.110 2.79
REF
(No OF POS x .050[1.27])
+ .120[2.54] REF
02
N
C
L
FEP CABLE OPTION
-T: FEP
(LEAVE BLANK FOR STANDARD
PVC INSULATION)
No OF POSITIONS
-02 THRU -50 (PER ROW)
WIRE GAUGE (AWG)
-28, -30
TFSDX-XX-XXX-XX-XX.XX-XX-XXX
-NXX OPTION (END 2)
(ONLY AVAILABLE WITH -D,-DL,-T,-TF,TR)
(SEE SHT 3 FOR -D PINOUT)
(SEE SHT 4 FOR -T PINOUT)
-NUS: NOTCH UP, STRAIGHT
-NDS: NOTCH DOWN, STRAIGHT
-NUX: NOTCH UP, CROSSED
-NDX: NOTCH DOWN, CROSSED
END OPTION
-S: SINGLE END
*** -SL: SINGLE END WITH FRICTION LOCK
(SEE SHEET 2, FIG 4)
** -D: DOUBLE END
(SEE SHEET 2, FIG 2)
** -T: TRANSFER END
(SEE SHEET 2, FIG 3 AND SHEET 4)
** -DL: DOUBLE END WITH FRICTION LOCK
***
(SEE SHEET 2, FIG 5)
**
*** -TF: TRANSFER END WITH FRICTION LOCK
(SEE SHEET 2, FIG 6)
** -TR: TRANSFER END W/RETENTION LATCH(SEE
SHEET 5)(MUST CHOOSE FROM -NXX OPTIONS)
(ONLY AVAILABLE IN -05 THRU -50 POS)
ASSEMBLED LENGTH
SPECIFY IN INCHES
(SINGLE END: 03.00 INCH [76.2mm] MINIMUM,
DOUBLE OR TRANSFER END: 03.25 INCH [82.6mm]
MINIMUM)
.240 6.10
REF
01
.153 3.89
REF
.225 5.72
REF
COLOR CODE
LEAVE BLANK FOR ALL BLACK WIRE,
C: COLOR CODED WIRE, SEE COLOR
SEQUENCE TABLE, SHEET 2
(NOT AVAILABLE WITH FEP OPTION)
.050 1.27
REF
.375 9.53
REF
N-1
"A"
-S: SINGLE END
(TFSDX-07-28-XX-XX.XX-S SHOWN)
TFSD-XX-D-S
FIG 1
.562 14.26
REF
.238 6.05
REF
PLATING SPECIFICATION
-H: 30µ" HEAVY GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
-G: 10µ" LIGHT GOLD IN CONTACT AREA,
10µ" GOLD ON TAIL ON TAIL
-F: 3µ" FLASH GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
-GF: 3µ" FLASH GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
(-GF ONLY AVAILABLE TO EXISTING CUSTOMERS,
SEE –F PLATING)
T-1M44-2830-XX
**
***
MUST CHOOSE FROM -NXX OPTIONS
ONLY AVAILABLE ON POS 5, 7, & 10 - 50
C
XX.XX
(SEE NOTE 12)
DWCX-28-XX-300
TABLE 1
SERIES
WIRE
GAUGE
28 AWG
30 AWG
28 AWG
30 AWG
WIRE
DWC-28-XX-300
DWC-30-XX-300
DWCT-28-XX-TC
DWCT-30-XX-TC
PROPRIETARY NOTE
PIN
T-1M44-2830-XX
T-1M44-2830-XX
T-1M44-2830-XX
T-1M44-2830-XX
NOTES:
"A"
SECTION "A"-"A"
C
1.
C
REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM PULLOUT FORCE: 3 LBS [13.3 N].
3. CONTACT MUST BE INSERTED UNTIL
RETENTION FEATURE LOCKS INTO PLACE.
