TC
Vishay Sprague
Subminiature, Leaded Solid Tantalum Capacitors
Polar or Non-polar
FEATURES
•
Subminiature package size and light weight
•
Rectangular case with axial or radial leads
•
2 to 50 VDC
•
0.1 µF to 470 µF
•
Operating temperature range: - 55 °C to + 125 °C
•
High stability and reliability
•
Tested in accordance with MIL-PRF-49137
•
Unique and comprehensive custom design capability
ELECTRICAL CHARACTERISTICS
Operating temperature range:
- 55 °C to + 125 °C
Capacitance:
Measured at 120 Hz and 25 °C with a
maximum of 2.2 VDC bias and 1.0 V
rms
signal.
Capacitance Tolerance:
Standard tolerance is ± 20 % for
ratings 0.1 µF and above, and + 40, - 20 % for ratings below
0.1 µF. Special tolerances are also available.
Dissipation Factor:
When measured simultaneously with
capacitance, DF shall not exceed the value shown in
theratings tables.
DC Leakage Current (DCL Max):
When measured with DC voltage applied through a 1000
Ω
resistor for 5 minutes, DC leakage (µA) shall not exceed:
At 25 °C:
Leakage current shall not exceed the values listed
in the Standard Ratings Tables
At 85 °C:
Leakage current shall not exceed 10 times the
values listed in the Standard Ratings Tables
At 125 °C and 66 % of Rated Voltage:
Leakage current
shall not exceed 15 times the values listed in the Standard
Ratings Tables.
Operating Voltage:
Full working voltage up to 85 °C. From
85 °C to 125 °C working voltage derates linearly to 66 % of
the 85 °C working voltage.
APPLICATIONS
•
Hearing aids
•
Portable communications
•
Space/avionics
•
Laptop computers
MECHANICAL SPECIFICATIONS
Solder coated nickel leads (type N32 per MIL-STD-1276) are
standard on all case sizes.
Leads are weldable and/or solderable.
Special leads are available on request (e.g. bare nickel, gold
plated nickel or ribbon leads).
Lead length is 1 1/2” [38.1 mm] minimum on nonpolar parts.
On polar parts the negative lead is 1-1/4” [31.8 mm] minimum
and the positive lead is 1-1/2” [38.1 mm] minimum.
ORDERING INFORMATION
TC
MODEL
1.0
CAPACITANCE
IN µF
35
DC VOLTAGE RATING
AT + 85 °C
C3
CASE CODE
C = Polar
N = Nonpolar
A*
LEAD
CONFIGURATION
A = Axial
R = Radial
M
CAPACITANCE
TOLERANCE
E = + 40, - 20 %
M = ± 20 %
K = ± 10 %
J=±5%
Example of Part Number Code: TC1.0-35C3AM
* To complete part number in rating tables, add A or R.
Change suffix if special capacitance tolerance is required.
www.vishay.com
1
For technical questions, contact: tantalum@vishay.com
Document Number: 43005
Revision: 12-Sep-07
Analogue and Mixed Signal
京公网安备 11010802033920号
EEWORLD
