Today’s data centers need to process massive amounts of data from millions of mobile devices and other items that make up the Internet of Things. To keep these facilities running properly, data center...
1. Causes and solutions for film deformation:
Cause: (1) Temperature and humidity control failure (2) Exposure machine temperature rise is too high Solution: (1) Normally, the temperature is con...
I have a 28377S board, and I also had a 28379D board that burned out when using ADC. Recently, I want to use a CAN bus, so I found the 28377S board and entered the product page of TMS320F28377S. There...
This article has no tests, but designs the hardware expansion part and designs a peripheral CAN communication test board on the expansion port of the development board.1. Test board design picture2. P...
[i=s]This post was last edited by Jacktang on 2019-2-13 19:52[/i] MOS tubes often heat up during circuit design, and the heating of MOS tubes indicates that it is operating incorrectly. In order to pr...
From the processing principle, CNC engraving machine is a kind of drilling and milling combined processing. It is a typical mechatronics product and has a wide range of market applications in mold eng...