[i=s]This post was last edited by Xiao Yuwen on 2021-6-29 17:02[/i]Purpose: To collect a piezoelectric sinusoidal signal of about 100 Hz. I want to output a pulse at the voltage peak with adjustable p...
If you need samples of stepper motor driver chips, please contact me. There are 100 pieces in total, while stocks last. Contact information: QQ570461358...
256 bits of data are input serially and then output through a 16-bit register. Now I modify one of the 16 bits and then output it.
I wrote this in VHDLif (s16_register = x"0088") then -- Determine if ...
The resistor R and the capacitor C are connected in series to the input signal VI, and the capacitor C outputs the signal V0. When the RC (τ) value and the input square wave width tW satisfy: τtW (gen...
[i=s]This post was last edited by RCSN on 2020-7-22 22:22[/i]The author needs to use lgvl for this evaluation. It just so happens that the board he made before has successfully ported it. ESP32-S2 Dev...
In order to adopt interrupt vector remapping instead of rewriting the interrupt vector table, the interrupts used by the APP program and the BSL program are different.A tricky problem was encountered ...