VHA512ZP271R00DB datasheet, PDF

Datasheet> All Categories > Passive components> The resistor> VHA512ZP271R00DB

VHA512ZP271R00DB: DescriptionFixed Resistor, Metal Foil, 0.75W, 271ohm, 350V, 0.5% +/-Tol, -.2,.2ppm/Cel,; CategoryPassive components The resistor; File Size456KB，6 Pages; ManufacturerVishay; Websitehttp://www.vishay.com

Download Datasheet Parametric View All

VHA512ZP271R00DB Overview

Fixed Resistor, Metal Foil, 0.75W, 271ohm, 350V, 0.5% +/-Tol, -.2,.2ppm/Cel,

VHA512ZP271R00DB Parametric

Parameter Name	Attribute value
Is it Rohs certified?	incompatible
Objectid	852106979
Reach Compliance Code	compliant
Country Of Origin	Israel
ECCN code	EAR99
YTEOL	10
structure	Hermetically Sealed
JESD-609 code	e0
Lead diameter	0.645 mm
Lead length	25.4 mm
Number of terminals	2
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
Package diameter	12.7 mm
Package length	15.88 mm
Package form	Axial
method of packing	Bulk
Rated power dissipation(P)	0.75 W
resistance	271 Ω
Resistor type	FIXED RESISTOR
series	HZ(AXIAL)
technology	METAL FOIL
Temperature Coefficient	0.2 ppm/°C
Terminal surface	Tin/Lead (Sn/Pb)
Tolerance	0.5%
Operating Voltage	350 V

Preview

Download Datasheet

View All

HZ Series (Z-Foil) with Zero TCR

Vishay Foil Resistors

New Generation of Secondary Standards Hermetically Sealed Construction Ultra High

Precision Z-Foil Technology Resistors with TCR of ± 0.2 ppm/°C, Tolerance of ± 0.001 %

and Load Life Stability of ± 0.002 % (Metrology, Laboratory, Instrumentation, Industrial)

FEATURES



Temperature coefficient of resistance (TCR):

± 0.2 ppm/°C typical (- 55 °C to + 125 °C,

+ 25 °C ref.). For ultra high performances

(instrumentation and metrology) please refer to

the last page



Resistance range: 5



to 1.1 M (higher or lower values of

resistance available)



Foil resistors are not restricted to standard values; specific

“as required” values can be supplied at no extra cost or

delivery (e.g. 1K2345 vs. 1K)



Power coefficient “R due to self heating”:

5 ppm at rated power with the Z-Foil technology



Tolerance:

to ± 0.001 % (10 ppm)



Load life stability to ± 0.002 % (20 ppm) at 25 °C, 2000 h

at rated power



Load life stability, can be considerably improved

through in-house stabilization



Shelf life stability: 2 ppm for at least 6 years

(unaffected by humidity)



Electrostatic discharge (ESD) up to 25 000 V



Power rating: 0.3 W to 2.5 W at + 25 °C (depending on

model - see table 2)



Non-inductive, non-capacitive design



Non hot spot design



Rise time: 1 ns effectively no ringing



Current noise: 0.010 µV

RMS

/V of applied voltage (< - 40 dB)



Thermal EMF: 0.05 µV/°C typical



Voltage coefficient: < 0.1 ppm/V



Thermal stabilization time < 1 s (nominal value achieved

within 10 ppm of steady state value)



Non-inductive: < 0.08 µH



Terminal finish available: lead (Pb)-free or tin/lead alloy



Impervious to harmful environments - oil filled



Prototype quantities available in just 5 working days

or sooner. For more information, please contact

foil@vishaypg.com



For better performances (values, TCR, tolerance, stability),

please contact us

INTRODUCTION

The Z-Foil based oil filled, hermetically sealed HZ Series

resistors represent an industry breakthrough. The hermetic

sealing eliminates the ingress of moisture and oxygen, while

the oil acts as a thermal conductor, thus eliminating

long-term degradation elements of unsealed resistors, while

at the same time allowing the device to accept short periods

of overload without degradation.

The Z-Foil technology provides a significant reduction of the

resistive components, sensitivity to ambient temperature

variations (TCR) and applied power changes (PCR). When

combined with the hermetic sealing and oil filling, the

HZ Series resistors become

the most precise and stable

resistors available.

