Hermetically sealed ceramic package and metal cover
Environmental Characteristics
Vibration:
Shock:
Soldering Process;
Notes:
Vibration per Mil Std 883E Method 2007.3 Test Condition A.
Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B.
RoHS compliant lead free. See soldering profile on page 4.
1. Includes calibration @ 25°C, frequency stability vs. change in temperature, supply voltage and load variations, shock and vibration and 20 years aging.
2. When the oscillator is disabled the outputs go to tri-state level (high impedance) which floats to V
OL
. Outputs are enabled with no connection on E/D pad.
3. LVPECL outputs must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent.
4. Vod is measured with a 100 ohm resistor between the true and the complementary outputs.
Phase Noise Plot
Bulletin
Page
Revision
Date
Specifications subject to change without notification. See Connor-Winfield's website for latest revision. All dimensions in inches.
We all see base stations every day, and we often see the large plate-shaped antennas hanging on the towers, but what does it look like inside and how it works? Let me share with you! (Part of the cont...
If any forum friends know, please tell me. The previous chip was a 51 core, and the screen was a segment code screen. Now I want to change it to an OLED screen. I feel that the chip cannot drive the O...
There are many types of analog signal sensors according to their uses, such as gas sensors, temperature sensors, pressure sensors, light sensors, soil moisture sensors and flame sensors.
1. Light dete...
Thank you + my family for your understanding and support! + Thank you to my new colleagues for their generous help along the way! + Thank you to the leaders of my company for their trust in me! + Than...
As we all know, there is such a vivid metaphor in the electronics industry: if the MCU is compared to the "brain" of the circuit, then the crystal oscillator is undoubtedly the "heart". Similarly, the...