QT294LW7B-100.000MHZ datasheet, PDF

Datasheet> All Categories > Passive components> oscillator> QT294LW7B-100.000MHZ

QT294LW7B-100.000MHZ: DescriptionLVDS Output Clock Oscillator; CategoryPassive components oscillator; File Size17MB，29 Pages; ManufacturerQ-TECH Corporation

Download Datasheet Parametric View All

QT294LW7B-100.000MHZ Overview

LVDS Output Clock Oscillator

QT294LW7B-100.000MHZ Parametric

Parameter Name	Attribute value
Objectid	1346875069
package instruction	GULLWING, SMD, 6 PIN
Reach Compliance Code	compliant
Country Of Origin	USA
YTEOL	6.05
Other features	TR, EMBOSSED; TUBE
maximum descent time	0.6 ns
Frequency Adjustment - Mechanical	NO
frequency stability	75%
Installation features	SURFACE MOUNT
Number of terminals	6
Nominal operating frequency	100 MHz
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
Oscillator type	LVDS
Output load	100 OHM
physical size	8.89mm x 7.37mm x 4.826mm
longest rise time	0.6 ns
Maximum supply voltage	3.465 V
Minimum supply voltage	3.135 V
Nominal supply voltage	3.3 V
surface mount	YES
maximum symmetry	55/45 %

Preview

Download Datasheet

View All

CLASS B+ PRODUCTS

Q-TECH

CORPORATION

HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS

2.5 to 5.0Vdc - 15kHz to 350MHz

• Made in the USA

• ECCN: EAR99

• DFARS 252-225-7014 Compliant:

Electronic Component Exemption

• Broad frequency range from 15kHz to 350MHz

• Rugged 4-point mount (SMD ceramic) or 3 point mount

(Others) shock resistant

• ACMOS, LVCMOS, TTL, LVDS logic

• Tristate Output option (-D)

• Hermetically sealed package

• Fundamental and 3rd Overtone design

• Swept Quartz Crystal or Cultured Quartz Crystal

• Low phase noise and jitter

• Q-Tech does not use pure lead or pure tin in its products

• Custom screening and QCI available with MCM part number

• MIL-PRF-55310/9, /16, /21, /26, /27, /28, /30, /33, /34, ,/35,

/37, /38, /39 equivalent

Features

Ordering Information

Lead Finish:

T = Standard

(*)

S = Solder Dip

(**)

Q T18 8A CD 10S - 1 00. 00 0M H z

Q T 1 88 AC D 10 S - 100.000MHz

Output Frequency

Screening Option:

Per MIL-PRF-38534, Class K (modified)

Per MIL-PRF-55310, Level S

Per MIL-PRF-55310, Level S (modified)

Per MIL-PRF-55310, Level B (modified)

Engineering Model

(Sample part number)

Materials Level

1 = Rad Tolerant Die, Swept Quartz Crystal

2 = Rad Tolerant Die, Cultured Quartz Crystal

3 = Class B Die, Swept Quartz Crystal

Package:

See Pages 5, 22, 23, 24

5.0V

3.3V

5.0V

2.5V

3.3V

2.5V

(QT122, QT128, QT125, Q1T27, Q1T93 & Q1T94 Only)

LW = LVDS

NW = LVDS

Logic & Supply Voltage:

ACMOS (****)

HCMOS

LVCMOS

TTL

LVCMOS

(All B+ Packages)

(Standard offering in LW & NW)

QPDS-0001, Rev M, April 2014 (ECO #10925)

Q-TECH Corporation - 10150 W. Jefferson Boulevard, Culver City 90232 - Tel: 310-836-7900 - Fax: 310-836-2157 - www.q-tech.co m

For Non-Standard requirements, contact Q-Tech Corporation at Sales@Q-Tech.com

Blank = No Tristate

D = Tristate

Tristate Option:

19 =

(*)

(**)

(***)

(****)

Frequency vs. Temperature Code (***):

± 65ppm at -55ºC to +125ºC

± 50ppm at -55ºC to +105ºC

± 75ppm at -55ºC to +125ºC

± 50ppm at -55ºC to +125ºC

±100ppm at -55ºC to +125ºC

± 50ppm at -40ºC to +85ºC

±100ppm at -40ºC to +85ºC

± 15ppm at 23ºC ± 1ºC

± 50ppm at -55ºC to +125ºC reference to F at 23ºC

Gold Plated: 50μ ~ 80μ inches typ.

Hot Solder Dip Sn60/Pb40 per MIL-PRF 55310 is optional for an additional cost

Frequency stability vs. temperature codes may not be available in all frequencies

HCMOS & TTL compatible

1 of 29

CLASS B+ PRODUCTS

Q-TECH

CORPORATION

GENERAL SPECIFICATION

HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS

2.5 to 5.0Vdc - 15kHz to 350MHz

1.1

1.2

2.1

Part Number. The part number shall be as specified in the detail specification.