They are used as the most precise

secondary standards for ultra precision metrology.

With accuracies of ± 0.001 % (10 ppm) and a resistance

range from 5



to 1.1 M and long term shelf life of less than

2 ppm, these devices are virtually secondary standards that

can be carried in sets for daily or periodic calibration of

factory measurement equipment.

The HZ Series is available with laboratory and metrology

level precision and long-term stability with additional

in-house oriented processes such as: chip stabilization,

special TCR plotting, additional treatments for ultra

stability and special post manufacturing operations

(PMO). (Please refer to the last page)

TABLE 1 - TCR VS. RESISTANCE VALUE

RESISTANCE VALUE

()

TYPICAL TCR AND

MAX. SPREAD

(- 55 °C to + 125 °C, + 25 °C ref.)

(ppm/°C)

± 0.2 ± 2

± 0.2 ± 3

± 0.2 ± 4

FIGURE 1 - SHELF LIFE - VHA518-11

12K9 VS. QHE

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

- 0.1

100 200 300 400 500 600 700 800 900 1000

100 to < 1M1

50 to < 100

5 to < 50

Note

• For maximum TCR < 1 ppm/°C, see VHP100 and contact

application engineering

Resistance Change (ppm)

Time (Days)

Document Number: 63120

Revision: 25-Mar-10

For any questions, contact:

foil@vishaypg.com

www.foilresistors.com

Recommended Resources

Comparative analysis of inverter power supply or inverter

Simple DC voltmeter circuit schematic diagram

HST Hall sensor application interface circuit diagram

New micropower low dropout voltage regulator application circuit 06

Sawtooth wave proportional control circuit

Power failure storage protection

10 common basic knowledge of MCU: 1. If the MCU has a serial port peripheral, adding a level conversion chip, such as MAX232 or SP3485, will make it an RS232 or RS485 interface. 2. RS485 uses differential signal negative logic, +2~+6V...; Aguilera Microcontroller MCU

[RT-Thread reading notes] The simplest port to STM32F103CBT6: [i=s]This post was last edited by ddllxxrr on 2019-4-28 08:06[/i] The transplantation has been very annoying these days. I read the transplantation method in the book. I think it is very troublesome. ...; ddllxxrr Real-time operating system RTOS

I am 31 years old, I have been coding for 10 years, and I will retire tomorrow!: This article comes from WeChat public account: LinkedInWilliam Bengen, a scholar at the Massachusetts Institute of Technology, once proposed the famous 4% rule: As long as the principal you withdraw f...; eric_wang Talking about work

Evaluation of domestic single-chip networking chips: Domestic chips are getting more and more attention now, and more and more products are starting to replace them with domestic chips. We must strongly support this. Recently, we are looking for a suita...; 孟斌 Domestic Chip Exchange

[Jihai APM32E103VET6S MINI Development Board Review] Second post PLL and system clock questions: After a quick look at the Polaris data sheet, I have some questions about the PLL clock and system clock.Simply speaking, the maximum output clock of PLL should be 96MHZThe maximum system clock is 120...; 常见泽1 Domestic Chip Exchange

Ink screen calendar based on AB32 and RT-Thread, open source: Project Background This project is one of the participating projects in the [RT-Thread x RISC-V Application Innovation Competition] Project Introduction What problem does this project solve?Traditiona...; Fillmore Real-time operating system RTOS

Shortcut: 00 01 02 03 04 05 06 07 08 09 0A 0C 0F 0J 0L 0M 0R 0S 0T 0Z 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 1H 1K 1M 1N 1P 1S 1T 1V 1X 1Z 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 2G 2K 2M 2N 2P 2Q 2R 2S 2T 2W 2Z 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F 3G 3H 3J 3K 3L 3M 3N 3P 3R 3S 3T 3V 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4M 4N 4P 4S 4T 50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5E 5G 5H 5K 5M 5N 5P 5S 5T 5V 60 61 62 63 64 65 66 67 68 69 6A 6C 6E 6F 6M 6N 6P 6R 6S 6T 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7M 7N 7P 7Q 7V 7W 7X 80 81 82 83 84 85 86 87 88 89 8A 8D 8E 8L 8N 8P 8S 8T 8W 8Y 8Z 90 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D 9F 9G 9H 9L 9S 9T 9W

Popular Components