[i=s]This post was last edited by SHU_2017 on 2018-12-5 08:49[/i] Background: I designed a vehicle controller to control the movement of three motors. I have encountered the problem of insufficient po...
Hello everyone, for the initial study of SAE1939 protocol, thank you for your help. Please forgive me for any mistakes in the expression. For example, the figure above {:1_138:} is obtained from the q...
AD5621+THS4052ID expects the output voltage range to be -10V to +5V. During debugging, the +-12V current of the op amp is about 10mA, which is basically normal, but the THS4052ID is abnormally hot, ve...
As more industrial applications move toward automation, sensing becomes critical to generating and processing a variety of data, allowing systems to become autonomous and make real-time decisions. Tex...
introduction
The power operation power supply monitoring system is generated with the automatic operation of the power system. The system can perform parameter monitoring, fault alarm and other ...[Details]
The main components of an anti-theft alarm system are composed of an alarm host board, a front-end detector, and an alarm signal sending device (network alarm communication and on-site sound and light...[Details]
IAR fully supports China Micro Semiconductor automotive grade BAT32A series MCU, helping to launch domestic automotive grade "core" products April 2023, Shanghai, China - IAR, the world's leadin...[Details]
Natural gas flowmeter is a kind of instrument that can measure working volume flow or standard volume flow, and it has many advantages and is widely used in the fields of petroleum, chemical industry,...[Details]
The "Integrated Smart Energy Research Report" (hereinafter referred to as the "Report") recently released by the China Electric Power Technology Market Association and the Integrated Smart Energy P...[Details]
This paper introduces the design scheme, system composition, main functions and implementation of a contactless
IC card
warehouse management system, and discusses the system security.
...[Details]
1 General treatment methods for electromagnetic interference
1.1 Overview
Automation systems or monitoring systems are usually subsystems in low-voltage power distribution systems. Th...[Details]
When using an oscilloscope, sometimes the probe is connected to the object under test, and sometimes the cable is connected to the object under test. People usually think that the measurement result o...[Details]
EPCOS is now offering EPCOS snubber circuit capacitors specifically designed for the Velaro high-speed train. The Velaro series was designed by Siemens for the Chinese state-owned railways. Th...[Details]
As new energy vehicles develop to this day, range anxiety is still a problem that needs to be solved. Compared with other ways to increase range, such as battery replacement, does the super charging ...[Details]
The function of pull-up resistor: (1) Used to provide driving capability for OC and OD gate circuits. Take the OC (open collector) circuit as an example: For example, the Darlington tube (actua...[Details]
As part of the Faraday Battery Challenge, a UK Industrial Strategy Challenge Fund, the Faraday Institution will provide four research projects with a four-year grant of £12 million per year to advanc...[Details]
Microsoft Azure DCsv2-Series, based on Intel® Software Guard Extensions (Intel® SGX) and with a hardware-based trusted execution environment (TEE), is now available. Relying on the reliable foundatio...[Details]
As people are becoming more and more environmentally conscious, energy conservation is not only a hot topic, but also a practical action project for important regulatory agencies and leading manufa...[Details]
The inverter is an electrical device that converts AC power into AC power with adjustable frequency. It is widely used in industrial automation, motor drive and other fields. In practical applicati...[Details]