Parallel - Fundamental Quartz Crystal, 19.999MHz Nom, SMD, 4 PIN
ABM81-19.999MHZ-18-E1Y Parametric
Parameter Name
Attribute value
Is it Rohs certified?
conform to
Objectid
145206899272
package instruction
SMD, 4 PIN
Reach Compliance Code
unknown
Country Of Origin
Mainland China
YTEOL
7.23
Ageing
2 PPM/FIRST YEAR
Crystal/Resonator Type
PARALLEL - FUNDAMENTAL
Drive level
10 µW
frequency stability
0.003%
frequency tolerance
10 ppm
JESD-609 code
e4
load capacitance
18 pF
Installation features
SURFACE MOUNT
Nominal operating frequency
19.999 MHz
Maximum operating temperature
70 °C
Minimum operating temperature
physical size
3.2mm X 2.5mm X 0.65mm
Series resistance
70 Ω
surface mount
YES
Terminal surface
Nickel/Gold (Ni/Au)
ABM81-19.999MHZ-18-E1Y Preview
CERAMIC SMD CRYSTAL
ABM8
Moisture Sensitivity Level (MSL) – This product is Hermetically Sealed and not Moisture
Sensitive - MSL = N/A: Not Applicable
Pb
RoHS
Compliant
3.2 x 2.5 x 0.8mm
FEATURES:
• Seam sealed package assures high reliability
• Tight tolerance and stability available
• Suitable for RoHS reflow
APPLICATIONS:
• High density applications
• Modems, communication and test equipment
• PMCIA, Wireless applications
STANDARD SPECIFICATIONS:
Parameters
Frequency Range
Operation Mode
Operating Temperature
Storage Temperature
Frequency Tolerance @+25°C
Frequency Stability over the Operating
Temperature ( ref. to +25°C)
Equivalent series resistance (R1)
Shunt capacitance (C0)
Load capacitance (CL)
Drive Level
Aging
Insulation Resistance
TABLE 1- Standard ESR
Frequency (MHz)
10.000 -11.999 (Fund)
12.000 -15.999 (Fund)
16.000 -19.999 (Fund)
20.000 - 29.999 (Fund)
-2
500
ESR( )
max
200
120
70
50
Minimum
10.000
Typical
Maximum
125.000*
Units
MHz
Notes
Contact Abracon for
available F<10MHz
10MHz - 54MHz
64MHz - 125MHz
Please contact Abracon for
available frequencies
Fundamental
3rd Overtone
(Standard Frequencies: 64, 66, 66.6666, 75,
80, 98.304, 100, 125MHz)
-10
+60
-55
+125
-50
+50
-50
See table 1 below
3.0
18.0
10
100
+2
+50
ºC
ºC
ppm
ppm
pF
pF
µW
ppm
M
(see options if other than STD)
Standard
Standard
Standard
(see options if other than STD)
(see options if other than STD)
Standard
(See options if
other than STD)
@25°C±3°C
First year
@ 100Vdc ± 15V
ESR( )
max
40
35
120
80
Frequency (MHz)
30.000 - 39.999 (Fund)
40.000 - 54.000 (Fund)
64.000 - 80.000 (3rd OT)
98.304 - 125.000 (3rd OT)
OPTIONS AND PART IDENTIFICATION: (Left blank if standard)
ABM8
Height (mm)
Blank: 0.80 max
1: 0.65±0.05
2: 0.60±0.10
Frequency in MHz
Please specify the
frequency in MHz.
e.g. 16.000MHz
Load Capacitance (pF)
Please specify CL (min
6pF) in pF or S for series
Custom ESR if
other than standard
R
: Specify a value in
(e.g.: R40)
Operating Temp.
E
Blank: -10°C ~ +60°C
E: 0°C ~ +70°C
B: -20°C ~ +70°C
C: -30°C ~ +70°C
N: -30°C ~ +85°C
D: -40°C ~ +85°C
J**: -40°C ~ +105°C
K**: -40°C ~ +125°C
** Frequency stability ±
50ppm and ± 100 ppm
-
MHz -
-
-
-
Packaging
Blank: Bulk
T: 1kpcs / reel
T2: 250pcs / reel
T3: 3kpcs / reel
Freq. Stability
Blank: ± 50 ppm
U: ± 10 ppm(*)
G: ± 15 ppm
X: ± 20 ppm
W: ± 25 ppm
Y: ± 30 ppm
H: ± 35 ppm
Q: ± 100 ppm
(*) Option E, B, and
-10°C to +60°C only.
