PRA073, PRA074, PRA100, PRA135, PRA182 (CNW)
www.vishay.com
Vishay Sfernice
High-Precision Thin Film Chip Resistor Arrays, Sulfur Resistant
FEATURES
• High-stability passivated nichrome resistive
layer 0.02 % on ratio, 1000 h at Pn at +70 °C
• Tight TCR (10 ppm/°C) and TCR tracking
(to 1 ppm/°C)
• Very low noise < -35 dB and voltage coefficient
< 0.01 ppm/V
Available
• Ratio tolerance to 0.01 % (R
≥
200R)
• High-temperature (230 °C) version, see PRA HT
Available
• ESA-qualified version, see PRA HR
• SMD wraparound chip resistor array
• Thin film technology
• Option to withstand humidity test of AEC-Q200
• Sulfur resistant (per ASTM B809-95 humid vapor test)
• Material categorization: for definitions of compliance
please see
www.vishay.com/doc?99912
LINKS TO ADDITIONAL RESOURCES
D
D
3
3
3D Models
PRA arrays can be used in most applications requiring a
matched pair (or set) of resistor elements. The networks
provide 1 ppm/°C TCR tracking, a ratio tolerance as tight as
0.01 %, and outstanding stability.
They are available in pitch:
• 0.70 mm for PRA073 (based on case 0302)
• 0.70 mm for PRA074 (based on case 0402)
• 1.00 mm for PRA100 (based on case 0603)
• 1.35 mm for PRA135 (based on case 0805)
• 1.82 mm for PRA182 (based on case 1206)
TYPICAL PERFORMANCE
ABSOLUTE
TCR
TOL.
10 ppm/°C
ABSOLUTE
0.1 %
TRACKING
2 ppm/°C
RATIO
0.01 %
DIMENSIONS
Independent resistors
B
One common point
B
A
D
E
F
C
A
D
E
Suggested land pattern
(according to IPC-7351A)
F
C
Z
max.
G
min.
X
max.
E
DIM.
A
B
C
D
E
F
G
min.
X
max.
Z
max.
PRA073
(0302 base)
mm
0.75 ± 0152
mil
29.5 ± 6
PRA074
(0402 base)
mm
1.00 ± 0.152
mil
40 ± 6
PRA100
(0603 base)
mm
1.52 ± 0.152
mil
60 ± 6
PRA135
(0805 base)
mm
1.91 ± 0.152
mil
75 ± 6
PRA182
(1206 base)
mm
3.06 ± 0.152
mil
120 ± 6
B = N x E (± 0.2 mm)
B = N x E (± 8 mil)
0.5 ± 0.127
0.15 ± 0.08
0.7
0.55 ± 0.1
0.28
0.51
1.8
20 ± 5
5.9 ± 3
27.5
21.5 ± 4
11
20
70.9
0.5 ± 0.127
0.25 ± 0.1
0.7
0.55 ± 0.1
0.29
0.51
2.05
20 ± 5
10 ± 4
27.5
21.5 ± 4
11.4
20
80.7
0.5 ± 0.127
0.38 ± 0.13
1
0.7 ± 0.1
0.49
0.66
2.57
20 ± 5
15 ± 5
40
27.6 ± 4
19.3
26
101.2
0.5 ± 0.127
0.38 ± 0.13
1.35
1.05 ± 0.1
0.88
1.01
2.96
20 ± 5
15 ± 5
53
41.4 ± 4
34.5
39.8
116.5
0.5 ± 0.127
0.4 ± 0.13
1.825
1.525 ± 0.1
1.99
1.49
4.11
20 ± 5
16 ± 5
72
6±4
78.3
58.7
161.8
Note
• N represents number of resistors
Revision: 04-Mar-2021
Document Number: 53033
1
For technical questions, contact:
sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
PRA073, PRA074, PRA100, PRA135, PRA182 (CNW)
www.vishay.com
(1)
Vishay Sfernice
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: PRA100I4-5K62BWBT51
P
R
A
1
0
0
I
4
-
5
K
6
2
B
W
B
T
9
9
GLOBAL
MODEL
PRA073
PRA074
PRA100
PRA135
PRA182
CONFIG.
I:
independent
C:
common
NUMBERS OF
RESISTORS
2 to 8
VALUE
(2)
Decimal
R or K
ABS. TOL.
B
= 0.1 %
D
= 0.5 %
RATIO TOL.
B
= 0.1 %
W
= 0.05 %
P
= 0.02 %
L
= 0.01 %
TERMINATION
B:
SnPb over
nickel barrier
N:
SnAg over
nickel barrier
G:
gold over
nickel barrier
PACKAGING
For more
information see
“Codification
of Packaging”
table
OPTION
Leave
blank
if no
option
B:
lead bearing version
N
and
G:
lead (Pb)-free /
RoHS version
For different ohmic values on a given network a specific part number is used
CNW
GLOBAL
MODEL
1368
T
For more information see
“Codification of Packaging” table
REFERENCE
Historical Part Number Example: PRA100 I 4 5K62 0.1 % 0.05 % TR R0051
PRA100
HISTORICAL
MODEL
I
CONFIG.
