-
(l) Classification by sensor structure l) Axial type (ordinary type) The impeller axis center coincides with the pipeline axis. It is TUF's leading product and has a full range of products (DN10 ...[Details]
-
The method for measuring the voltage value VZ of the Zener diode is as follows: 1. Single meter measurement method This method is applicable to pointer multimeters. If the voltage stabilizer di...[Details]
-
The device uses Silicon Labs IC with PLL for high-performance micro audio equipment at home. Due to the use of high-density packaging technology, its area is reduced by 40% compared to traditional MIT...[Details]
-
ATX-6000 Series High Voltage Wire Harness Tester The ATX-6000 series is a high-voltage harness test system, mainly for testing high-voltage harnesses of new energy vehicles. High-voltage cables are u...[Details]
-
Temperature instrument principle 1. Structure of thin film thermocouple 2. Solid expansion thermometer 3. Outline drawing of thermocouple compensation wire 4. Thermocouple Thermometer 5.S...[Details]
-
A CAN bus controller is designed using Verilog HDL. First, the entire CAN bus controller is divided into three modules: interface logic management, register logic, and CAN core module according t...[Details]
-
Understanding the development process of oscilloscopes is very useful for choosing the right oscilloscope.
1. Functions of Oscilloscope
An oscilloscope is a graphical display device that depict...[Details]
-
Duke Energy battery installation. Photo: Duke Energy.
Energy storage is not only being used to address the main challenge facing renewable energy sources such as wind and so...[Details]
-
Fundraising shrunk by 800 million yuan, the "speed of life and death" in the intelligent driving circle
Recently, there has been another big news in the field of intelligent driving: anoth...[Details]
-
For automobile manufacturers, only by continuously carrying out efficient production and reducing production costs can they remain invincible in the competition with others. They need to effectively...[Details]
-
According to the specific conditions of China's oil pipeline sites, a distributed pipeline leakage monitoring system based on embedded ARM-Linux and LabVIEW is designed, including remote measuremen...[Details]
-
Target The purpose of this experiment is to study the simple NPN emitter follower, sometimes called the common collector configuration. Material ADALM2000 Active Learning Mo...[Details]
-
Introduction: In "A Brief Analysis of the Impact of CLTC on New Energy Three-in-One Electric Drive Systems (Part I)", we compared and analyzed the characteristic data of NEDC/WLTP/CLTC cycle conditio...[Details]
-
With the development of 5G and AI technologies, autonomous driving is getting closer and closer to our lives. In the field of autonomous driving where car companies and technology companies are compe...[Details]
-
Common light sources in the general lighting market include incandescent lamps, compact fluorescent lamps (CFL), linear fluorescent lamps, high-intensity discharge lamps (HID) and emerging high...[Details]