3M
™
Pin Strip Header
2 mm
×
2 mm Solder Tail Straight & Right Angle, Surfacemount Straight
1512 Series
• Industry standard compatible
• High temperature dielectric
• "No lead" wave and reflow solder
compatible
• Unique lengths available
• Maximizes use of PC board space
• Mates with boardmount and wiremount
products
• End stackable feature
• Side stackable feature
• Tape and reel packaging option available
• See Regulatory Information Appendix
for chemical compliance information
Date Modified: February 3, 2007
TS-0808-08
Sheet 1 of 4
Physical
Insulator
Material:
High Temperature Thermoplastic (PCT or LCP)
Flammability:
UL 94V-0
Color:
Black
Contact
Material:
Copper Alloy
Plating
Underplating:
100
µ″
[ 2.54
µm
] Nickel
Wiping Area:
30
µ″
[ 0.76
µm
] Gold
Solder Tails:
300
µ″
[ 7.6
µm
] Matte Tin or 200
µ″
Tin-Lead
Marking:
None
Electrical
Current Rating:
1.5 A
500 V
RMS
at Sea Level
Insulation Resistance:
> 1
×
10
9
Ω
at 250 V
DC
Withstanding Voltage:
Environmental
Temperature Rating:
-55°C to +105°C
Process Rating:
Maximum 260°C (per J-STD-020C)
Moisture Sensitivity Level:
1 (per J-STD-020C)
UL File No.: E68080
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
Pin Strip Header
2 mm
×
2 mm Solder Tail Straight & Right Angle, Surfacemount Straight
1512 Series
Contact
Dimension "C"
Quantity
04
06
08
10
12
C +.000
-.020
.155
[ 3.94 ]
.03
[ 0.8 ]
.0787 [ 2.00 ]
.0787
[ 2.00 ]
A
±
.008
.059
[ 1.50 ]
Tape & Reel
Suffix
n/a
WB
.139 [3.5]
.217 [5.5]
.295 [7.5]
.374 [9.5]
.453 [11.5]
.531 [13.5]
.611 [15.5]
.689 [17.5]
.768 [19.5]
.847 [21.5]
.925 [23.5]
1.005 [25.5]
1.083 [27.5]
1.162 [29.5]
1.240 [31.5]
1.320 [33.5]
1.398 [35.5]
1.477 [37.5]
1.556 [39.5]
1.634 [41.5]
1.714 [43.5]
1.792 [45.5]
1.870 [47.5]
1.970 [49.5]
2.028 [51.5]
2.107 [53.5]
2.185 [55.5]
2.264 [57.5]
2.344 [59.5]
14
16
18
20
22
24
26
28
30
32
34
36
.263
±
.02
[ 6.68 ]
WC
WD
38
40
42
.050
[ 1.27 ]
WE
.122 Typ
[ 3.10 ]
.030
[ 0.76 ]
44
46
48
50
WF
.310
[ 7.87 ]
R.040 [ 1.02 ]
4 Sides, Crown
R.0020
[ 0.05 ]
.0204
±
.0003
[ 0.518 ]
.0787
[ 2.00 ]
52
54
56
58
60
WG
Recommended PCB Pad Layout
.0244
±
.0005
[ 0.620 ]
Pin Cross Section
.0
in c h
Note: Tape and Reel not available on all sizes, please call.
In c h
[m m ]
T o le ra n ce U n le s s N o ted
.0 0
.0 00
± .1
± .0 1 ± .00 5
[ ] D im e n sio n s fo r R e fe re nce
O n ly
Ordering Information
1512XX-2X20-XX-XX
Contact Quantity
(See Table 1)
Pin Length Dim A
3 = .130″
4 = .152″
Packaging suffix:
Blank = Tray Packaging
WX = Tape & Reel Packaging
(see table)
TH = 15
µ
" [.38
µ
m] Gold with Tin-lead solder tails (App. E2 & C2 Apply)
TB = 30
µ
" [.76
µ
m] Gold with Tin-lead solder tails (App. E3 & C2 Apply)
Plating suffix:
RB = 30
µ
" [.76
µ
m] Gold with Matte Tin solder tails (App. E1 & C1 Apply)
TS-0808-08
Sheet 4 of 4
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/
EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/
EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon
information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/17/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision
2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in
writing, this information represents 3M’s best knowledge and belief based upon information provided by third party
suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
RIA-2217-A
RF/Wirelessly
京公网安备 11010802033920号
EEWORLD