4. ALL FINISHED GOODS ARE TO BE ELECTRICAL TESTED INCLUDING HI-POT TEST AT 300 V.
AFTER FINAL ELECTRICAL TEST, LABEL EACH ASSEMBLY WITH 1 LABEL-ET.
5. TINNED COPPER WIRE IS RoHS COMPLIANT.
6. PARTS TO BE LAYER PACKAGED.
7. END OF DISCRETE WIRE MUST BE IN THE RANGE AFTER CRIMP.
8. REFER TO CRIMP SPECIFICATIONS PRINT FOR CRIMP AND STRIP DIMENSIONS,
TOLERANCES, TOOLING AND ITS REQUIREMENTS.
9. NOTE DELETED.
10. NOTE DELETED.
11. NOTE DELETED.
12. FOR LENGTHS LESS THAN 12 IN, TOLERANCE SHALL
BE ±.125[3.18]. FOR OTHER LENGTHS, TOLERANCES SHALL BE ±2%.
TFSD
TFSD
TFSDT
TFSDT
CONTACT
(ONLY USED WITH -T, -TF &
-TR END OPTIONS)
C-203-2830-XX
C-203-2830-XX
C-203-2830-XX
C-203-2830-XX
F:\DWG\MISC\MKTG\TFSDX-XX-XXX-XX-XX.XX-XX-XXX-MKT.SLDDRW
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
.XX: .01 [.3]
2
.XXX: .005 [.13]
.XXXX: .0020 [.051]
ANGLES
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
MATERIAL:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
INSULATOR: LCP, COLOR: BLACK
CONTACT: BeCu
CABLE INSULATION: SEE CALLOUT
WIRE: DWC: TINNED COPPER.
DWCT: TIN PLATED COPPER
(SEE TABLE 1)
.050[1.27] SOCKET DISCRETE CABLE ASSEMBLY
TFSDX-XX-XXX-XX-XX.XX-XX-XXX
BY:
LENNY K
7/18/06
SHEET
1
OF
5
REVISION Y
-D: DOUBLE END
(TFSDX-07-28-XX-XX.XX-D-NUS SHOWN)
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
FIG 2
-T:TRANSFER END
(TFSDX-07-28-XX-XX.XX-T-NUS SHOWN)
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
FIG 3
-SL: SINGLE END WITH FRICTION LOCK
(TFSDX-07-28-XX-XX.XX-SL SHOWN)
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
FIG 4
-DL: DOUBLE END WITH FRICTION LOCK
(TFSDX-07-28-XX-XX.XX-DL-NUS SHOWN)
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
FIG 5
-TF: TRANSFER END WITH FRICTION LOCK
(TFSDX-07-28-XX-XX.XX-TF-NUS SHOWN)
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
FIG 6
TFSD-XX-D-S
TFSD-XX-D-S-L
TFSD-XX-D-S-L
TFSD-XX-D-S-L
XX.XX
(SEE NOTE 12)
C
XX.XX
(SEE NOTE 12)
C
XX.XX
(SEE NOTE 12)
C
2.107 53.52
(SEE NOTE 12)
C
XX.XX
(SEE NOTE 12)
C
ISDF-XX-D
ISDF-XX-D-L
TFSD-XX-D-S-L
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050[1.27] SOCKET DISCRETE CABLE ASSEMBLY
DESCRIPTION:
DWG. NO.
