-
#include "stm32f10x.h" /*RCC clock configuration*/ void RCC_config(void) { ErrorStatus HSEStartUpStatus; /* RCC registers are set to default configuration */ RCC_DeInit(); /* Turn on externa...[Details]
-
System functions Connect 28 buttons to the 8 IOs of AVR and perform chain scanning. Once a button is pressed, an indication of the pressed button is given. hardware design For details about the I/O...[Details]
-
The TSI system (turbine status monitoring and protection system) and the ETS system (turbine emergency trip system) are important equipment for thermal power plants to ensure the normal operation of t...[Details]
-
The conflict between Russia and Ukraine has exacerbated energy tensions. The natural gas supply cuts caused by the conflict have further pushed up European natural gas prices, which in turn has cau...[Details]
-
1.1 Introduction
1.1.1 The role of the bootloader
The ultimate function of the bootloader is to start the kernel.
From the above, we can know the simplest steps of writing...[Details]
-
Recently, the SOFAR 3000TL and SOFAR 5000TLM photovoltaic grid-connected inverters independently developed and produced by SOFAR New Energy have successfully obtained the "Leader" certification iss...[Details]
-
Abstract: There are two methods to implement the phase shift method in reactive power measurement, one is based on sampling point shifting, and the other is to use the Hilbert filter. These two met...[Details]
-
According to foreign media reports, electric car manufacturers around the world have been grappling with the issue of battery consumption since the first mainstream electric car came out. French car ...[Details]
-
1 Introduction
Wireless sensor network is a wireless network composed of a large number of sensor nodes distributed in the monitoring area. Due to its rapid deployment, strong anti-destruction, h...[Details]
-
When selecting EMC test equipment, we often encounter the following questions: What is the difference between an EMI receiver and a spectrum analyzer? Why should we use a receiver for EMI testing...[Details]
-
;;c51 controls the left and right shift display of the two-color dot matrix.;;
;;;The program displays 6;;
ORG 0
AJMP MAIN
MAIN:
MOV 30H,#00H
MOV 31H,#00H
MOV 32H,#0FEH
MOV 33H,#9...[Details]
-
1 Introduction
Switching power supply
With significant advantages such as high efficiency, low power consumption, small size and light weight, it has become the mainstream product of...[Details]
-
Using STM32F030's SPI to drive TFT LCD, the LCD I use is a 2.4-inch color screen with 240*320 pixels, and the driver IC is ili9341. Only four wires are needed to light up the LCD. Here is the SPI con...[Details]
-
LG Display is currently transferring some OLED production equipment from the E5 production line of its Gumi plant in South Korea to its plant in Paju, possibly in preparation for the production of OL...[Details]
-
Automotive electronic circuits refer to circuits that combine electronic components such as semiconductor discrete devices, integrated circuits and microprocessors with automobiles to complete a ce...[Details]
Integrated technical exchanges
京公网安备 11010802033920号
EEWORLD