When considering wireless connectivity for Internet of Things (IoT) sensors, developers often think of Wi-Fi, Zigbee, or Bluetooth first. But the reality is that applications often require lower power...
A: I have a few questions to ask: 1. Can we just turn off the modules we don’t use in myimx6_defconfig? Do we need to modify other ones? 2. How to configure the second network port? 3. The rootfs is a...
Machine learning (ML) techniques are used to build devices with advanced capabilities and have been applied in many fields. These devices apply trained machine learning techniques to recognize certain...
In 1 second, 0.5 seconds on, 0.5 seconds off, the duty cycle is 50%, right? Then, in 1 millisecond, 0.5 milliseconds on, 0.5 milliseconds off, the duty cycle is also 50%, right? If it is 1 second, the...
Live Topic: C-V2X (Internet of Vehicles) Testing Challenges and Solutions
Live broadcast time: Wednesday, October 9, 15:00-17:00
Live broadcast content:
Wireless communication technology promises to m...
The calibrated on-chip RC oscillator provides a fixed 1.0, 2.0, 4.0, or 8.0 MHz clock. These frequencies are nominal at 5V, 25°C. This clock can also be used as the system clock by programming the CK...[Details]
Abstract: This paper introduces an intelligent automatic security system for university laboratories based on GSM and LPC2138. The system uses the high-performance ARM microprocessor LPC2138 as the...[Details]
Nidec Shinpo launches a lineup of servo motor reducers for food machinery
Nidec Shinpo has launched a product lineup for food machinery in the "VR series" of speed reducers for s...[Details]
When we use LED, we often encounter this kind of problem. When the LED is welded on the product, it works normally at the beginning, but after lighting for a period of time, it will appear dim ligh...[Details]
This article discusses the design and production of a 0-250V, 100mA regulated power supply. It can be used to repair tube audio equipment or other devices, test capacitors, and as a general experime...[Details]
The "push-back" of system verification is not just as simple as acceleration. EnCitius SVS provides a complete solution for system verification. In recent decades, the increasing complexity of chip...[Details]
Since the amount of data after the video signal is digitized is very large, based on the consideration of data flow rate and storage medium, for most users, the non-linear editing system using vide...[Details]
As vehicle networking gradually becomes an important development direction for future vehicles, the information security issues brought about by vehicle networking are becoming increasingly prominent...[Details]
The 2012 Portable Product Innovation Technology Exhibition, hosted by Shenzhen Creative Times and supported by the China Institute of Communications, will be held at the Shenzhen Convention and Exhibi...[Details]
If this file comes with IAR, no settings are required. If it is not built-in IAR, the easiest way is to put it in the same directory as the .c file, and no settings are required. If they are not in t...[Details]
Imagination’s automotive experience and virtualisation offerings set it apart from its competitors London, UK and Seoul, South Korea – 19 June 2019 – Imagination Technologies ’ PowerVR Series9XT...[Details]
Reference:
http://www.cublog.cn/u3/104447/showart_2218502.html
and the friendly mini2440 manual.
There is basically no problem if you follow the instructions. Here are just some points...[Details]
In recent years, backup power technology for coal mines has developed rapidly, and various types of batteries have been widely used. Among them, nickel-hydrogen batteries have been widely used in...[Details]
At present, there are mainly the following methods for designing microwave power amplifiers:
(1) Dynamic impedance measurement method. Under actual working conditions, use instruments to meas...[Details]