APPLICABLE DOCUMENTS

SPECIFICATIONS

STANDARDS

MIL-STD-202

Scope. This specification establishes the general quality and reliability requirements for a family of hybrid, hermetically sealed

square wave, B+ crystal oscillators.

Specifications and Standards. Unless otherwise specified, the following documents shall be applicable to this specification to

the extent specified herein.

MIL-PRF-55310 Crystal Oscillators, General Specification For

SCOPE

MIL-PRF-38534 Hybrid Microcircuits, General Specification For

MIL-STD-883

Test Methods for Electronic and Electrical Component Parts

Test Methods and Procedures for Microelectronics

2.2

Conflicting Requirements. In the event of conflict between requirements of this specification and other requirements of the

applicable detail drawing, the precedence in which requirements shall govern, in descending order, is as follows:

b) Applicable Customer detail drawing.

c) This specification.

a) Applicable Customer purchase order.

2.3

Customer Purchase Order Special Requirements. Additional special requirements shall be specified in the applicable Customer

purchase order when additional requirements or modifications specified herein are needed for compliance to special program

or product line requirements

REQUIREMENTS

Item Requirements. The individual item requirements shall be as specified herein and the detail specification.

Terminal Connections. The terminal connections shall be as shown on page 25.

Case Outline. The case outline shall be as specified in the detail specification. (See pages 22 to 24)

Lead Material and Finish. Lead material and finish shall be as shown on page 26.

d) Other specifications or standards referenced in 2.1 herein.

3.1

3.2.1

3.2

3.2.2

3.2.3

3.2.4

3.4

3.5

3.3

Solderability. Leads shall meet the requirements of MIL-PRF-55310/38534 when tested.

Hot Solder Dip. Terminals can be solder dipped Sn60/Pb40 per MIL-PRF-55310 at additional cost. Prefix designated with an

“S”. See sample part number in the “Ordering Information” table.

Maximum Ratings. Unless otherwise specified, the maximum ratings shall as specified in the detail specification.

Design and Construction. The design and construction of the crystal oscillator shall be as specified herein. As a minimum, the

oscillators shall meet the design and construction requirements of MIL-PRF-55310.

Electrical Performance Requirements. The electrical performance requirements shall be as specified herein and the applicable

detail specification.

QPDS-0001, Rev M, April 2014 (ECO #10925)

Q-TECH Corporation - 10150 W. Jefferson Boulevard, Culver City 90232 - Tel: 310-836-7900 - Fax: 310-836-2157 - www.q-tech.co m

2 of 29

CLASS B+ PRODUCTS

Q-TECH

CORPORATION

GENERAL SPECIFICATION (Cont’d)

HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS

2.5 to 5.0Vdc - 15kHz to 350MHz

3.5.1

3.5.3

3.5.4

3.5.5

3.5.2

Construction Technology. The device shall be constructed as a class 2-Type 1 hybrid oscillator of MIL-PRF-55310.

Element Derating. All active and passive elements shall be derated in accordance with the applicable hybrid microcircuit

element requirements of MIL-STD-975. Elements shall not operate in excess of derated values.

Workmanship. The device workmanship shall meet the requirements of MIL-PRF-55310.

Active Elements. The active component shall be derived from lots that meet the Element Evaluation requirements of

MIL-PRF-38534, Class K (for QT100 and QT200), and MIL-PRF-55310, Level B (QT300).

Passive Elements. Element Evaluation shall be as a minimum in accordance with MIL-PRF-55310, Level S for QT100 and

Level B for QT200 And QT300.

3.5.6

3.5.7

3.5.8

3.5.9

Quartz Crystal. Unless otherwise specified by the detail specification, the quartz crystal material for the QT100 and QT300

shall be swept synthetic, grade 2.2 or better and cultured quartz crystal for QT200.

Crystal Mounting. The crystal element shall be three-point minimum mounted in such a manner as to assure adequate crystal

performance when the oscillator is subjected to the environmental conditions specified herein.

Maximum Allowable Leak Rate. The maximum allowable leakage rate shall be as specified by MIL-STD-883, method 1014

based on the internal cavity volume. The hermetic seal (fine and gross leak) tests shall be in accordance with MIL-STD-883,

Method 1014.

Weight. The maximum weight of the crystal oscillator shall be defined on page 26.

3.5.10

3.5.11

3.5.12

Delta Criteria. The crystal oscillator shall meet the parameter delta criteria post burn-in called out in the detail specification.

The change in the parameter (delta) shall be calculated between the initial measurement and the present (interim or final)

measurement.

Marking. Each unit shall be permanently marked with the manufacturer's name or symbol, part number, frequency, lot date

code number, and serial number. The unit shall be marked with the outline of an equilateral triangle near pin 1 to show that it

contains devices which are sensitive to electrostatic discharge.

