Author: Yibo Technology Expressway self-media members Huang Gang and Sun Yiwen
The dusk was hazy, the moonlight was spreading over the clouds, and the high-rise buildings that rose from the ground loo...
The process from chip design to implementation can be roughly divided into front-end (logic design) and back-end (physical design). The front-end starts with the design architecture and ends with a ne...
RohdeSchwarz (hereinafter referred to as RS) sincerely invites you to participate in the "2019 RF Component Test Technology Seminar for 5G".Time and location of the meeting:October 14, Beijing
October...
What suitable domestic chips are recommended?
1. I have a 3.7V100mAh lithium battery. If I want to convert it into ±12V, what suitable domestic chips are recommended?2. I have a 12V100mAh lithium batt...
The transistor has three working states: cutoff, amplification, and saturation. The amplification state is very knowledgeable and complicated, and is mostly used in integrated chips, such as op amps, ...
[i=s] This post was last edited by Beifang on 2018-9-29 08:50[/i] 1. As mentioned in the previous article, if this NN model is to run, the preliminary preparation work is indeed quite large. The examp...