If you want to make the triode work in the amplification area, what is the idea? Do you need to calculatethe three parameters of static working point ib ic VCE? Then what? If you don’t know RB RC, how...
Abstract: The use of ultra-high frequency electronic ballasts can effectively overcome the acoustic resonance problem inherent in high-intensity gas discharge lamps, especially metal halide lamps. A s...
[i=s]This post was last edited by jameswangsynnex on 2015-3-3 19:58[/i]PCA82C251 24V system CAN transceiver I don't know if you have ever used the PCA82C251 chip to make a 24V transceiver. I haven't d...
[i=s]This post was last edited by bigbat on 2021-7-31 19:16[/i]Today, the Pingtou Ge RVB2601 board I tested became a brick, but fortunately it was finally saved. I will record the whole process.
I wan...
Understand the basic knowledge of semiconductors, master the unidirectional conductivity of PN junctions; master the volt-ampere characteristics of ordinary diodes, and be familiar with their working ...
[i=s]This post was last edited by qwqwqw2088 on 2018-7-12 10:20[/i] [size=4]There are several situations in which MOS tubes are damaged by breakdown, namely avalanche damage, device heat damage, built...