provides tough, semirigid, very-thin-wall insulation and strain relief of multipin
connectors, solder joints and other delicate electrical connections and
terminations. It is well-suited for applications that require dense packing
of components or visual inspection of covered components. It is especially
suitable for applications requiring outstanding abrasion and cut-through
resistance and superior chemical and solvent resistance. Its high temperature
performance meets or exceeds military and industrial standards. RW-175 meets
NASA outgassing requirements making it suitable for use in space applications
such as satellites.
KEY FEATURES
•
2:1 shrink ratio for all standard sizes
•
Tough, semirigid, very-thin-wall insulation
•
High flame-resistance, meeting the require-
ELECTRICAL
•
Provides excellent electrical insulation
•
Not recommended for use as a primary insulator at temperatures exceeding 135°C
[275°F]
ments of AMS-DTL-23053, Test C, with UL
and CSA VW-1 flammability rating
•
High temperature performance that meets
MECHANICAL
•
Tough modified polyvinylidene fluoride material provides outstanding abrasion and
or exceeds military and industrial standards
•
Protection from most industrial solvents,
cut-through resistance
•
Excellent for strain relief when installed on delicate electrical connections and termi-
fuels, and chemicals
•
Available in several “microtubing” sizes for
nations
applications requiring recovered I.D.’s as
small as .007” (0.178mm)
•
Meets NASA outgassing requirements
•
Offers improved clarity (clear version) and
TEMPERATURE RATING
•
Full recovery temperature: 175°C [347°F]
•
Operating Temperature range: -55°C to 175°C [-67°F to 347°F]
increased resistance to crazing when com-
pared to previously offered solutions
STANDARDS AND SPECIFICATIONS
•
RW-3029/2
•
RW-175 Microtubing SCD
APPLICATIONS
•
Appliances
•
Military and commercial aircraft
•
Satellites
•
Commercial electronics and communication
•
Industrial equipment
•
SAE-AMS-DTL-23053/8
•
UL 224 VW-1
•
CSA C22.2 No. 198.1-98 VW-1
ORDERING INFORMATION
•
Color: Clear (-X) (standard); Black (-0) (nonstandard)
•
Standard packaging (-STK): 1.2m [4 ft.] lengths
Optional packaging (-SP): Spool, varying lengths (consult TE for details)
•
Ordering description: Specify product name, size, and color; for example, RW-
175-3/16-X.
te.com/products/RW-175
1-1773729-9 APP 2/2014
USA: 1-800-522-6752
Canada: +1-905-475-6222
Mexico: +52 (0) 55-1106-0800
Latin/S. America: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
TE Connectivity
RW-175 DIMENSIONS
RW-175
Expanded as supplied
W
Fully recovered after heating
D
d
Size
3/64
1/16
3/32
1/8
3/16
1/4
3/8
1/2
3/4
1
1-1/2
2
Minimum
Expanded I.D. (D)
in.
.046
.063
.093
.125
.187
.250
.375
.500
.750
1.000
1.500
2.000
mm.
1.17
1.60
2.36
3.18
4.75
6.35
9.53
12.70
19.05
25.40
38.10
50.80
Maximum
Recovered I.D. (d)
in.
.023
.031
.046
.062
.093
.125
.187
.250
.375
.500
.750
1.000
mm.
.58
.79
1.17
1.58
2.36
3.18
4.75
6.35
9.53
12.70
19.05
25.40
Nominal Recovered
Jacket Wall (W)
in.
.010 ± .002
.010 ± .002
.010 ± .002
.010 ± .002
.010 ± .002
.013 ± .002
.013 ± .002
.013 ± .002
.017 ± .003
.019 ± .003
.020 ± .003
.020 ± .003
mm.
