M2PHS2W-A11-M2/N

1 Introduction High-voltage transmission lines and tower accessories have been exposed to the wild for a long time. They are affected by continuous mechanical tension, electrical flashover, and mater...[Details]

　　This article introduces the application circuit diagram of TDA2009 power amplifier. The maximum working power voltage is 28V, and the output power is 2×10W. The typical working power voltage is 24V...[Details]

1. DMF and its production process 　　DMF (dimethylformamide) is a transparent liquid that is miscible with water and most organic solvents. It can cause combustion and explosion when exposed to open f...[Details]

The latest research results recently published in the magazine "Science" show that an all-solid-state battery with large capacity and large current characteristics has been successfully realized, mak...[Details]

As a global leading lithium battery solution provider, Mingmei New Energy has always adhered to the principle of "customer-oriented and vigorously developing data-driven innovation". This Mingmei N...[Details]

　　introduction: 　　The function of passive relay protection is: when a fault or abnormal operating condition occurs in the power system, the faulty equipment is automatically removed from the system i...[Details]

1. Connector: A detachable component (except adapters) that is usually attached to cables or equipment for electrical connection of transmission line systems. 2. RF connector: a connector used in ...[Details]

In high frequency conditions, a good use of PWM is to control the output power by controlling the duty cycle, such as controlling the fan speed, the brightness of the LED light, etc. This time, we us...[Details]

Sanya, China, April 29, 2021 - Lenovo Lingtuo Technology Co., Ltd. (hereinafter referred to as "Lenovo Lingtuo"), a leading intelligent data management solution and service provider committed to driv...[Details]

Samsung is not a lucky company that achieved overnight success. Before discovering and building world-class quality, design, and innovation capabilities, it went through a long period of hardship and...[Details]

　　 introduction 　　The Serial Peripheral Interface (SPI) bus technology is a high-speed synchronous serial input/output interface introduced by Motorola. In recent years, it has been widely used in ...[Details]

Electromagnetic flowmeter is a new type of flow measurement instrument that emerged with the development of electronic technology in the 1950s and 1960s. It has been widely used in the measurement fi...[Details]

1. LEDs used in backlight modules have the advantage of saving power LED is used as a light source in the backlight module to replace the traditional cold cathode fluorescent lamp (CCFL). It i...[Details]

Keil C is a very good C51 compiler, probably the best C51 compiler, providing various optimization modes, and doing a very good job of optimizing variables and arranging addresses. This is one of the ...[Details]

The converter of the electric vehicle charger works at high frequency, which will cause harmonic pollution to the power grid. Effective measures (such as power factor correction or reactive power com...[Details]