Freq. Tolerance
Blank: ± 50 ppm
1: ± 10 ppm
7: ± 15 ppm
2: ± 20 ppm
3: ± 25 ppm
4: ± 30 ppm
LLC
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ABRACON IS
REVISED: 07-1-20
ISO9001-2015
CERTIFIED
CERAMIC SMD CRYSTAL
ABM8
OUTLINE DRAWING:
Pb
RoHS
Compliant
3.2 x 2.5 x 0.8mm
Note:
Due to material availability, the chamfer could be located
on pin #1, 3, or 4. Be advised that the chamfer location has
no impact on the electrical performance of the device.
Table 2
Height (mm)
ABM8
0.80 max
ABM81
0.65+/-0.05
ABM82
0.60+/-0.10
Dimensions: mm
TAPE & REEL:
Option "-T"
: Tape and reel (1,000pcs/reel) : ABM8, ABM82
Tape and reel (3,000pcs/reel) : ABM81
Option "-T2" : Tape and reel (250pcspcs/reel) : ABM8
Option "-T3" : Tape and reel (3,000pcs/reel) : ABM8, ABM82 only
REFLOW PROFILE:
Zone
1
2
3
Dimensions: mm
Description
Temperature
Time
Preheat
Reflow
Peak heat
T
SMIN
~ T
SMAX
150°C ~ 180°C
T
L
230°C
T
P
260°C
±
5°C
60 ~ 120 sec.
30 ~ 40 sec.
10 sec. MAX
ATTENTION:
Abracon LLC’s products are COTS – Commercial-O -The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica-
tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability
where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment,
written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information.
Thanks to the power supply learning activity organized by EEWORLD, I have learned a lot from reviewing the power supply theory learned in college with the experts. At the same time, I feel that I stil...
The day before yesterday, I got the Nanxin development board and it felt very powerful. The switch tubes are integrated in such a small IC, the maximum current can reach 6A, and it can work in both di...
Require:
1. Bachelor degree, major in power electronics (preferred), more than 5 years of experience in independent design of power supply or new energy hardware;
2. Familiar with analog circuits, MCU...
This year's Munich Electronics Show has ended, but it does not prevent us from using the Munich Exhibition as a clue to discover the beauty of national chips later.
Guan Zai believes that all national...
Two questions about the principle of electronic blood pressure monitor1. The cuff is automatically inflated to a certain pressure (30-50mmHg higher than the systolic pressure). At this time, the systo...
According to the Yangtze River Daily, the total amount of intellectual property transactions in the Wuhan Intellectual Property Exchange in 2020 was 6.421 billion yuan, of which patent transactions a...[Details]
Since the input of PLC is divided into two types: NPN input and PNP input, the proximity switch is also divided into two types: NPN and PNP. Only when the type of proximity switch is consistent wit...[Details]
According to the Korea Times, on the 5th, South Korean Trade Minister Moon Sung-wook held a meeting with executives of South Korean battery companies at Samsung SDI's battery manufacturing plant in t...[Details]
As the Chinese passenger car market is stratified into basic (represented by L0-L2, including partial lane change assistance) and advanced (represented by NOA, point-to-point navigation assistance)...[Details]
Carefully plan projects, accurately introduce projects, and vigorously promote projects. In recent years, Gaotai County has continued to optimize the business environment, closely follow the requireme...[Details]
Double-sided cooling power modules ideal for automotive and industrial equipment!
ROHM develops the industry's thinnest 0.85mm metal plate shunt resistor "PSR350" with 12W rated powe...[Details]
1 Introduction
With the rapid development of the national economy, AC motors have played an extremely important role in industrial production. As the main traction motor in various industries, ...[Details]
On the evening of November 3, blogger @数码闲聊站 broke the news that he heard that a large manufacturer was promoting the scroll screen, which is much cooler than the folding screen. Previously, O...[Details]
Gas chromatograph is becoming more and more popular and widely used as an efficient, fast and highly sensitive analytical instrument. With the advent of the information age, the gas chromatograph is ...[Details]
Digi-Key Electronics, the global distributor of the broadest and fastest-shipping electronic components in stock, has released a new video series titled “Supply Chain Transformation,” which shows how...[Details]
On March 19, the Mexico Solar Energy Exhibition was held in Mexico City. Aiming at multiple market segments such as household, industrial and commercial, and large-scale ground, Sungrow brought a v...[Details]
One topic that cannot be avoided in autonomous driving is which one is better, lidar or camera. This issue has been debated endlessly in the industry. The two major factions have different opinions ...[Details]
There has always been a strange saying about wireless routers, that wireless routers have radiation that will affect human health. There are even articles on public accounts that ask people to turn o...[Details]
GIC is an important component in the ARM system. After understanding the composition and function of GIC, we can understand the general process of IRQ, from the arrival of hardware IRQ to the end o...[Details]