85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Potentiometer Specifications
Initial Electrical Characteristics
1
Conductive Plastic Element
Cermet Element
Standard Resistance Range
Linear Tapers (A, B, E, & H) ..................................................................(B & E) 1 K ohms to 1 megohm ............. (A & H) 100 ohms to 1 megohm
Audio Tapers (C, D, F, G, S, & T) .........................................................(D, G, S, & T) 1 K ohms to 1 megohm ... (C & F) 1 K ohms to 1 megohm
Total Resistance Tolerance .........................................................................±20 % or 10 % ...................................... ±10 % or 5 %
Absolute Minimum Resistance ...................................................................2 ohms maximum .................................. 2 ohms maximum
Operating Temperature Range ...................................................................-40 °C to +125 °C.................................. -40 °C to +125 °C
Storage Temperature Range ......................................................................-55 °C to +125 °C.................................. -55 °C to +125 °C
Temperature Coefficient Over Storage Temperature Range ......................±1,000 ppm/°C ...................................... ±150 ppm/°C
Vibration (Single Section) ...........................................................................15 G ....................................................... 15 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Shock (Single Section) ...............................................................................30 G ....................................................... 30 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Total Resistance Shift ...........................................................................±10 % maximum ................................... ±5 % maximum
Rotational Life (No Load) ............................................................................100,000 cycles ...................................... 100,000 cycles
Total Resistance Shift ...........................................................................(Linear taper) 10 ohms or ..................... (All tapers) ±5 % TRS maximum
Moisture Resistance (MIL-STD-202, Method 103, Condition B)
Total Resistance Shift ...........................................................................(B & E tapers) ±10 % maximum ........... ±5 % maximum (all tapers)
IP Rating .....................................................................................................IP 40 ...................................................... IP 40
Starting and Running Torque (Non-Locking Bushings)
Single Section ................................................................................................................................................................. 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Dual Section .................................................................................................................................................................... 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Triple Section ................................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Quadruple Section .......................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Starting and Running Torque (Locking Bushings) ..................................................................................................... 0.14 to 2.82 N-cm (0.2 to 4.0 oz.-in.)
Shaft Locking Torque with Locknut @ 10 in-lb. (B & E Bushings) ........................................................................................................ 14 N-cm (20 oz-in.)
Mounting ...................................................................................................................................................................1.7-2.0 N-m (15-18 lb.-in.) maximum
Weight (Single Section).............................................................................................................................................................................. 21 grams maximum
(Each Additional Section) ...................................................................................................................................................................... 6 grams maximum
Terminals .......................................................................................................................................................................... Printed circuit terminals or J-Hooks
Soldering Condition .................................................................. Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.
Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux.
Marking.......................................................................... Manufacturer’s trademark, wiring diagram, date code and resistance, manufacturer’s part number
Ganging (multiple section potentiometers) ..................................................................................................................................................... 4 cup maximum
Hardware ...........................................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.
For dimensional drawings see pages 3 & 4.
For ordering information see page 5.
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
*RoHS Directive 2002/95/EC Jan 27, 2003 including Annex.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
81/82 - 5/8 ” Square Single-Turn Panel Control
85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Rotary Switch Specifications
Initial Electrical Characteristics
1
Contacts:
DPST ...............................................................................................................................................................................N.O/N.O.,N.C./N.C. or N.O./N.C.
DPDT ................................................................................................................................................................................2 N.O./N.C. (break before make)
Power Rating (Resistive Load):
DPST ............................................................................................................ 2 A @ 125 volts RMS-60 Hz or 2 A @ 28 VDC, 1 A @ 250 volts RMS-60 Hz
DPDT ........................................................................................................................................................... 1 A @ 125 volts RMS-60 Hz or 1 A @ 28 VDC
Operating Temperature Range ...........................................................................................................................................................................0 °C to +70 °C
Storage Temperature Range ........................................................................................................................................................................ -65 °C to +125 °C
Vibration (Dual Section) ....................................................................................................................................................................................................... 8 G
(Triple Section) .................................................................................................................................................................................................... 5 G
(Quadruple Section) ........................................................................................................................................................................................... 3 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Shock (Dual Section) ......................................................................................................................................................................................................... 20 G
(Triple Section) ...................................................................................................................................................................................................... 15 G
(Quadruple Section) ............................................................................................................................................................................................. 10 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Rotational Life ..................................................................................................................................................................................................... 25,000 cycles
Switch Actuating Torque (50% Duty cycle @ Rated Power Load) .................................................................................. 1.41 to 4.94 N-cm (2 to 7 oz.-in.)
