Note the following points about the program:1. To configure a port 0 pin as an ADC input, the corresponding bit in the APCFG register must be set to 1. The default value of this register selects the p...
What is the trigger hold time of an oscilloscope?
There must be a time interval between the oscilloscope being triggered and the reconnection of the trigger circuit. The trigger suppression time is th...
The microcontroller source program is as follows:#include "5110.h"
unsigned char Font_code[][6] =
{{0x00,0x00,0x00,0x00,0x00,0x00},// (0){0x00,0x00,0x00,0x4F,0x00,0x00},//!(1){0x00,0x00,0x07,0x00,0x07...
[i=s]This post was last edited by BinWin on 2019-7-21 19:42[/i]First of all, they should post nude photos of these two guysX-NUCLEO-IKS01A3 is a multi-sensor board that integrates temperature and humi...
BinWinST Sensors & Low Power Wireless Technology Forum
Family Pet Health Maintenance SystemAuthor: Liang TaoProject BackgroundYoung people today lead fast-paced lives, face high work pressures, and the number of singles is growing. The company of pets can...