with ADS, and finally make a physical product. I do...
As we all know, oscilloscopes are designed to display waveforms, so in this video series, let’s first discuss the control of waveform display. ZDS2022 Oscilloscope 100 Practical Specials 1: Infinit...[Details]
Strategic Acquisition Expands ON Semiconductor's Capabilities in Depth Sensing and 3D Imaging to Support Next-Generation Imaging Systems
July 4, 2024 – As part of its ongoing commi...[Details]
Ahead of the Windows Sun Valley conference on June 24, Microsoft is stepping up its efforts to finalize the official version of Windows Sun Valley, or the "next generation of Windows." As par...[Details]
1 Introduction In order to improve the controllability of on-site operations in high-risk workplaces, this paper adopts bionic principles and high-integration design to realize a 3G vid...[Details]
When choosing a system topology that can generate multiple outputs from a single supply, a flyback power supply is a wise choice. Since the voltage on each transformer winding is proportional to the ...[Details]
Logarithmic amplifier, what does logarithmic amplifier mean
To understand logarithmic amplifiers, we must first understand signal compression. In the real world, some signals often have a wide dyna...[Details]
1 Introduction The DMX512 protocol is a digital multiplexing protocol developed by the United-States Institute for Theater Technology (USITT). Its original intention was to make the numerous dimmers ...[Details]
MSM7512B is a low-cost, low-power, high-performance modulation and demodulation chip produced by OKI of Japan. It meets the ITU-TV.23 protocol standard, is powered by a single power supply (3~5V), use...[Details]
According to foreign media reports, several Chinese manufacturers including OPPO and vivo have received multiple samples of their 5G chipset solutions from Samsung. These OEMs are now intensively tes...[Details]
According to foreign media reports, researchers at the University of Adelaide in Australia have made progress in sulfur battery technology. In the near future, the number of times a battery can be ch...[Details]
On May 11, according to foreign media reports, Tesla Motors Australia Research Institute announced the scientific research results of relevant lithium-ion batteries/lithium metal hybrid batteries . S...[Details]
The "3rd China Integrated Circuit Design Innovation Conference and Wuxi IC Application Expo (ICDIA 2023)" will be held in Wuxi from July 13 to 14. This conference specially invites many important gue...[Details]
Shortcuts can be said to be one of Apple’s most powerful apps, and it can provide the fastest operation method for all operations. Various functions can also be achieved through some automated operat...[Details]
An oscilloscope is an indispensable instrument in modern home appliance maintenance. With it, technicians can quickly and accurately find the fault, so the correct and proficient use of an oscillosco...[Details]
Industrial control computers are computer systems designed specifically for the field of industrial automation control, with the characteristics of high performance, high reliability, real-time per...[Details]
_pdf/pg_0001.png)
Integrated technical exchanges
京公网安备 11010802033920号
EEWORLD_pdf/1.png)
_pdf/2.png)
_pdf/3.png)
_pdf/4.png)
_pdf/5.png)
_pdf/pg_0002.png)
_pdf/pg_0003.png)
_pdf/pg_0004.png)
_pdf/pg_0005.png)
