Works by Taiwanese netizens: Use ESP32 to drive PC simulated peripherals through UART, I2C, SPI, etc. [b]Usage scenarios[/b] [list] [*]Use PC to drive peripheral devices with I2C/SPI/GPIO/UART interfa...
[i=s]This post was last edited by samyang13 on 2020-10-11 15:08[/i]Hello everyone, I recently tested the output of the PA78 amplifier, which is only used for DC amplification, but found that the rippl...
Wind power Wind energy is usually referred to as the kinetic energy of air flow. Wind power generation is the conversion of the kinetic energy of air flow into electrical energy. Strong winds contain...
[size=4]1: The reference voltage needs to be accurate enough. It is recommended to use an external high-precision reference voltage. [/size] [size=4]2: If the PGA is adjustable, the smaller the gain f...
I would like to share with you another important concept in functional safety - Fault Tolerant Time Interval (FTTI).Fault Tolerant Time Interval is a core concept in ISO 26262, and can also be called ...
SPI-DMA has been added, and the speed is faster than before. The playability is still quite high even with a lower resolution. There is enough ROM and RAM space. However, the SDK peripheral drivers ne...