TFSDX-XX-XXX-XX-XX.XX-XX-XXX
BY:
LENNY K
F:\DWG\MISC\MKTG\TFSDX-XX-XXX-XX-XX.XX-XX-XXX-MKT.SLDDRW
7/18/06
SHEET
2
OF
5
REVISION Y
N
N-1
01
02
N
N-1
N
N-1
02
02
02
01
01
01
N-1
N
NOTCH END 2
NOTCH END 1
NOTCH END 2
NOTCH END 1
(END 2 NOTCH DOWN, CABLE STRAIGHT)
(PIN 1 TO PIN N-1)
(END 2 NOTCH UP, CABLE STRAIGHT)
(PIN 1 TO PIN 2)
N
N-1
01
02
-NDS
-NUS
N
N-1
N
N-1
02
01
N-1
N
02
01
02
01
NOTCH END 1
NOTCH END 2
NOTCH END 2
(END 2 NOTCH DOWN, CABLE CROSSED)
(PIN 1 TO PIN N)
PROPRIETARY NOTE
-NDX
NOTCH END 1
(END 2 NOTCH UP, CABLE CROSSED)
(PIN 1 TO PIN 1)
-NUX
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DO NOT SCALE DRAWING
SHEET SCALE: 1.75:1
.050[1.27] SOCKET DISCRETE CABLE ASSEMBLY
DESCRIPTION:
DWG. NO.
TFSDX-XX-XXX-XX-XX.XX-XX-XXX
BY:
LENNY K
F:\DWG\MISC\MKTG\TFSDX-XX-XXX-XX-XX.XX-XX-XXX-MKT.SLDDRW
7/18/06
SHEET
3
OF
5
REVISION Y
N
02
01
N-1
N-1
N
N
N-1
02
01
01
02
02
01
N
N-1
NOTCH END 2
NOTCH END 2
NOTCH END 1
(END 2 NOTCH DOWN, CABLE STRAIGHT)
(PIN 1 TO PIN 1)
NOTCH END 1
(END 2 NOTCH UP, CABLE STRAIGHT)
(PIN 1 TO PIN N)
T-NDS
T-NUS
N
N-1
N-1
N
N
N-1
02
01
02
01
01
02
02
01
N
N-1
NOTCH END 2
NOTCH END 2
NOTCH END 1
(END 2 NOTCH DOWN, CABLE CROSSED)
(PIN 1 TO PIN 2)
PROPRIETARY NOTE
T-NDX
NOTCH END 1
T-NUX
(END 2 NOTCH UP, CABLE CROSSED)
(PIN 1 TO PIN N-1)
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050[1.27] SOCKET DISCRETE CABLE ASSEMBLY
DWG. NO.
DESCRIPTION:
TFSDX-XX-XXX-XX-XX.XX-XX-XXX
7/18/06
SHEET
4
OF
5
F:\DWG\MISC\MKTG\TFSDX-XX-XXX-XX-XX.XX-XX-XXX-MKT.SLDDRW
BY:
LENNY K
REVISION Y
-TR: TRANSFER END WITH RETENTION LATCH
(TFSDX-07-28-XX-XX.XX-TR-NUS SHOWN)
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
FIG 7
-TR: TRANSFER END WITH RETENTION LATCH
(TFSDX-07-28-XX-XX.XX-TR-NDS SHOWN)
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
FIG 8
-TR: TRANSFER END WITH RETENTION LATCH
(TFSDX-07-28-XX-XX.XX-TR-NDX SHOWN)
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
FIG 9
-TR: TRANSFER END WITH RETENTION LATCH
(TFSSX-07-28-XX-XX.XX-TR-NUX SHOWN)
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
FIG 10
TFSD-XX-D-S
TFSD-XX-D-S
TFSD-XX-D-S
TFSD-XX-D-S
XX.XX
(SEE NOTE 12)
C
XX.XX
(SEE NOTE 12)
C
XX.XX
(SEE NOTE 12)
C
XX.XX
(SEE NOTE 12)
C
ISDF-XX-D-M
ISDF-XX-D-M
ISDF-XX-D-M
ISDF-XX-D-M
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050[1.27] SOCKET DISCRETE CABLE ASSEMBLY
TFSDX-XX-XXX-XX-XX.XX-XX-XXX
7/18/06
SHEET
5
OF
5
F:\DWG\MISC\MKTG\TFSDX-XX-XXX-XX-XX.XX-XX-XXX-MKT.SLDDRW
BY:
LENNY K
京公网安备 11010802033920号
EEWORLD
