-
#include
typedef unsigned char uchar;
typedef unsigned int uint;
//typedef is also a macro definition type, and its writing method is opposite to #define
/*******LCD port initialization*******/ ...[Details]
-
Distributed control system is a new generation of instrument control system based on microprocessor, which adopts the design principle of decentralized control function, centralized display operati...[Details]
-
There are many types of gas detectors because they detect different gases. Among them, the four-in-one gas detector is a type of gas detector that many people use because it can support us to detect ...[Details]
-
At present, smart cockpits have already emerged, and many manufacturers and suppliers have quietly started the research and development of smart cockpits. Some people say that in today's environment,...[Details]
-
Voice broadcast ultrasonic ranging program, voice integrated circuit uses ISD4004 SS connected to P1.2 MOSI connected to P1.0 MISO connected to P1.1 SCLK connected to P1.3. Ultrasonic module uses comm...[Details]
-
The two parties signed a cooperation agreement to provide continuous support for high-quality NAND products. Newburyport, Massachusetts, USA, August 2023 Rochester Electronics joins hands with Sk...[Details]
-
Phenomenon: After the program is burned into the board, the MCU does not start and freezes. It can only run after commenting out some byte arrays. analyze: This is the IAR compilation metho...[Details]
-
In Part 3 of this series on CTSD precision ADCs, we will focus on the alias-free nature of CTSD ADCs, which improves interference immunity without adding any peripheral design. Part 1 presented a new...[Details]
-
1 Clock 1.1 Clock Tree The clock configuration of Stm32 must refer to the clock tree. The clock tree determines the path of the clock configuration. By referring to the RCC register, different cl...[Details]
-
1 Introduction
Switching power supplies are widely used in electronic devices for their small size, light weight and high conversion efficiency. There are many forms of circuit topology, and ...[Details]
-
Abstract : This paper describes the fabrication and application of a mobile chamber (M-Chamber) for characterization of high power measurements on a laboratory bench, such as short circuit measuremen...[Details]
-
Today, R&D and production managers and engineers face many tough challenges, and each group has its own unique needs. For example, in the production phase, engineers need to reduce test time while in...[Details]
-
A/D conversion principle and parameter indicators 1. Sampling Theorem 2. In order to correctly represent the analog signal vi with the sampled signal vs shown in Figure 5.2.2, it must satisfy the fol...[Details]
-
PRBTEK provides a series of testing equipment for automobiles, especially electric vehicles, which can be customized according to user requirements or semi-customized with a series of automatic testi...[Details]
-
Non-contact temperature sensor is a sensor that uses infrared technology to measure the surface temperature of an object. It has the advantages of fast measurement speed, high accuracy, and no envi...[Details]
Innovation Lab
京公网安备 11010802033920号
EEWORLD