.25 ± .051
.25 ± .051
.25 ± .051
.25 ± .051
.25 ± .051
.33 ± .051
.33 ± .051
.33 ± .051
.43 ± .076
.48 ± .076
.51 ± .076
.51 ± .076
RW-175 ORDERING DESCRIPTION
Example 1:
RW-175-3/8-X-STK
1.2m [4 ft.] Length
Color is Clear
Size
Semirigid, Very Thin Wall Product
Example 2:
RW-175-3/4-0-SP
Spool Packaging
Color is Black
Size
Semirigid, Very Thin Wall Product
te.com/products/RW-175
1-1773729-9 APP 2/2014
USA: 1-800-522-6752
Canada: +1-905-475-6222
Mexico: +52 (0) 55-1106-0800
Latin/S. America: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
TE Connectivity
PRODUCT OFFERING
RW-175
Material Description
RW-175-3/64-X-STK
RW-175-3/64-X-SP
RW-175-3/64-0-STK
RW-175-3/64-0-SP
RW-175-1/16-X-STK
RW-175-1/16-X-SP
RW-175-1/16-0-STK
RW-175-1/16-0-SP
RW-175-3/32-X-STK
RW-175-3/32-X-SP
RW-175-3/32-0-STK
RW-175-3/32-0-SP
RW-175-1/8-X-STK
RW-175-1/8-X-SP
RW-175-1/8-0-STK
RW-175-1/8-0-SP
RW-175-3/16-X-STK
RW-175-3/16-X-SP
RW-175-3/16-0-STK
RW-175-3/16-0-SP
RW-175-1/4-X-STK
RW-175-1/4-X-SP
RW-175-1/4-0-STK
RW-175-1/4-0-SP
RW-175-3/8-X-STK
Material Number
CV3299-000
CV3270-000
CV3331-000
CV3269-000
CV3300-000
CV3257-000
CV3322-000
CV3256-000
CV3301-000
CV3267-000
CV3329-000
CV3266-000
CV3302-000
CV3262-000
CV3325-000
CV3261-000
CV3303-000
CV3265-000
CV3328-000
CV3264-000
CV3304-000
CV3260-000
CV3324-000
CV3259-000
CV3305-000
Material Description
RW-175-3/8-X-SP
RW-175-3/8-0-STK
RW-175-3/8-0-SP
RW-175-1/2-X-STK
RW-175-1/2-X-SP
RW-175-1/2-0-STK
RW-175-3/4-X-STK
RW-175-3/4-X-SP
RW-175-3/4-0-STK
RW-175-1-X-STK
RW-175-1-X-SP
RW-175-1-0-STK
RW-175-1-1/2-X-STK
RW-175-1-1/2-0-STK
RW-175-2-X-STK
RW-175-030-X-SP†
RW-175-NO.1-X-SP†
RW-175-NO.2-X-SP†
RW-175-NO.13-X-SP†
RW-175-NO.14-X-SP†
RW-175-NO.33-X-SP†
RW-175-NO.33-0-SP†
RW-175-NO.65-X-SP†
RW-175-NO.65-0-SP†
Material Number
CV3272-000
CV3332-000
CV3271-000
CV3306-000
CV3258-000
CV3323-000
CV3307-000
CV3268-000
CV3330-000
CV3308-000
CV3263-000
CV3326-000
CV3309-000
CV3327-000
CV3310-000
CV3281-000
CV3293-000
CV3294-000
CV3291-000
CV3292-000
CV3296-000
CV3295-000
CV3298-000
CV3297-000
† RW-175 microtubing is available in 0.014-0.045 in. (.356-1.143 mm) dia.
Consult TE for complete details.
