It is recommended that the temperature of the part does not exceed 125°C
under worst case operating conditions.
Ambient temperature: -40°C to +85°C (refering to IR)
Operating temperature: -40°C to +125°C
Storage temperature (on tape & reel): -20°C to +40°C; 75% RH max.
Test conditions of Electrical Properties: 20°C, 33% RH
if not specified differently
DESCRIPTION
WE-LQ SMD Inductor
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
Order.- No.
SIZE
A4
3.1
3.0
REV
2012-11-13
2006-07-14
DATE
SSt
UB
BY
MST
-
CHECKED
744045210
Size: 1812
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.
Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before
the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
F Typical Inductance vs. Current Characteristics:
DESCRIPTION
WE-LQ SMD Inductor
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
Order.- No.
SIZE
A4
3.1
3.0
REV
2012-11-13
2006-07-14
DATE
SSt
UB
BY
MST
-
CHECKED
744045210
Size: 1812
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.
Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before
the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
G Packaging Specification: [mm]
DESCRIPTION
WE-LQ SMD Inductor
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
Order.- No.
SIZE
A4
3.1
3.0
REV
2012-11-13
2006-07-14
DATE
SSt
UB
BY
MST
-
CHECKED
744045210
Size: 1812
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.
Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before
the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
H Soldering Specifications:
H1: Classification Reflow Profile for SMT components:
H2: Classification Reflow Profiles
Profile Feature
Preheat
- Temperature Min (Tsmin)
- Temperature Max (Tsmax)
- Time (ts) from (Tsmin to Tsmax)
Ramp-up rate (TL to TP)
Liquidous temperature (TL)
Time (tL) maintained above TL
Peak package body temperature (Tp)
Time within 5°C of actual peak temperature (tp)
Ramp-down rate (TP to TL)
Time 25°C to peak temperature
refer to IPC/JEDEC J-STD-020D
Pb-Free Assembly
150°C
200°C
60-180 seconds
3°C/ second max.
217°C
60-150 seconds
See Table H3
20-30 seconds
6°C/ second max.
8 minutes max.
H3: Package Classification Reflow Temperature
Package Thickness
PB-Free Assembly
PB-Free Assembly
PB-Free Assembly
refer to IPC/JEDEC J-STD-020D
< 1.6 mm
1.6 - 2.5 mm
≥ 2.5 mm
Volume mm³
<350
260°C
260°C
250°C
Volume mm³
350 - 2000
260°C
250°C
245°C
Volume mm³
>2000
260°C
245°C
245°C
DESCRIPTION
WE-LQ SMD Inductor
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
Order.- No.
SIZE
A4
3.1
3.0
REV
2012-11-13
2006-07-14
DATE
SSt
UB
BY
MST
-
CHECKED
744045210
Size: 1812
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.
Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before
the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
I Cautions and Warnings:
The following conditions apply to all goods within the product series of WE-LQ
of Würth Elektronik eiSos GmbH & Co. KG:
General:
All recommendations according to the general technical specifications of the data-sheet have to be complied with.
The disposal and operation of the product within ambient conditions which probably alloy or harm the wire isolation has to be avoided.
If the product is potted in customer applications, the potting material might shrink during and after hardening. Accordingly to this the product
is exposed to the pressure of the potting material with the effect that the core, wire and termination is possibly damaged by this pressure and
so the electrical as well as the mechanical characteristics are endanger to be affected. After the potting material is cured, the core, wire and
termination of the product have to be checked if any reduced electrical or mechanical functions or destructions have occurred.
The responsibility for the applicability of customer specific products and use in a particular customer design is always within the authority of
the customer. All technical specifications for standard products do also apply for customer specific products.
Cleaning agents that are used to clean application might damage or change the characteristics of the component, body, pins or termination.
Direct mechanical impact to the product shall be prevented as the iron powder material of the core could flake or in the worst case it could
break.
Product specific:
Follow all instructions mentioned in the datasheet, especially:
•The solder profile has to be complied with according to the technical reflow soldering specification, otherwise no warranty will be sustai-
ned.
