**Beryllium copper recommended for currents higher than 15 amps (⁄Ω¢∑ clips).
The only controlled copy of this Data Sheet is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is
intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change
design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information con-
tained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
The design is relatively simple. The mobile phone is connected to the microcontroller via UART. The PWM can adjust the speed arbitrarily. Pay attention to the driving voltage of the fan.#include msp43...
There is no specific circuit mentioned, but I just studied the parameters of the diode and found that the power dissipation parameter seems to be around 1W. Assuming a reverse connection protection ci...
2019 Intel FPGA Engineer Application Video! The content mainly focuses on the troubles of FPGA engineers, and teaches everyone how to solve some common problems and imparts tips.Let’s take a look at w...
When the AD PCB is enlarged, there are many white lines, not flying lines, and many horizontal bars. If it is not enlarged, there are only flying lines. Please help, what is going on?...
Taking advantage of the intelligent program control feature of the single-chip microcomputer, a "diode characteristic tester" based on the STC89C52 single-chip microcomputer is designed to quickly tes...[Details]
OverviewMSP430F149
is one of the ultra-low power controllers in the MSP430 series recently launched by Texas Instruments. The power supply voltage range is 1.8V to 3.6V. It can work with batterie...[Details]
Properly maintained rechargeable batteries provide good service and a long life. Maintenance includes regular monitoring of the battery voltage. The circuit in Figure 1 is suitable for most recharg...[Details]
With the rapid development of computer and related microelectronics and optoelectronics technology, LED display screens have rapidly grown into mainstream flat panel display products with their h...[Details]
The timing time in S7 is composed of two parts: the time base and the timing value. The timing time is equal to the product of the time base and the timing value. When the timer is running, the tim...[Details]
The alarm consists of an infrared transmitter, receiver, buzzer and LED indicator. Under normal circumstances, the green LED flashes constantly, indicating that the monitored area is normal. Once s...[Details]
The cmd file is used to indicate how each data, symbol, etc. is divided into each segment and the storage space used by each segment when linking each target file after compilation. Many people ...[Details]
On February 7, the State Grid proposed 12 measures to fully resume construction and promote the resumption of work and production of enterprises, aiming to achieve a resumption of work of no less t...[Details]
On March 28, Intel's ultra-low-power processor Lunar Lake, which will be launched later this year, has now seen its verification test platform for debugging purposes for the first time.
Like t...[Details]
The XMC1300 device is a member of the XMC 1000 series of microcontrollers based on the ARM Cortex-M0 processor core. The XMC1300 series solves the real-time issues required for control of motor contr...[Details]
0 Introduction
In order to ensure that unattended equipment (such as attendance machines, etc.) can still operate after power failure, batteries are usually added as backup power sources. ...[Details]
With SCHURTER's EMC expertise and technology, you can find the most suitable EMC solution for your specific application to eliminate interference with electrical systems and equipment.
...[Details]
Introduction: When programming, the first thing to consider is the feasibility of the program, followed by readability, portability, robustness, and testability. This is the general rule. However, ma...[Details]
It is often assumed that components of electric vehicles would be state-of-the-art, and charging barriers are no exception. After all, charging a car is a frequent, daily necessity. Charging operat...[Details]
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
