I have been studying STM32 timer synchronization these days.
In the official ST routines, there are several examples of timer synchronization.
One of them is to use an external trigger to start a time...
The TI Vision SDK based on TI SYS/BIOS RTOS can run multiple algorithms in parallel on a wide range of heterogeneous cores and integrate new features into the system more easily. In addition, the rich...
1.TTL level: output high level2.4V, output low level0.4V. At room temperature, the general output high level is 3.5V, and the output low level is 0.2V. Minimum input high level and low level: input hi...
[i=s]This post was last edited by caxfan on 2022-11-5 20:28[/i]#3D Printer Controller ProjectcaxfanIntroduction
A project based on the open source 3D printer system Smoothieware V2.0 ported to STM32F7...
I generated the interrupt code for UART1 using STM32CubeMX.The interrupt code is generated in the file stm32f0xx_it.c. To verify whether an interrupt occurs, I use the uart_irq variable to indicate th...
//The program implements the A/D conversion function, and A/D uses interrupt mode. The program inputs a DC voltage through the RA2 analog channel of the p18f458 microcontroller . // When the DC ...[Details]
A global chip shortage is pushing up prices on products such as laptops and printers and threatens to have the same impact on other best-selling devices including smartphones, according to the Wall S...[Details]
This article introduces a high-performance, low-cost home VA combination, which is very suitable for audiophiles to make their own. It will make the listening experience in the living room (about 10 ...[Details]
The rise of mobile healthcare will drive the expansion of Bluetooth 4.0 and Near Field Communication (NFC) applications. To realize mobile healthcare applications, portable medical device manufacture...[Details]
The autonomous driving industry is ushering in policy promotion, which will accelerate the commercialization process of L3/L4 In the second half of 2023, China introduced a number of policies relat...[Details]
USB provides a means for multiple portable devices to be charged from a single "universal" power source, making it more convenient. But there are many challenges in this regard. Previously, USB cha...[Details]
In order for an amplifier composed of transistors to amplify the signal voltage without distortion, it is necessary to ensure that the emitter junction of the transistor is forward biased and the c...[Details]
As the global energy crisis continues, energy conservation has become a long-term strategy for economic development in countries around the world. In addition to saving energy, energy conservation ...[Details]
introduction
Conversion efficiency has prompted FPGA system designers to move from linear regulators to switch-mode DC-DC converters. Although switch-mode DC-DC converters can significantly improve...[Details]
Under the current automobile development system, cars have become smart terminals similar to mobile phones. Traditional feature phones and the automotive electronics industry can no longer meet con...[Details]
The advent of low temperature co-fired ceramic (LTCC) materials has greatly promoted the miniaturization of high-performance devices. This technology is also the basis of Mini-Circuits' latest ...[Details]
NVIDIA continues to enrich its product line in an orderly manner. It is reported that on October 29, the GTX 1660 Super will be released and listed. Compared with the GTX 1660, the biggest change is ...[Details]
JTAG/ICE Port Pins
In any ARM processor with IEEE1149 standard JTAG/ICE port, TDI, TDO, TMS and TCK are the minimum pins. All the pins except TDO pin have internal pull-up resistors of about 10KR....[Details]
describe:
The LTC®2911
is
a low power, high accuracy, triple channel supply monitor with a power-fail comparator. The reset timeout can be selected with an external capacitor or se...[Details]
stm32/stm8
京公网安备 11010802033920号
EEWORLD