QUALITY ASSURANCE PROVISIONS

Rework Provisions. Rework shall be in accordance with the provisions of MIL-PRF-55310.

Traceability. Material, element and process traceability requirements shall be as specified by MIL-PRF-55310.

3.5.13

4.1

4.2

4.2.1

4.2.2

Screening. Hybrid crystal oscillators shall have been subjected to and successfully passed all the screening tests as applicable

in Tables I, II, III, IV, V.

Percent Defective Allowable (PDA). The percent defective allowable shall be 2% (Screening Option K, A, C) or 10% ( Screening

Option B) or one device, whichever is greater. PDA accountability shall be based on failures occurring during the second half

of burn-in only. PDA shall be applicable to the +25 ºC static parameters as specified in the delta criteria.

Nondestructive Bondpull. 100% Non-destructive bondpull applicable to screening S, K. A, C.

Responsibility for Inspection. Unless otherwise specified in the contract or purchase order, the supplier shall be responsible for

the performance of all inspection requirements as specified. Customer reserves the right to perform any of the inspections set

forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed

requirements, and to return any product failing to meet the specified requirements.

4.3

Quality Conformance Inspection (QCI). Shall be as outlined in the QCI section for each screening option here-in. All records

shall be traceable to the lot number and unit serial number. Samples used for Group A that pass all tests may be delivered on

contract prior to QCI completion.

QPDS-0001, Rev M, April 2014 (ECO #10925)

Q-TECH Corporation - 10150 W. Jefferson Boulevard, Culver City 90232 - Tel: 310-836-7900 - Fax: 310-836-2157 - www.q-tech.co m

3 of 29

Recommended Resources

FGDF-3 three-phase low-temperature iron-plated power supply trigger circuit

electronic watch circuit

Automatic navigation light

ISC300 universal precision isolation measurement channel circuit

Field output circuit: TA8427

Fourth-order low-pass filter circuit without capacitive components

3G Mobile Phone PA Module Power Management Challenges: Emerging W-CDMA applications with high-speed data connections (HSDPA) present some unique power requirements compared to previous generations. To achieve maximum data rates, the RF PA requires a nomin...; zbz0529 Power technology

C6748 Data width problem: [i=s]This post was last edited by starsdu on 2020-6-11 19:14[/i]I have a question. DSP TMS320C6748 is a 32-bit processor of C6000. The address bus is 32 bits, and the data bus should also correspond t...; starsdu DSP and ARM Processors

Construction of TI cc2541 protocol stack development environment: Due to project requirements, I learned about the Bluetooth 4.0 protocol stack development. In fact, it is just a modification based on the protocol stack made by TI. It is not too difficult and there ...; fish001 Wireless Connectivity

[TI recommended course] #ESD electrostatic protection introduction series video#: //training.eeworld.com.cn/TI/show/course/4478...; 小小中 TI Technology Forum

Power supply - What is the principle of BUCK feedback?: As shown in the figure, unlike the conventional two feedback resistors to collect voltage, In the figure, the feedback resistor is connected to the output end of the power chip and the load power supp...; 普拉卡图 Switching Power Supply Study Group

Application of zero intermediate frequency receiving technology in the design of RFID reader: [8-)] RFID technology RFID (radio frequency identification) technology is an automatic identification technology that has developed rapidly in recent years. The distance of radio frequency identificat...; JasonYoo RF/Wirelessly

Shortcut: L0 L1 L2 L3 L4 L5 L6 L7 L8 L9 LA LB LC LD LE LF LG LH LI LJ LK LL LM LN LO LP LQ LR LS LT LU LV LW LX LY LZ M0 M1 M2 M3 M4 M5 M6 M7 M8 M9 MA MB MC MD ME MF MG MH MI MJ MK ML MM MN MO MP MQ MR MS MT MU MV MW MX MY MZ N0 N1 N2 N3 N4 N5 N6 N7 N8 NA NB NC ND NE NF NG NH NI NJ NK NL NM NN NO NP NQ NR NS NT NU NV NX NZ O0 O1 O2 O3 OA OB OC OD OE OF OG OH OI OJ OK OL OM ON OP OQ OR OS OT OV OX OY OZ P0 P1 P2 P3 P4 P5 P6 P7 P8 P9 PA PB PC PD PE PF PG PH PI PJ PK PL PM PN PO PP PQ PR PS PT PU PV PW PX PY PZ Q1 Q2 Q3 Q4 Q5 Q6 Q8 Q9 QA QB QC QE QF QG QH QK QL QM QP QR QS QT QV QW QX QY R0 R1 R2 R3 R4 R5 R6 R7 R8 R9 RA RB RC RD RE RF RG RH RI RJ RK RL RM RN RO RP RQ RR RS RT RU RV RW RX RY RZ

Popular Components