WJM-1D5-C

It is suitable for performance tests such as stretching, peeling, deformation, tearing, heat sealing, adhesion, puncture force, opening force, low-speed unwinding force, and pulling force of plastic ...[Details]

Collaborative robots are robots that can physically interact with humans in a shared working environment . They are designed to be flexible, safe and easy to use. They can improve prod...[Details]

　　1.Choose the installation method 　　There are two installation methods for fixed ultrasonic flowmeter sensors: V method and Z method. 　　V-method: For pipes with a diameter of DN15mm-200mm, the V-m...[Details]

       In modern times where energy problems are becoming increasingly prominent, power semiconductor devices represented by IGBTs are widely used in the field of power electronics due to their excel...[Details]

A few days ago, I used recursion when writing a C51 program. The simple program is as follows: void WRITE_ADD(uchar addr,uchar wbyte)  {      START(); //Send the start signal first      WRITE_BYTE...[Details]

Laptop hard drives have always been one of the focuses of everyone's attention. Therefore, based on everyone's interest, the editor will bring you a relevant introduction to laptop hard dri...[Details]

On the evening of May 13, Zhang Guoquan, director of Xiaomi's mobile phone system software department, posted on Weibo that the development version of Xiaomi 8 is planned to be launched next week, an...[Details]

1. Phase distinction 1. Separate the six wire ends of the stator winding first, and measure them separately with a multimeter or megohmmeter. The two wire ends of the path (with very small res...[Details]

This is the prototype of my car, which is not yet completed. I have been stuck on the servo control part, but I finally got it done today. Next, I will talk about all the parts I paid attention to an...[Details]

introduction The traditional method is to use a video capture card (such as 1394) to capture the video signal and use the corresponding software to transfer it to the PC, which is neither convenien...[Details]

1. Introduction EDA (Electronic Design Automatic) is simply a new technology that uses relevant development software to automatically complete the electronic system designed by software to for...[Details]

In recent years, embedded technology has developed rapidly, and highly integrated processors with single-chip microcomputers and dedicated embedded ARM as the core have emerged, and have been widel...[Details]

This is the signal generator class project I made. The schematic diagram was drawn with proteus and written in C language with keil4.1. The simulation schematic diagram is as follows The microcontr...[Details]

1. Differences between MDK and GNU pseudo instructions When we study assembly code, we will see the following two styles of code: The gnu code starts with: .global _start _start: @Assembly entry ...[Details]

　　 I. Introduction 　　With the rapid development of Internet services and multimedia services, as well as the rapid growth of mobile phone users, "broadband" and "wireless" will play a more importan...[Details]