5.0 mm x 3.2 mm Package Pinout ............................................................................................................................................... 1
Ordering Information .................................................................................................................................................................... 2
Device Configurations and Pin-outs ............................................................................................................................................. 9
Pin-out Top Views................................................................................................................................................................. 9
Test Circuit Diagrams for LVCMOS and Clipped Sinewave Outputs ......................................................................................... 10
Frequency Stability ............................................................................................................................................................. 16
Output Frequency and Format ............................................................................................................................................ 16
Output Frequency Tuning ................................................................................................................................................... 16
Pin 1 Configuration (OE, VC, or NC) .................................................................................................................................. 17
Control Voltage Bandwidth ................................................................................................................................................. 20
Pull Range and Absolute Pull Range .................................................................................................................................. 22
Output Frequency ............................................................................................................................................................... 23
I
2
C Control Registers .......................................................................................................................................................... 25
Serial Interface Configuration Description .......................................................................................................................... 28
Serial Signal Format ........................................................................................................................................................... 28
Parallel Signal Format ........................................................................................................................................................ 29
Parallel Data Format ........................................................................................................................................................... 29
I
2
C Timing Specification ...................................................................................................................................................... 31
I
2
C Device Address Modes ................................................................................................................................................. 32
Schematic Example ............................................................................................................................................................ 33
Dimensions and Patterns ........................................................................................................................................................... 34
Additional Information ................................................................................................................................................................ 36
Revision History ......................................................................................................................................................................... 37
Rev 1.04
Page 3 of 38
www.sitime.com
SiT5155
±0.5 ppm, Elite Platform™ Super-TCXO for GNSS/GPS
Electrical Characteristics
All Min and Max limits are specified over temperature and rated operating voltage with 15 pF output load unless otherwise
stated. Typical values are at 25°C and 3.3 V Vdd.
Table 1. Output Characteristics
Parameters
Nominal Output Frequency Range
Symbol
F_nom
Min.
Typ.
Max.
Unit
MHz
Condition
Frequency Coverage
10.000000, 10.949297
16.367600, 16.367667
16.368000, 16.369000
16.384000, 20.000000
24.553500, 25.000000
26.000000, 40.000000
Temperature Range
Operating Temperature Range
T_use
-20
-40
-40
Frequency Stability over
Temperature
Initial Tolerance
Supply Voltage Sensitivity
Output Load Sensitivity
Frequency vs. Temperature Slope
Dynamic Frequency Change during
Temperature Ramp
One-Year Aging
20-Year Aging
F_stab
F_init
F_Vdd
F_load
ΔF/ΔT
F_dynamic
F_1y
F_20y
–
–
–
–
–
–
–
–
–
–
–
–
–
±7.10
±0.81
±15
±0.13
±1
±2
+70
+85
+105
±0.5
±1
±16.25
±2.75
±25
±0.21
–
–
°C
°C
°C
ppm
ppm
ppb
ppb
ppb/°C
ppb/s
ppm
ppm
Extended Commercial, ambient temperature
Industrial, ambient temperature
Extended Industrial, ambient temperature
Referenced to (max frequency + min frequency)/2 over the
rated temperature range. Vc=Vdd/2 for VCTCXO
Initial frequency at 25°C at 48 hours after 2 reflows
China's chips face embarrassment, looking forward to new breakthroughs 2006-6-22 Once upon a time, Chinese IC design companies seemed to have achieved a "clustered breakthrough in 'Chinese chips'". H...
[size=4]Three modes are configured: single mode, continuous mode and DMA transfer[/size] [size=4]The single mode is to call the acquisition function once, collect at a specified AD port, and sample wh...
[i=s]This post was last edited by tonywang822 on 2021-12-3 13:07[/i]This is my first time to use a PIC microcontroller. I downloaded a source program and the hex file can be used normally. I want to m...
Webinar - How to quickly design power rails for Xilinx FPGAs and SoCs : https://training.eeworld.com.cn/course/5283In this webinar in cooperation with farnell it will be discussed how to use the Texas...
This design illustrates how to control this power stage using a C2000 MCU and LMG3410 GaN FET modules.To improve efficiency, this design uses adaptive dead time and phase shedding methods. Nonlinear v...
The main function of a single-chip microcomputer is to control peripheral devices and realize certain communications and data processing. However, in certain specific occasions, mathematical operati...[Details]
1 Overview
With the continuous development and increasing maturity of computer and network technology, computer monitoring has been widely used in power plants and substations, which has brough...[Details]
OFweek Cup 2022 China
Robot
Industry Annual Awards (abbreviated as OFweek Robot Awards 2022) is jointly organized by OFweek, China's high-tech industry portal, and its authoritative robo...[Details]
On April 23, Zhongying Electronics released its first quarter report for 2020, stating that during the reporting period, the company achieved sales revenue of 201.66 million yuan, a year-on-year incr...[Details]
Waveform Measurement
Many terms are used to describe the types of measurements you can make with an oscilloscope . This section will introduce some of the most commonly used measurements and ...[Details]
On April 11, 2019, NIO officially released the 70kWh to 84kWh range upgrade plan. In other words, depending on different scenarios and needs, users can improve the endurance of their cars through f...[Details]
Artificial intelligence (AI) is driving the exponential growth of global data generation, prompting an increasing demand for energy from the chips that support this data growth. Infineon Technologie...[Details]
Huawei applied for a technical patent for "a folding display screen, a method for manufacturing a folding display screen and a terminal device" in 2019, which has now been made public. This ...[Details]
Xining, December 18 (China News Service) (Luo Yunpeng, Jing Mingfa, Zhu Yiran) China State Grid Qinghai Electric Power Company announced on the 18th that the first transformer of China's first clea...[Details]
Monitoring important equipment installed in remote areas is an effective means to protect the equipment and monitor its normal operation. Currently, the more popular remote equipment monitoring sys...[Details]
On May 16, the source @InstLatX64 recently tweeted that Intel is preparing to launch a new N250 "Twin Lake" series of low-power processors to replace the N200 series "Alder Lake-N" series.
The...[Details]
Pressure transmitters are important components used in many industrial equipment to control industrial processes and pressure changes. They can be used to measure pressure, liquid level, flow rate, d...[Details]
In 2019, Arm launched the Total Compute strategy, which adopts a holistic, solution-centric SoC design approach. By going beyond individual IP elements to design and optimize systems to create use ca...[Details]
In the early hours of the day before yesterday, Apple brought the most disappointing system update in recent years. There is no screen-off display, no new UI design, no amazing black technology, only...[Details]
The sound produced by the electron tube has a mellow tone, sweet voice and strong musical flavor. I believe that most music enthusiasts know it! The low-end and medium-end sound used by most families ...[Details]
PCB Design
京公网安备 11010802033920号
EEWORLD
