Features
n
RoHS compliant*
n
Conductive plastic or cermet
n
Linear and audio tapers
n
PC board and bushing mount
n
Gangable
n
Metal bushing and shaft
n
Sealed for board washing
51/53 – Sealed 1/2 ˝ (12.5 mm) Square Control
Standard Resistance Range
Linear ........................................................................................................... 1 K ohms to 1 megohm .............................. 150 ohms to 1 megohm
Audio ............................................................................................................ 1 K ohms to 1 megohm .............................. 1 K ohms to 1 megohm
Total Resistance Tolerance
Linear Tapers ............................................................................................... ±10 % or ±20 %.......................................... ±10 % or ±5 %
Audio Tapers ................................................................................................ ±10 % or ±20 %.......................................... ±10 %
Independent Linearity ......................................................................................... ±5 % ........................................................... ±5 %
Absolute Minimum Resistance ........................................................................... 2 ohms maximum ....................................... 2 ohms maximum
Effective Electrical Angle .................................................................................... 270 ° ±5 ° ................................................... 270 ° ±5 °
Contact Resistance Variation ............................................................................. 2 % ............................................................. 2 %
Dielectric Withstanding Voltage (MIL-STD-202 – Method 301)
Sea Level ..................................................................................................... 1,500 VAC minimum .................................. 1,500 VAC minimum
70,000 .......................................................................................................... 500 VAC minimum ..................................... 500 VAC minimum
Insulation Resistance ......................................................................................... 1,000 megohms minimum .......................... 1,000 megohms minimum
Power Rating At 70 °C (Derate To 0 At 125 °C)
(Voltage Limited By Power Dissipation or 350 VAC, Whichever Is Less)
Linear Tapers ............................................................................................... 0.5 watt....................................................... 1.0 watt
Audio Tapers ................................................................................................ 0.25 watt..................................................... 0.5 watt
Theoretical Resolution ........................................................................................ Essentially infinite....................................... Essentially infinite
Electrical Characteristics
1
Conductive Plastic
Cermet
Operating Temperature Range ........................................................................... +1 °C to +125 °C ........................................ +1 °C to +125 °C
Storage Temperature Range .............................................................................. -55 °C to +125 °C ....................................... -55 °C to +125 °C
Temperature Coefficient Over Storage Temperature Range .............................. ±1,000 ppm/°C ........................................... ±150 ppm/°C
Vibration (Single Section) ................................................................................... 15 G ........................................................... 15 G
Total Resistance Shift .................................................................................. ±2 % maximum .......................................... ±2 % maximum
Voltage Ratio Shift ....................................................................................... ±5 % maximum .......................................... ±5 % maximum
Shock (Single Section) ....................................................................................... 30 G ........................................................... 30 G
Total Resistance Shift .................................................................................. +2 % maximum .......................................... ±2 % maximum
Voltage Ratio Shift ....................................................................................... ±5 % maximum .......................................... ±5 % maximum
Load Life ............................................................................................................. 1,000 hours ................................................ 1,000 hours
Total Resistance Shift .................................................................................. ±10 % TRS maximum ................................ ±5 % TRS maximum
Rotational Life (No Load).................................................................................... 50,000 cycles ............................................. 25,000 cycles
Total Resistance Shift .................................................................................. ±10 % TRS maximum ................................ ±10 % TRS maximum
Contact Resistance Variation @ 25,000 Cycles .......................................... ±2 % ........................................................... ±4 %
Moisture Resistance (MIL-STD-202, Method 103, Condition B)
Total Resistance Shift .................................................................................. ±10 % TRS ................................................. ±5 % TRS
IP Rating
Entire Unit .................................................................................................... IP64 ............................................................ IP64
Shaft/Bushing .............................................................................................. IP65 ............................................................ IP65
Stop Strength................................................................................................................................................................................................................56 N-cm (5 lb.-in.)
Mechanical Angle ......................................................................................................................................................................................................................290 ° ±5 °
Torque
Starting (Dual Sections) ............................................................................................................................................................. +0.35 N-cm (+0.5 oz.-in.) maximum
Running (Single Section) ............................................................................................................................................................0.15 to 1.4 N-cm (0.2 to 2.0 oz.-in.)
Running (Dual Section) ...............................................................................................................................................................0.35 to 1.8 N-cm (0.5 to 2.5 oz.-in.)
Detent (Single Section) ................................................................................................................................................................. 1.94 N-cm (2.75 oz.-in.) minimum
Mounting (Torque on Bushing).......................................................................................................................................... 1.7 to 2.0 N-m (15 to 18 lb.-in.) maximum
Weight (Single Section) .............................................................................................................................................................................................................5.5 grams
(Additional Section) .............................................................................................................................................................................................................3.0 grams
Terminals ................................................................................................................................................................................................................... PC pin or solder lug
Soldering Condition .................................................................................. Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ˝ wire diameter.
Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux.
Part can be wave soldered at 260 °C (500 °F) for 5 seconds, no wash process with no clean flux.
Marking ............................................................................................................................................................... Manufacturer’s trademark, part number and date code
Ganging (Multiple Section Potentiometer) ............................................................................................................................................................. 2 sections maximum**
Hardware .............................................................................One lockwasher and one mounting nut is shipped with each potentiometer (Bushing A: H-37-2 & H-38-2;
Bushing C: H-37-1 & H-38-1; Bushing R: H-37-4 & H-38-9; Bushing S: H-37-1 & H-38-14; Bushing U: H-37-3 & H-38-8)
1Electrical specifications tested at 200 RPM, at room ambient: +25 °C nominal.
** Additional sections available on special request with higher minimum order quantities.
Environmental Characteristics
1
Mechanical Characteristics
WARNING
Cancer and Reproductive Harm
www.P65Warnings.ca.gov
*RoHS Directive 2015/863, Mar 31, 2015 and Annex.
Specifications are subject to change without notice. Users should verify actual device performance in their specific
applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the
last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns
®
products manufactured by or on behalf of Bourns, Inc. and
Unless otherwise expressly indicated in writing, Bourns
®
products and data sheets relating thereto are subject to change
and complete before placing orders for Bourns
®
products.
The characteristics and parameters of a Bourns
®
product set forth in its data sheet are based on laboratory conditions, and
statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical
requirements in generic applications. The characteristics and parameters of a Bourns
®
®
product with other components
the actual performance of the Bourns
®
®
®
product as meeting the requirements of a particular industry
®
of Bourns products are responsible for ensuring compliance with safety-related requirements and standards applicable to
®
Bourns
®
on a case-by-case basis, use of any Bourns
®
®
®
®
®
Bourns
®
®
standard products that are suitable for use in aircraft
®
standard
the user’s sole risk.
®
and the user for which such Bourns
®
®
custom products shall be negotiated on a case-by-case basis by Bourns
®
also apply to such Bourns custom products.
Users shall not sell, transfer, export or re-export any Bourns
®
Bourns
®
standard products shall
products and Bourns technology and technical data may not under any circumstance be
exported or re-exported to countries subject to international sanctions or embargoes. Bourns
®
products may not, without
®
bilingual versions are available at:
Web Page:
http://www.bourns.com/legal/disclaimers-terms-and-policies
PDF:
http://www.bourns.com/docs/Legal/disclaimer.pdf
京公网安备 11010802033920号
EEWORLD
