• Extremely low wavelength dependent loss (WDL) and PDL
• Up to 10-channel arrays
Applications
• EDFA
• Raman amplifiers
• Add/Drop monitoring
• DWDM systems
JDSU miniature integrated power monitors are designed for channel monitoring
in dense wavelength division multiplexing (DWDM) systems and Add/Drop
modules. They can also be used for signal/pump power monitoring in erbium
doped fiber amplifiers (EDFAs) and Raman amplifiers where integrated solutions
tend to replace traditional fused fiber tap + photodiodes. The miniaturized
version is a high performance active hybrid device that incorporates a micro-optic
tap coupler and high-sensitivity InGaAs photodiode in a miniature package. It
offers high reliability, compact footprint with ultra-wide bandwidth, and very low
polarization dependent loss (PDL).
NORTH AMERICA
:
800 498-JDSU (5378)
WORLDWIDE
:
+800 5378-JDSU
WEBSITE
:
www.jdsu.com
MINIATURE INTEGRATED POWER MONITOR
2
IPM Single Unit Diagram
(Specifications in mm unless otherwise noted.)
20.1 MAX
18.35
7.0 MAX
Ø 3.20
0.50 X 0.50
Ø 0.50
PITCH 2.54
IPM Array (6 to 8 channels) Diagram
(Specifications in mm unless otherwise noted.)
32.00
3.20
PITCH 2.54 X 11
=27.94
3.0
Ø 0.51
Ø 1.14
PIN 1
27.94
32.50
22.86
6.00
IPM Array Pinout
(8 channel only)
BOTTOM VIEW
Pin
1
2
3
4
5
6
7
8
9
10
11
12
Description
Anode (Common)
Cathode 1
Cathode 2
Anode (Common)
Cathode 3
Cathode 4
Cathode 5
Anode (Common)
Cathode 6
Cathode 7
Anode (Common)
Cathode 8
MINIATURE INTEGRATED POWER MONITOR
3
Specifications
Parameter
Wavelength range
C-Band
L-Band
C+L Band
Insertion loss (input to output)
Wavelength flatness (input to output)
Polarization dependent loss (input to output)
PMD (input to output)
Optical return loss
PD operating bias voltage, V
R
PD responsivity
PD linearity
PD dark current
PD cut-off frequency
Input optical power
Operating temperature
Storage temperature
Tensile load
Package dimensions
Single unit
6 to 8 channels array
10 channels array
Fiber type
Pigtail color code
Specification
Maximum
Maximum
Maximum
Maximum
Minimum
Minimum
Maximum
Maximum
Maximum
1510-1580 nm
1560-1625 nm
1510-1625 nm
See table below
0.002 dB/nm
0.03 dB
0.1 ps
45 dB
-5 V (typical)
0.8 A/W (for net responsivity, see table below)
±10%
1 nA @ V
R
= -5 V and 23 °C
600 MHz @ V
R
= -5 V and R
L
= 50 W
See table below
-20 to 75 °C
-40 to 85 °C
5N
3.2 mm x 18.5 mm
32 mm x 32.5 mm x 6 mm
38.8 mm x 32.5 mm x 6 mm
SMF-28, 250 µm primary coating
Black (input port); Clear (output port)
Note: Parameters are specified for the signal wavelength range, all polarization states, and operating temperature range without connector unless otherwise stated.
Tap Ratio and Insertion Loss Table
Code
Tap Ratio
Maximum Insertion Loss
(Input to Output)
0.5 dB
0.5 dB
0.5 dB
0.5 dB
0.6 dB
0.8 dB
Minimum Net Responsivity
1
Maximum Optical Power
2
1
2
3
4
5
T
1%
2%
3%
4%
5%
10%
0.008 A/W
0.016 A/W
0.024 A/W
0.032 A/W
0.040 A/W
0.080 A/W
500 mW
250 mW
150 mW
125 mW
100 mW
50 mW
1. The net responsivity is defined as the ratio of the PD current output and optical power measured at output fiber.
2. The maximum optical power is the maximum value of the power at input port within the PD linearity range specified.
MINIATURE INTEGRATED POWER MONITOR
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or
JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at
customer.service@jdsu.com.
