2113-S5-25-30

I haven't taken notes for two days. It's not that I'm lazy, because I have written quite a few programs in these two days, but there are some problems that I haven't figured out, so I didn't take not...[Details]

A typical remote monitoring system consists of two parts: hardware system and software system. (1) Hardware system. The hardware structure of the monitoring system is shown in Fig...[Details]

The mortality rate of cardiovascular diseases is rising worldwide, seriously endangering human health. As for heart failure (HF), there are about 23 million patients worldwide, and 2 million new pati...[Details]

The power supply circuit design of DSP is an important part of DSP application system design. The TIDSP family (C6000 and C54xx) requires independent core power supply and I/O power supply. For exa...[Details]

Similar to planning a trip based on weather forecasts, the new Ford F-150 and Mustang Mach-E models will be able to adjust their trips based on traffic forecasts, thanks to an innovation from locatio...[Details]

Aiming at the shortcomings of low efficiency and subjective influence of manual testing, an automatic test system for HDTV main control board based on LabVIEW was designed. The audio and video image ...[Details]

First, look at the interrupt vector table in iom16.h in iar /* NB! vectors are specified as byte addresses */ #define    RESET_vect           (0x00) #define    INT0_vect            (0x04) #define...[Details]

Author of this article: Karl Wachswender, industrial chief system architect at Lattice  Over the past decade, a host of innovative solutions—from artificial intelligence (AI) and machine learning (...[Details]

Trustzone can be traced back to more than ten years ago, when ARMv7 was released, but unfortunately there has been no practical application. It was not until recent years that manufacturers began to ...[Details]

        According to MacRumors, Apple is expected to release four new iPhone 14 models in September. In a research report, analyst Jeff Pu said that all iPhone 14 models will use ProMotion displays. ...[Details]

P2.0~P2.2 are connected to independent buttons K0, K1, and K2 respectively. P1 is connected to 8 LEDs, which light up when the output is low level. Require: Press the K1 key, P1.7 outputs a squ...[Details]

RISC-V cores are starting to appear in heterogeneous SoCs, marking a move from standalone designs to mainstream applications, where they are used in everything from accelerators and processors to sec...[Details]

       Well, I have to admit that I am very used to using Freescale's XS128 microcontroller. But when I first started using atmega8, what I disliked the most was that atmega8 could not operate the IO...[Details]

Circuit composition The figure below is the electrical schematic diagram of the sound, light and touch three-control delayed self-extinguishing switch. The circuit consists of a power supply...[Details]

On October 23, we learned from the official that Ideal Intelligent Driving "end-to-end + VLM" has officially started full push, including all models under the AD MAX platform. The new generation of...[Details]