There is a description of the bleeder resistor on the Internet. In summary, this resistor can help stabilize the output voltage of the front end, but the following description is a bit confusing. He s...
[i=s]This post was last edited by zjd01 on 2019-8-27 20:09[/i]The TGF4042 signal generator can output a sweep signal, which can be used in conjunction with an oscilloscope to perform frequency sweep a...
I am using stc15w204s, and the address setting of the dip switch is connected to the four I/O ports of the microcontroller. However, after powering on the dip switch circuit, the light of the microcon...
For technology companies, it is of course of utmost importance to be at the forefront of developing cutting-edge technologies for customers and the industry. The technology landscape is changing every...
[i=s]This post was last edited by Feihong Haojie on 2019-7-25 15:40[/i]As a dual-channel function generator, the TGF4042 signal generator has built-in multiple function modes in addition to some commo...
This article and design code were written by FPGA enthusiast Xiao Meige. Without the author's permission, this article is only allowed to be copied and reproduced on online forums, and the original au...