Contact Resistance ...................................................................................................................................................................... 100 milliohms maximum
Moisture Resistance (MIL-STD-202, Method 106, Condition B)
Contact Resistance (0.1 VDC-10 mA) ............................................................................................................................................ 10 milliohms maximum
Switch Housing Material ................................................................................................................. High temperature, flame retardant, thermosetting plastic
Mechanical Characteristics
1
Actuating Torque (Each Section, Switch Module Only) ....................................................................................................... 3.53 to 10.6 N-cm (5 to 15 oz.-in.)
Running Torque (Out of Detent, 2-4 Module Assembly)..................................................................................................... 0.21 to 1.41 N-cm (0.3 to 2 oz.-in.)
Detent ..................................................................................................................................................................................................... CW or CCW standard
Contact Materials ..........................................................................................................................................................................Fine silver with gold overlay
Terminal Styles .................................................................................................................................................................................................. Solder lug only
Standard Orientation ..............................................................................................................................................................In-line with control terminals
Optional .......................................................................................................................................................................... Rotated 90 ° CCW from standard
Terminal Strength (Before and After Soldering Heat Exposure) .......................................................................................................... 0.9 Kg (2 lbs.) minimum
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
Since the Hall effect was discovered more than 100 years ago, its application has gone through three stages:
The first stage is from the discovery of the Hall effect to the early 1940s. Initially, due...
Abstract: Remember before 2010, there were still big differences in the models of USB data cables of various mobile phone brands, so the data cables of different mobile phone manufacturers were not un...
The Battleship STM32 development board and four multimeters of the Atom on Time This content is originally created by firstain, a netizen of EEWORLD forum . If you need to reprint or use it for commer...
[i=s]This post was last edited by btty038 on 2019-10-30 15:44[/i]We all know that before GaN, we rarely used negative voltage in RF amplification or [base station amplification], but after GaN came, e...
The program of controlling the mpc014 motion control module through the 51 single-chip microcomputer, the complete circuit diagram and program engineering can be downloaded from the official website h...
This book discusses signal integrity and power integrity issues comprehensively. It mainly covers the overview of signal and power integrity analysis and physical design, the essential meaning of four...
Against the backdrop of the rapid development of the
smart home and
service robot
industries, home appliance giant Haier and humanoid
robot
startup Leju have reached a strategic part...[Details]
I have made countless Windows programs, but I have never thought of displaying Chinese characters and English letters as the same thing. This is no wonder. When writing window programs, SetWindowText...[Details]
According to Korean media Joongang, Samsung is developing a new generation of flagship Exynos chips, which are expected to use second-generation 3nm GAA wafer technology or be installed on the Galaxy...[Details]
The power supply system of cable TV is a centralized power supply of 60V AC. The power supply of CATV amplifier usually uses two types: power transformer step-down or isolated switching power supply....[Details]
How does EMI cause large DC deviations? It may be one of the following situations: According to the design, many instrumentation amplifiers can show excellent common-mode rejection performance in t...[Details]
On October 9, The Wall Street Journal published an exclusive interview with Qualcomm's new CEO Cristiano Amon, discussing Qualcomm's overall development strategy over the past six months. In the in...[Details]
In the logistics industry, trailer unloading is a repetitive and arduous task. In order to reduce human burden and improve efficiency, many companies have begun to develop automated unloading systems...[Details]
According to Kyodo News, the World Trade Organization (WTO) announced on the 16th that South Korea, which claims that Japan's enhanced export control measures on three semiconductor materials are ina...[Details]
Würth Elektronik expands REDCUBE product line with threaded SMT WP-SMRA Right-angle connectors for critical USB applications Waldenburg (Germany), April 11, 2022 - Würth Elektronik now offers a ...[Details]
What is Computer Aided Manufacturing (CAM)
The core of CAM (computer Aided Manufacturing) is computer numerical control (CNC for short), which is a process or system that applies computers to ...[Details]
I read the introduction of external interrupts online before and thought it was very simple. Now I think it was really impetuous to have such an idea. Don't be an impetuous embedded engineer, you must...[Details]
Qiongfa Gai Jiao Neng No. 922
The People's Governments of all cities, counties and autonomous counties, the Management Committee of Yangpu Development Zone, and all relevant provincial depart...[Details]
Advanced control timers (TIM1 and TIM8) Features of the TIM1 and TIM8 timers include: ● 16-bit up, down, up/down auto-load counter ● 16-bit programmable (can be modified in real time) prescaler, ...[Details]
If Volkswagen's battery business is listed independently, Guoxuan High-tech's position seems a bit awkward. On December 9, Volkswagen CEO Herbert Diess said that Volkswagen is preparing for the par...[Details]
0 Introduction
At present, atmospheric laser communication, wireless infrared communication and emerging ultraviolet communication technologies are developing rapidly and are a hot topic in mo...[Details]
Sensor
京公网安备 11010802033920号
EEWORLD