SAMPLE INVENTORY
RW-175-3/64-X-STK
RW-175-1/16-X-STK
RW-175-3/32-X-STK
RW-175-1/8-X-STK
RW-175-3/16-X-STK
RW-175-1/4-X-STK
RW-175-3/8-X-STK
RW-175-1/2-X-STK
RW-175-3/4-X-STK
RW-175-1-X-STK
RW-175-1-1/2-X-STK
RW-175-NO.1-X-SP
RW-175-NO.33-X-SP
te.com/products/RW-175
1-1773729-9 APP 2/2014
USA: 1-800-522-6752
Canada: +1-905-475-6222
Mexico: +52 (0) 55-1106-0800
Latin/S. America: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
TE Connectivity
PROPERTY REQUIREMENTS
RW-175
Property
PHYSICAL
Dimensions
Longitudinal Change
Tensile Strength
Ultimate Elongation
Secant Modulus (expanded)
Specific Gravity
Low Temperature Flexibility
4 hours at -55°C ± 2°C (-67 ±4°F)
Heat Shock
4 hours at 300 ± 5°C (572 ± 9°F)
Heat Resistance
168 hours at 250 ± 5°C (482 ± 9°F)
Followed by test for:
Ultimate elongation
Vacuum Outgasing
TML (Total Mass Loss)
VCM (Volatile Condensible Material)
ELECTRICAL
Dielectric Strength
Sizes 3/64 through 12
Sizes 3/4 through 2
Volume Resistivity
CHEMICAL
Corrosive Effect Copper Mirror
16 hours at 150°C
Copper Contact
168 hours at 175 ± 3°C (347 ± 5°F)
Followed by test for:
Ultimate Elongation
Flammability
Average Time of Burning
Fungus Resistance
Followed by tests for:
Tensile Strength
Ultimate Elongation
Dielectric Strength
Sizes 3/64 through 1/2
Sizes 3/4 through 2
Water Absorption
24 hours at 23 ± 3°C (73 ± 5°F)
Fluid Resistance
24 hours at 23 ± 3°C (73 ± 5°F)
JP-4 Fuel (MIL-T-5624)
SKYDROL 500 Hydraulic Fluid (MIL-H-5606)
Aviation Gasoline 100/130 (MIL-G-5572)
Salt Water (5% salt)
Anti-icing Fluid (MIL-A-8243)
Lubricating Oil (MIL-L-7808)
Followed by tests for:
Dielectric Strength
Sizes 3/64 through 1/2
Sizes 3/4 through 2
Tensile Strength
Unit
Inch (mm)
Percent
psi (MPa)
Percent
psi (MPa)
Requirement
Table 1
+0, -10 maximum
5000 minimum (34.5)
150 minimum
1 x 10
5
minimum (690)
1.8 maximum
No cracking
No dripping, flowing or
cracking
Test Method
RW-3029/2, Section 4.3.1
ASTM D 2671
RW-3029/2, Section 4.3.2
ASTM D 2671
ASTM D 2671
ASTM D 2671
RW-3029/2, Section 4.3.3
RW-3029/2, Section 4.3.4
RW-3029/2, Section 4.3.5
Percent
Percent
Percent
V/mil (kV/mm)
Ohm-cm
50 minimum
1.0 maximum
0.1 maximum
ASTM D 2671
ASTM E 595
800 minimum (31,500)
600 minimum (2,600)
1 X 10
13
minimum
Noncorrosive
No pitting or blackening of
copper
ASTM D 2671
ASTM D 2671
RW-3029/2, Section 4.3.6.1
ASTM D 2671, Proc. A
RW-3029/2, Section 4.3.6.2
ASTM D 2671, Proc. B
RW-3029/2, Section 4.3.2
ASTM D 2671, Proc. A
ISO 846, Method B
Percent
Seconds
psi (Mpa)
Percent
Volts/mil (volts/mm)
Percent
100 minimum
15 maximum
5000 minimum (34.5)
150 minimum
800 minimum (31,500)
600 minimum (23,600)
0.5 maximum
RW-3029/2, Section 4.3.2
ASTM D 2671
ASTM D 2671
ASTM D 2671
RW-3029/2, Section 4.3.7
Volts/mil (Volts/mm)
psi (MPa)
700 minimum (27,600)
500 minimum (19,700)
5000 minimum (34.5)
ASTM D 2671
RW-3029/2, Section 4.3.2
ASTM D 2671
While TE has made every reasonable effort to ensure the accuracy of the information in this flyer, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty
or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly
disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions
in this flyer are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.