4
NUMBERS OF
RESISTORS
5K62
OHMIC VALUE
0.1 %
ABS. TOL.
0.05 %
RATIO TOL.
TR
PACKAGING
R0099
OPTION
Notes
(1)
Part number can only have 18 digits. Depending on information needed a compromise has to be found. Consult Vishay
(2)
When the last digit(s) of the ohmic value is (are) 0, it (they) must be omitted
E.g.:PRA100I4-2K20BWN
→
must be ordered under PRA100I4-2K2BWN
PRA100I4-2K00BWN
→
must be ordered under PRA100I4-2KBWN
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
SIZE
RESISTANCE
RANGE
Ω
POWER
RATING PER
RESISTOR
(1)
W
0.030
0.040
0.100
0.125
0.200
ABSOLUTE
TOLERANCE
±%
0.1, 0.5
0.1, 0.5
0.1, 0.5
0.1, 0.5
0.1, 0.5
RATIO
TOLERANCE
(2)
%
0.01, 0.02, 0.05, 0.1
0.01, 0.02, 0.05, 0.1
0.01, 0.02, 0.05, 0.1
0.01, 0.02, 0.05, 0.1
0.01, 0.02, 0.05, 0.1
ABSOLUTE
TCR
(3)
± ppm/°C
10
10
10
10
10
RATIO
TCR
(4)
± ppm/°C
1, 2
1, 2
1, 2
1, 2
1, 2
PRA073
073
10 to 50K
PRA074
074
10 to 100K
PRA100
100
10 to 250K
PRA135
135
10 to 500K
PRA182
182
10 to 2M
Notes
(1)
At +70 °C
(2)
0.02 % (R
≥
50
Ω),
0.01 % (R
≥
200
Ω)
(3)
At -40 °C to +125 °C
(4)
At -40 °C to +125 °C, 1 ppm/°C on request
CLIMATIC SPECIFICATIONS
Operating temperature range
-55 °C to +155 °C
Note
(1)
For
temperature up to 230 °C, see PRA
(www.vishay.com/doc?53057) or consult factory
(1)
PERFORMANCES
HT
TEST
Noise
Voltage coefficient
PRA073
PRA074
PRA100
PRA135
PRA182
SPECIFICATIONS
≤
-35 dB
≤
0.01 ppm/V
20 V
40 V
50 V
100 V
150 V
PERFORMANCE VS. HUMID SULFUR VAPOR
Test conditions
Test results
50 °C ± 2 °C, 85 % ± 4 % RH,
exposure time 500 h
Resistance drift < (0.05 %
R
+ 0.05
Ω),
no corrosion products observed
Limiting voltage
Revision: 04-Mar-2021
Document Number: 53033
2
For technical questions, contact:
sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
PRA073, PRA074, PRA100, PRA135, PRA182 (CNW)
www.vishay.com
SPECIAL FEATURES
Resistance values can be different on a given network
(R max./R min. as high as 300). Tooling charges might
be required depending on the ohmic values in the
same network. Please, consult Vishay Sfernice for ohmic
values, tolerances and also temperature coefficient (e.g.
± 1 ppm/°C) outside the standard range.
Vishay Sfernice
MECHANICAL SPECIFICATIONS
Substrate
Technology
Film
Terminations
Alumina
Thin film
Nickel chromium with mineral passivation
B type:
SnPb over nickel barrier
N type:
SnAg over nickel barrier
G type:
Gold over nickel barrier
AEC-Q200 OPTION: 0058
Vishay Sfernice offers a part compliant to AEC-Q200
specification.
PACKAGING
Several types of packaging are available: Waffle-pack and tape and reel.
SIZE
PRA073 x 2
PRA073 x 3
PRA073 x 4
PRA073 x 5
PRA073 x 6
PRA073 x 7
PRA073 x 8
PRA074 x 2
PRA074 x 3
PRA074 x 4
PRA074 x 5
PRA074 x 6
PRA074 x 7
PRA074 x 8
PRA100 x 2
PRA100 x 3
PRA100 x 4
PRA100 x 5
PRA100 x 6
PRA100 x 7
PRA100 x 8
PRA135 x 2
PRA135 x 3
PRA135 x 4
PRA135 x 5
PRA135 x 6
PRA135 x 7
PRA135 x 8
PRA182 x 2
PRA182 x 3
PRA182 x 4
PRA182 x 5
PRA182 x 6
PRA182 x 7
PRA182 x 8
Note
(1)
Other sizes upon request
MOQ
NUMBER OF PIECES PER PACKAGE
TAPE AND REEL
(1)
WAFFLE PACK MAX. QUANTITY PER BOX
MIN.