Sample: IPM-C82310010
IPM-
Code
C
L
1
Wavelength
C-band
L-band
C + L bands
Code
1
2
3
4
5
T
Tap Ratio
1%
2%
3%
4%
5%
10%
Code
2
3
4
Package Size
Single
unit
6-8
channel
array
10-channel array
001
Code
0
1
2
3
4
5
8
9
A
B
C
Connector Type
No
connector
FC/PC
FC/SPC
FC/APC
SC/SPC
SC/APC
ST
FC/UPC
SC/UPC
LC/SPC
LC/UPC
Code
1
6
7
8
T
Channels
Single
device
6-channel array
7-channel array
8-channel array
10-channel array
Code
1
2
4
5
Fiber Length
1m
2m
0.5 m
1.5 m
SMF-28 is a registered trademark of Corning Incorporated.
ST is a registered trademark of Lucent Technologies.
All statements, technical information and recommendations related to the products herein are based upon information believed to be
reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any
inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves
the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, includ-
ing withdrawal at any time of a product offered for sale herein. JDSU makes no representations that the products
herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are
As countries continue to raise their requirements for automobile fuel consumption and emission standards, the 48V mild hybrid system (Mild Hybrid) has gradually come into people's view. Simply put, th...
The application of buck-boost charger can range from notebooks to portable speakers, from smartphones to gateway backup, etc. So in this topic, the buck-boost charger architecture will introduce how t...
The capacitive-contactless liquid level sensor is a sensor that indicates the liquid level status with high and low level outputs, that is, it can be used as a liquid level switch.
The application cir...
Contents 0 Introduction 1 Microwave heating principle and microwave power application equipment 2 Current status of microwave power application in China 3 Microwave power application is moving towards...
AT32WB415 is a microcontroller that uses low-power (BLE) Bluetooth 5.0 and is equipped with corresponding debugging and downloading tools on the board. However, its peripheral configuration is relativ...
Sina Digital News on the morning of April 23, foreign media 9to5Mac made predictions about the upcoming WWDC Apple Global Developers Conference in June based on some internal information. Acc...[Details]
Friends who produce LEDs all know that: due to the extremely high requirements for solid crystal during the packaging of single-electrode chips, the use of conductive glue and conductive silver glu...[Details]
"If we can't get HiSilicon's products, the company's operations will be paralyzed, and we will lose at least 6 million this month. Of course, we are definitely not the only one to suffer." In a wo...[Details]
Mobileye starts autonomous car testing in Germany
Mobileye has successfully obtained an autonomous driving test permit from TÜV SÜD, allowing it to operate NIO ES8 electric vehicles ...[Details]
Xiaomi has received good news one after another since 2018. On January 6, the first Xiaomi authorized store in Vietnam opened in Ho Chi Minh City; on January 9, Xiaomi and Oculus jointly launched a...[Details]
1 Introduction
The main drive of the vertical roller mill of the 1580 hot-rolled strip steel plant of Nippon Steel adopts the upper drive type. The main motors located on both sides of the center l...[Details]
Pulsars are "dead" stars that rotate very fast and emit powerful and regular electromagnetic pulse signals from the direction of the magnetic poles. The pulse signals emitted by different pulsars hav...[Details]
Recently, Vishay Intertechnology, Inc. announced the launch of two new automotive-grade IHTH high-current, high-temperature plug-in inductors in a small 1500-inch form factor --- IHTH-1500MZ-5A and...[Details]
0 Introduction
The United States began to conduct aerial positioning research in the 1960s. In 1974, the global positioning system based on the GPS concept began to be officially developed. It ...[Details]
Excessive power consumption has become a major obstacle to further scaling of semiconductor process dimensions and a serious threat to all progress in all areas of electronics - from driving smalle...[Details]
Taiwan-based Sino-Metric Solar Technology Co., Ltd. has signed a memorandum of cooperation with China's Huawei to cooperate in the field of solar photovoltaic inverters. Sino-Metric Solar Technolog...[Details]
1. Digital TV
Digital TV is developing rapidly all over the world, and my country has also accelerated the broadcasting process. According to the requirements of the Ministry of Radio, Film a...[Details]
0 Introduction
Wind energy is the fastest growing clean energy among renewable energy sources, and it is also the renewable energy with the most promising prospects for large-scale development ...[Details]
On July 15, the Chongqing Yongchuan Songgai Energy Storage Power Station project completed reverse power transmission. So far, the two energy storage power station projects invested and constructed...[Details]
Infineon is the first company to master the handling and processing of ultra-thin 20μm power semiconductor wafers
Cutting substrate resistance in half by reducing wafer thickness re...[Details]
TI Technology Forum
京公网安备 11010802033920号
EEWORLD