Set F553 key pulsePress P1.1, P1.4 generates a pulse, the time is 5s.Press P2.1, P1.4 generates a pulse, the time is 1.2s.#include msp430.h#include msp430f5529.h
/*** main.c* Set F553 key pulse* Press...
Qorvo, Inc. (Nasdaq: QRVO), a leading provider of innovative RF solutions that connect the world, today announced a key milestone in the development of a veterinary point-of-care (POC) diagnostic plat...
Sign up for live broadcast
Live broadcast time: November 19, 2020 (Thursday) 10:00-11:00 am
Live Topic: New requirements for connectors in 5G multi-scenario terminal applications and Molex's 5G connec...
According to the United Nations Department of Economic and Social Affairs, by 2050, two-thirds of the world's population will live in cities. With the rapid advancement of urbanization, people can use...
Award-winning live broadcast: Internet of Everything - Shijian Company joins hands with Microchip experts to discuss IoT solutionsClick here to registerLive broadcast time: 10:00-11:30 am, April 15, 2...
[i=s]This post was last edited by dcexpert on 2022-2-5 11:26[/i]MS8211 is powered by 2 AAA batteries, which is more convenient than 9V batteries. However, there is a problem with using AAA batteries, ...
On the evening of November 28, Jinguan Co., Ltd. issued an announcement stating that on November 26, 2021, the company and China Overseas Narentai Energy Development (Beijing) Co., Ltd. (hereinafter ...[Details]
Since the second half of last year, the global semiconductor industry has encountered a capacity crisis. All industries have been affected by chip shortages and price increases. The automotive chip m...[Details]
1) What is the essence of literal pool in ARM assembly?
Chinese description:
The essence of the literal pool is a memory block in the ARM assembly language code section t...[Details]
This paper uses supercapacitors for rectification and filtering, and designs and implements them. Tests show that supercapacitors can be used for rectification and filtering at the output end of a ...[Details]
The island phenomenon refers to the situation where when the power supply of the power grid is disconnected due to a fault accident or power outage for maintenance, the distributed grid-connected pow...[Details]
Working principle of programmable controller and processing principle of input and output
Any relay control system is composed of three parts, namely, input part, logic part, and output ...[Details]
I got a stm8 board from someone today, and the following error occurred when downloading the program: Thu Jan 29, 2015 10:04:06: C-SPY Processor Descriptor V1.40.1.50106 for STM8 Thu Jan 29, 2015 ...[Details]
1 Introduction Power adapters are power supply conversion devices for small portable electronic devices and electronic appliances. They can be divided into AC output type and DC output t...[Details]
According to Taiwan media Central News Agency, TSMC Chairman Liu Deyin gave an explanation on overseas layout. He said that TSMC continues to evaluate possible factory construction plans in various l...[Details]
After the switch SA1 is switched, the device can automatically control the lighting in corridors and public toilets in public places, so that the lighting is turned off during the day, and the ligh...[Details]
The final list of the 2019 "China Good Brand" selection initiated by Shanghai Media Group | Interface News was announced. Saudi Basic Industries Corporation (SABIC), a world-renowned diversified chem...[Details]
In the mass production manufacturing industry represented by the automobile industry, the two-dimensional measurement of the surface microstructure of the workpiece is still in the mainstream position...[Details]
The United States has long warned its allies not to use Huawei's equipment, highlighting the company as a security risk. After failing to persuade its European allies, U.S. government officials said ...[Details]
Abstract: TMS320F206 is a representative one of TI's TMS320C2XX series chips. On the basis of introducing its characteristics, structure and performance, it focuses on several issues that should...[Details]
With the continuous advancement of science and technology and the transformation of the global energy structure, the automotive power system is undergoing unprecedented changes. From traditional fu...[Details]
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