MAX.
400
100
140
140
60
60
60
400
100
140
100
4000
140
60
60
60
100
100
4000
140
100
4000
60
100
4000
50
50
100
3000
50
28
100
4000
140
100
4000
60
60
100
4000
50
28
100
4000
24
24
60
100
2000
60
100
4000
50
100
2000
21
100
1500
24
24
20
100
100
100
100
100
CODIFICATION OF PACKAGING
CODE 18
WAFFLE PACK
W
PLASTIC TAPE (Standard for all sizes.)
T
TA
TB
TC
TD
TE
TF
Revision: 04-Mar-2021
PACKAGING
100 min., 1 mult.
100 min., 1 mult.
100 min., 100 mult.
250 min., 250 mult.
500 min., 500 mult.
1000 min., 1000 mult.
2500min., 2500 mult.
Full tape (quantity depending on size of chips)
Document Number: 53033
3
For technical questions, contact:
sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
PRA073, PRA074, PRA100, PRA135, PRA182 (CNW)
www.vishay.com
PACKAGING RULES
Waffle Pack
Can be filled up to maximum quantity indicated in the table
here above, taking into account the minimum order quantity.
When quantity ordered exceeds maximum quantity of a
single waffle pack, the waffle packs are stacked up on the
top of each other and closed by one single cover.
To get “not stacked up” waffle pack in case of ordered
quantity > maximum number of pieces per package:
Please consult Vishay Sfernice for specific ordering
code.
Tape and Reel
Can be filled up to maximum quantity indicated in the table
here above, taking into account the minimum order quantity.
When quantity ordered is between the MOQ and the
maximum reel capacity, only one reel is provided.
When several reels are needed for ordered quantity
within MOQ and maximum reel capacity: Please consult
Vishay Sfernice for specific ordering code.
Vishay Sfernice
MARKING
(1)
On the primary package, printed information includes
Vishay S.A. trademark series and model, schematic number
of resistors, ohmic value, absolute tolerance, ratio tolerance,
type of termination: B tinned over nickel barrier.
Marking on parts:
All resistors inside network have same ohmic value:
If number of resistors inside network < or = 3
4
3
C
M
1
R1
8
7
For instance ohmic value 13K:
Coded 1302: M = 1, C = 3, D = 0, U = 2
If number of resistors inside networks > 3
6
5
M
1
R1
C
2
R2
D
3
R3
D
2
R2
U
U
4
R4
3
POWER RATING
Axis Title
120
100
2nd line
Rated Power (%)
80
60
40
20
100
1000
1st line
2nd line
10000
E.g.: 4 resistors in the network:
Ohmic value 13K: Coded 1302: M = 1, C = 3, D = 0, U = 2
Resistors inside the network have different ohmic value, a
CNW number is assigned by Vishay Sfernice
If number of resistors inside network < or = 3
4
C
M
1
R1
8
7
E.g.: CNW1538: M = 1, C = 5, D = 3, U = 8
If number of resistors inside networks > 3
6
5
M
0
0
20
40
60 70 80
100 120 140 155
Ambient Temperature (°C)
10
1
R1
C
2
R2
D
3
R3
D
2
R2
U
U
4
R4
E.g.: 4 resistors in the network:
E.g.: CNW1314: M = 1, C = 3, D = 1, U = 4
Note
(1)
PRA073 and PRA074 are NOT marked. For CNW of size 073 and 074, only a “dot” is marked to identify R1
PERFORMANCE
TESTS
Overload
Climatic sequences
Thermal shock
Load life
Resistance to solder heat
Moisture resistance
High temperature storage
Note
• Rn: nominal resistance
Revision: 04-Mar-2021
Document Number: 53033
4
For technical questions, contact:
sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
CONDITIONS
CECC REQUIREMENTS
2.5 Un/2 s
-55 °C to +155 °C/5 moisture cycles
-55 °C to +155 °C/5 cycles 30'
1000 h/Pn at 70 °C
260 °C/10 s
0.01 Pn at + 40 °C 93 % RH
1000 h/no load at +155 °C
DRIFTS
ABSOLUTE PER
(Typical Values)
0.05 % Rn + 0.05
Ω
0.1 % Rn + 0.05
Ω
0.05 % Rn + 0.05
Ω
0.1 % Rn + 0.05
Ω
0.05 % Rn + 0.05
Ω
0.1 % Rn + 0.05
Ω
0.1 % Rn + 0.05
Ω
RATIO
0.01 % Rn
0.01 % Rn
0.01 % Rn
0.02 % Rn
0.01 % Rn
0.01 % Rn
0.02 % Rn
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2021
1
Document Number: 91000
Integrated technical exchanges
京公网安备 11010802033920号
EEWORLD
