-
There has always been controversy over whether autonomous driving should be achieved in one step, like Waymo, and directly enter Level 4, or whether it should be advanced step by step from Level 1 to...[Details]
-
1. Increasing server density By the end of 2020, the digital universe (a measure of all digital data created, copied, and consumed in a year) will reach 40 zettabytes (40×1024 bytes), a 50-fo...[Details]
-
According to the characteristics of low-pressure sodium lamps, the following requirements are placed on electronic ballasts.
1) Provide a sufficiently high starting voltage between the ...[Details]
-
If software is involved in an M&A transaction, it is critical to identify open source components in the target code base. When M&A transactions are in progress, what is contained in the code is criti...[Details]
-
On July 1, Unigroup Tongxin THD89, a subsidiary of Unigroup Guoxin, became the first domestic product to pass the CC EAL 6+ security certification recognized by the international SOGIS. CC (Common Cr...[Details]
-
1 Introduction In today's world, electronic technology is developing rapidly, and digitalization, networking, and informatization have affected people's clothing, food, housing, and transportation....[Details]
-
Powerint's 4.3W PFC LED driver uses the LinkSwitchTM-PL series LNK458KG, which is mainly used for B10 replacement lamps. The efficiency is greater than 86% at 115 VAC input and 48V output, and grea...[Details]
-
A few days ago, I was writing a program and encountered a problem. The baud rate commonly used by the 51 microcontroller is 9600, but the baud rate of the module used is 115200. The program was writt...[Details]
-
The power-on reset (POR) pulse is generated by the on-chip detection circuit. The detection levels are listed in Table 19. POR is generated when VCC falls below the detection level. The POR circuit c...[Details]
-
1 Introduction
Civilian non-power nuclear technology is a high-tech technology encouraged by the state. Among them, nuclear logging technology is one of the cutting-edge logging technolo...[Details]
-
PLC is used to control and automate industrial and manufacturing processes. It is mainly used to monitor, control and optimize machines, equipment and processes that implement various functions, su...[Details]
-
1 Introduction Because of its advantages of simplicity, practicality, high reliability, good performance-price ratio and small size, single-chip microcomputers have been rapidly developed in various ...[Details]
-
1 Introduction
The design of this frequency meter is based on the AT89C51 single-chip microcomputer, and uses its internal timer/counter to complete the measurement of the period/frequency of...[Details]
-
introduction
Once a new IC is designed, the designer must simulate the circuit to test its basic functionality. The most commonly used simulation program, PSpice®, can be used to generate Spice m...[Details]
-
1. Introduction
With the development of online video platforms, users' demand for 4K high-definition quality is growing. However, many users have found that even if they have purchased m...[Details]
Domestic Chip Exchange
京公网安备 11010802033920号
EEWORLD