•All products are supposed to be used before the end of the period of 12 months based on the product date-code, if not a 100% solderabi-
lity can´t be warranted.
•Violation of the technical product specifications such as exceeding the nominal rated current will result in the loss of warranty.
DESCRIPTION
WE-LQ SMD Inductor
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
Order.- No.
SIZE
A4
3.1
3.0
REV
2012-11-13
2006-07-14
DATE
SSt
UB
BY
MST
-
CHECKED
744045210
Size: 1812
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.
Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before
the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
What is an antenna vibrator : https://training.eeworld.com.cn/course/5791This course will share with you some basic knowledge about antenna oscillators....
I finally received the development board today. When I unpacked it, I saw the development board and debugging tools shown in Figure 1.Figure 1 Development board and debugging tools
After power-on, exc...
Electric motorcycles have become popular in the market in recent years due to their advantages of energy saving, emission reduction, space saving and easy driving, and their sales have been rising ste...
[size=4]This article summarizes some common errors and precautions when using MSP430G2553 for experiments. The software used is CCS8.0 for your reference. The specific project will not be given. If yo...
On June 2, according to Sina Guangdong Weibo, a fire broke out at Foxconn in Guanlan, Longhua District, Shenzhen, Guangdong. Flames shot up into the sky, black smoke filled the air, and explosions wer...
Photoelectric liquid level sensor is a sensor that uses optical principles to measure the height of liquid. It usually consists of a transmitter and a receiver. The emitter will emit a beam of light ...[Details]
0 Introduction
Against the backdrop of increasing global environmental pollution and fossil energy shortages, the development of new energy vehicles represented by pure electric vehicles has a...[Details]
The size of my color screen is 240*320~ Following is the code //common.h #ifndef __COMMON_H__ #define __COMMON_H__ #include reg52.h #include intrins.h typedef unsigned int uint; typedef unsign...[Details]
GaN FETs are becoming increasingly popular in power systems such as high-frequency DC-DC converters. As a result, most major players in power electronics have introduced gallium nitride (GaN) power...[Details]
According to Reuters, the US government announced on Monday local time that it will auction 100 megahertz mid-band spectrum starting in mid-2022 to expand 5G network coverage in the United States. ...[Details]
The concept and characteristics of "embedded analytics" As we know, embedded analytics technology integrates embedded systems with human rationality, enabling systems to analyze information ...[Details]
Single-chip control systems are widely used in production and life, whether it is simple wired control or wireless remote control, it can be seen that single-chip is very important in the field of ...[Details]
According to foreign media reports, Natrion announced the performance data of patented compounds used in lithium metal negative electrode soft-pack batteries. The results show that the cell exhibits ...[Details]
Foxconn, a major electronics contract manufacturer, announced its April revenue. Benefiting from the two consecutive months of strong shipments of consumer electronics products and the stabilization ...[Details]
Driven by the emergence of new application markets, the scale of the LED market has increased rapidly in recent years. In 2005, China's LED production reached 26.21 billion units, and the market scale...[Details]
A few days ago, Wenjie responded to the M7 high-speed collision accident. One thing that can be seen from the accident is that there are currently multiple factors affecting
the intelligent dri...[Details]
Returning to our example, the offset error in both cases can be obtained as follows:
2.5V基准时+8mV的失调误差相当于12位ADC具有13LSB的误差(8mV/[2.5V/4096])。虽然分辨率仍是12位,但是你必须从每次转换结果中扣除13个码以补偿失调误差。值得注意的是,实际上这时的可测量满量程...[Details]
After a few days of preheating, Xiaomi finally launched its first ever 4K professional monitor. The official name of this product is Xiaomi Monitor 27-inch 4K. The new Xiaomi monitor model is XMMNT...[Details]
China Energy Storage Network News:
The cumulative number of registered users has exceeded 60,000, 23,000 energy-consuming enterprises have settled in, and 838 service providers have been ca...[Details]
Recently, an investor asked questions about NavInfo's AC8015 and AC8025 smart cockpit chips on an interactive platform. In response, NavInfo said that the market promotion of the AC8015 smart cockpit...[Details]