In Cadence, I want to reserve the position of components in the PCB design. How can I do it in the schematic to achieve the purpose of reservation? For example, the components in the figure below, I j...
Please tell me why the filter circuit on the right side of the voltage reference source on the left is designed in this way, how to analyze this circuit (the part on the left side of the 100Ω resistor...
I want to use this chip to control the power supply recently, but the data sheet doesn't seem to explain it in detail. I want to ask if this chip can be directly controlled by FPGA or does it need to ...
It is stipulated that delay functions cannot be used, only timers can be used
Please help me find out what is wrong. It didn't work in the end.#include STC12C5A60S2.Hunsigned int Count_disturb = 0; //...
[size=4]Direct Memory Access (DMA) is a method that uses hardware to implement high-speed data transfer between memory and memory or between memory and I/O devices, without CPU intervention. This meth...
I am making an RF board, and I use 0402 for resistor and capacitor packages. I put 0.2mm vias on the pads of the 0402 package, and covered the vias with oil. Is this OK? Although there will be no tin ...