[i=s]This post was last edited by Wuhuaizai on 2021-9-23 15:43[/i]Has any forum member used the CXA-L10A inverter?
The nominal oscillation frequency is 30KHz. Why is there a 50HZ signal after full-bri...
[i=s]This post was last edited by Youayou on 2020-4-9 15:03[/i]Hardware equipment : Omron encoder, 100p/r, translation stage (xy), stepper motor, data acquisition card. The screw lead is 5mm, and the ...
PWM is widely used in microcontrollers. Its basic principle is very simple, but its meaning is often not exactly the same when applied in different occasions. Here I will first introduce the basic con...
Compilation environment of KEIL 4 80251
The code is as follows:
while(1){ee=1;display(ee);delay_ms(3000);WDTRST=0x1E;WDTRST=0xE1;ee=2;display(ee);delay_ms(3000);WDTRST=0x1E;WDTRST=0xE1;ee =3;display(e...
Today, when I was running the BlueNRG-Mesh firmware on STEVAL-IDB007V1, I measured the current. When it was not connected to the mobile phone, the current was about 10mA, and after the connection, the...