P1206K1203LNTE

The great wave of intelligence and electrification has already begun. Only by embracing change can we not miss this vibrant era. At the beginning of 2021, the controversy surrounding the topic of "1,...[Details]

Recently, the air-cooled container energy storage system supplied by Lishen Battery for the N'Djamena Energy Storage Photovoltaic Power Station Project in Chad has completed acceptance and will soo...[Details]

Tracking Dual Output Bipolar Power Supply This circuit is used for working power supply in the laboratory. Separation or tracking work is feasible. The regulator in the circuit should be proper...[Details]

 On May 8, Shanghai Xinyang responded to questions from investors at its 2019 online performance briefing and said that the company's KrF thick film photoresist-supported lithography machine had comp...[Details]

The usage of bit is similar to sfr, except that sbit is a bit operation, which is used to assign a specific bit in an sfr to a variable, so that the program can use the variable to clear or set the b...[Details]

In the process of automobile intelligence development, driven by factors such as user demand, technology, policies, and industry norms, the form of automobile keys has gradually evolved from tradit...[Details]

This st-link is used The package says that STM32 uses the 20 pins at the bottom and STM8 uses the 4 pins at the top. There are also wiring instructions for STM8 on the back. I connected the wires...[Details]

1 Original situation The original non-contact current sensor There are roughly three structural modes, as shown in Figure 1. In Figure 1, Example 1 shows that a Hall element is set i...[Details]

Create and add a .h file, and name the file the same as the reference. That is, if you reference led.h, the saved .h file should also be named led.h For example: In the main function, reference ...[Details]

Abstract: With the continuous advancement of electronic technology, some communication devices that were originally only installed on larger platforms can now be installed on smaller platforms thro...[Details]

STM8L_2_CLK： 1.User: Project and main files 2.Hardware：CLK,LED,Delay 3.STM8L15x_StdPeriph_Driver: STM8 comes with library files 4.Debug: The hex file is stored in the EXE folder 5.Function: LED flash...[Details]

1. Electromagnetic flowmeter structure The structure of the electromagnetic flowmeter is mainly composed of magnetic circuit system, measuring tube, electrode, casing, lining and converter. 2. Prin...[Details]

Feedback circuits are widely used in various electronic circuits. Feedback is to feed back part or all of the amplifier output signal (voltage or current) to the amplifier input terminal to compare...[Details]

Its working principle is to use the material of the light-emitting diode: that is, the compound of group III-V elements, to form a semiconductor with a PN junction surface on a single crystal. When th...[Details]

Shanghai, China, October 31, 2024 – Toshiba Electronic Devices & Storage Corporation (“Toshiba”) today announced that it has begun shipping engineering samples of the TB9084FTG, a gate driver I...[Details]