G4 Digital AC Output Modules
Features
4000 volts optical isolation (transient)
Built-in LED status indicator
Logic levels of 5, 15, and 24 VDC
Removable fuse
Current rating: 3 amps at 45° C
UL Motor Load rating: 1.5 amps
Ability to withstand one-cycle surge of 80 amps
Operating temperature: -30 °C to 70 °C
G4 Digital AC Output Modules
Description
Opto 22’s G4 AC output modules are used to control or switch
AC loads. Each module provides up to 4000 volts of optical
isolation (transient) between field outputs and the control
side of the circuit, and each features zero voltage turn-on and
zero current turn-off. All AC output modules are equivalent to
single-pole, single-throw, normally open contacts (Form A,
SPST-NO) except the G4OAC5A5, which is equivalent to a
single-pole, single-throw, normally closed contact (Form B,
SPST-NC).
Each module is equipped with a 4 amp fast-blow fuse. The
fuse breaking capacity is 40 amps at 250 VAC. Current should
be limited to prevent the short circuit current from exceeding
the rated breaking capacity of the fuse.
The G4OAC5MA and the G4OAC5AMA are special modules
featuring a manual-on/manual-off/automatic switch, ideal for
diagnostic testing of control applications.
Typical applications for AC output modules include switching
loads such as AC relays, solenoids, motor starters, heaters,
lamps, and indicators.
Part numbers ending in FM are Factory Mutual approved.
G4OAC5AMA
G4OAC15
G4OAC15A
G4OAC24
G4OAC24A
G4OAC5A and
G4OAC5AMA Modules
Part Numbers
Part
G4OAC5
G4OAC5FM
G4OAC5A
G4OAC5AFM
G4OAC5A5
G4OAC5A5FM
G4OAC5MA
Description
G4 AC Output 12–140 VAC, 5 VDC Logic
G4 AC Output 12–140 VAC, 5 VDC Logic,
Factory Mutual Approved
G4 AC Output 24–280 VAC, 5 VDC Logic
G4 AC Output 24–280 VAC, 5 VDC Logic,
Factory Mutual Approved
G4 AC Output 24–280 VAC, 5 VDC Logic
NC
G4 AC Output 24–280 VAC, 5 VDC Logic
NC, Factory Mutual Approved
G4 AC Output 12–140 VAC, 5 VDC Logic
With Manual/Auto Switch
G4 AC Output 24–280 VAC, 5 VDC Logic
With Manual/Auto Switch
G4 AC Output 12–140 VAC, 15 VDC
Logic
G4 AC Output 24–280 VAC, 15 VDC
Logic
DATA SHEET
Form 0252-130503
G4 AC Output 12–140 VAC, 24 VDC
Logic
G4 AC Output 24–280 VAC, 24 VDC
Logic
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
PAGE
1
More About Opto 22
Products
Opto 22 develops and manufactures reliable, flexible, easy-to-
use hardware and software products for industrial automation,
energy management, remote monitoring, and data
acquisition applications.
SoftPAC, OptoOPCServer, OptoDataLink, options for controller
redundancy or segmented networking, and support for legacy
Opto 22 serial
mistic
™
I/O units.
SNAP PAC Brains
While SNAP PAC controllers provide central control and data
distribution, SNAP PAC brains provide distributed intelligence
for I/O processing and communications. Brains offer analog,
digital, and serial functions, including thermocouple
linearization; PID loop control; and optional high-speed digital
counting (up to 20 kHz), quadrature counting, TPO, and pulse
generation and measurement.
SNAP I/O
I/O provides the local connection to sensors and equipment.
Opto 22 SNAP I/O offers 1 to 32 points of reliable I/O per
module, depending on the type of module and your needs.
Analog, digital, and serial modules are all
mixed on the same mounting rack and
controlled by the same processor (SNAP
PAC brain or rack-mounted controller).
OptoEMU Energy Management System
The easy-to-use OptoEMU Sensor monitors electrical energy
use in your facility and delivers detailed, real-time data you
can see, analyze, and use in building and control systems. The
Sensor can monitor energy data from pulsing meters,
electrical panels or subpanels, and equipment. View energy
data online using a software service or incorporate the data
into your control system for complete energy management.
SNAP PAC System
Designed to simplify the typically complex
process of selecting and applying an
automation system, the SNAP PAC
System consists of four integrated
components:
•
SNAP PAC controllers
•
PAC Project
™
Software Suite
•
SNAP PAC brains
•
SNAP I/O
™
SNAP PAC Controllers
Programmable automation controllers
(PACs) are multifunctional, modular controllers based on
open standards.
Opto 22 has been manufacturing PACs for over two
decades. The standalone SNAP PAC S-series, the rack-mounted
SNAP PAC R-series, and the software-based SoftPAC™ all
handle a wide range of digital, analog, and serial functions for
data collection, remote monitoring, process control, and
discrete and hybrid manufacturing.
SNAP PACs are based on open Ethernet and Internet Protocol
(IP) standards, so you can build or extend a system easily,
without the expense and limitations of proprietary networks
and protocols. Wired+Wireless™ models are also available.
PAC Project Software Suite
Opto 22’s PAC Project Software Suite provides full-featured,
cost-effective control programming, HMI (human machine
interface) development and runtime, OPC server, and
database connectivity software for your SNAP PAC System.
Control programming includes both easy-to-learn flowcharts
and optional scripting. Commands are in plain English;
variables and I/O point names are fully descriptive.
PAC Project Basic offers control and HMI tools and is free for
download on our website,
www.opto22.com.
PAC Project
Professional, available for separate purchase, adds one
Quality
Founded in 1974, Opto 22 has established a
worldwide reputation for high-quality
products. All are made in the U.S.A. at our
manufacturing facility in Temecula,
California. Because we test each product
twice before it leaves our factory, rather
than only testing a sample of each batch,
we can guarantee most solid-state relays
and optically isolated I/O modules for life.
Free Product Support
Opto 22’s California-based Product Support Group offers free,
comprehensive technical support for Opto 22 products. Our
staff of support engineers represents decades of training and
experience. Support is available in English and Spanish by
phone or email, Monday–Friday, 7 a.m. to 5 p.m. PST.
Additional support is always available on our website: how-to
videos, OptoKnowledgeBase, self-training guide,
troubleshooting and user’s guides, and OptoForums.
In addition, hands-on training is available for free at our
Temecula, California headquarters, and you can
register online.
Purchasing Opto 22 Products
Opto 22 products are sold directly and through a worldwide
network of distributors, partners, and system integrators. For
more information, contact Opto 22 headquarters at 800-321-
6786 or 951-695-3000, or visit our website at
www.opto22.com.
www.opto22.com
© 2013 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
www.opto22.com • Opto 22
• 43044 Business Park Drive • Temecula, CA 92590-3614 • Form 1335-121210
SALES
800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com •
SUPPORT
800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
京公网安备 11010802033920号
EEWORLD
