CCF02 (CCF-2)
www.vishay.com
Vishay Dale
Metal Film Resistors, Industrial Power, Flameproof
FEATURES
• Small size suitable for 1/2 W, 1 W and 2 W
applications
• High power rating, small size
• Flameproof, high temperature coating meets
EIA RS-325-A
• Excellent high frequency characteristics
• Low noise
• Low voltage coefficient
• Tape and reel packaging for automatic
insertion (52.4 mm inside tape spacing per
EIA-296-E)
• Material categorization: For definitions of
compliance please see
www.vishay.com/doc?99912
Note
*
Lead (Pb)-containing terminations are not RoHS-compliant.
Exemptions may apply.
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL
CCF02
(1)
HISTORICAL
MODEL
CCF-2
POWER
RATING
P
70 °C
W
2.0
MAXIMUM
WORKING
VOLTAGE
(1)
V
350
TEMPERATURE
COEFFICIENT
± ppm/°C
100
TOLERANCE
±%
1, 5
RESISTANCE
RANGE
4.99 to 1M
E-SERIES
96 for 1 % tolerance
24 for 5 % tolerance
Note
Continuous working voltage shall be
P
x
R
or maximum working voltage, whichever is less.
TECHNICAL SPECIFICATIONS
PARAMETER
Rated Dissipation at 70 °C
Maximum Working Voltage
Insulation Voltage (1 Min)
Dielectric Strength
Insulation Resistance
Operating Temperature Range
Terminal Strength (Pull Test)
Failure Rate
Weight (Max.)
UNIT
W
V
V
eff
V
AC
°C
lb
10
-9
/h
g
CCF02
2.0
350
> 500
900
10
11
- 65/+ 230
2
<1
0.35
MATERIAL SPECIFICATIONS
Element
Solderability
Core
Termination
Proprietary nickel-chrome film
Satisfactory per MIL-STD-202, Method 208.
Fire-cleaned high purity ceramic
Standard lead material is solder-coated
copper. Solderable and weldable per
MIL-STD-1276, Type C.
MARKING
Color code marking with 5 color bands for ± 1 % product and
4 color bands for ± 5 % product
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: CCF02301RFKR36 (preferred part numbering format)
C
GLOBAL MODEL
C
F
0
2
3
0
1
R
F
K
R
3
6
PACKAGING
SPECIAL
Blank = Standard
(Dash Number)
(up to 3 digits)
From
1 to 999
as applicable
RESISTANCE VALUE
R
=
Ω
K
= kΩ
M
= MΩ
4R99
= 4.99
Ω
680K
= 680 kΩ
1M00
= 1.0 M
Ω
CCF02
TOLERANCE
CODE
F
=±1%
J
=±5%
TEMPERATURE
COEFFICIENT
K
= 100 ppm
E36
= Lead (Pb)-free,
T/R (2500 pieces)
R36
= Tin/Lead,
T/R (2500 pieces)
Historical Part Number example: CCF-23010F (will continue to be accepted)
CCF-2
HISTORICAL MODEL
3010
RESISTANCE VALUE
F
TOLERANCE CODE
R36
PACKAGING
Note
• For additional information on packaging, refer to the Through-Hole Resistor Packaging document (www.vishay.com/doc?31544).
Revision: 15-Nov-12
Document Number: 31012
1
For technical questions, contact:
ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
CCF02 (CCF-2)
www.vishay.com
Vishay Dale
DIMENSIONS
in inches (millimeters)
1.030 ± 0.130
(26.16 ± 3.30)
0.344 ± 0.031
(8.74 ± 0.79)
0.032 ± 0.002
(0.81 ± 0.05)
0.425
(10.80)
Max.
0.145 ± 0.015
(3.68 ± 0.38)
RATED POWER IN %
120
100
80
60
40
20
0
- 65 - 50 - 25
HEAT RISE (°C ABOVE AMBIENT)
Surface temperatures
were taken with an
infrared pyrometer
in + 25 °C still air.
Resistors were
supported by their
leads in test clips at a
point 0.5" (12.70 mm)
out from the resistor
body ends.
250
200
150
100
50
0
1
2
3
4
5
APPLIED POWER (W)
0
25
50
75
70
100 125 150
175 200 225 250
AMBIENT TEMPERATURE IN °C
DERATING
THERMAL RESISTANCE
PERFORMANCE
TEST
Thermal Shock
Short Time Overload
Low Temperature Operation
Moisture Resistance
Resistance to Soldering Heat
Shock
Vibration
Terminal Strength
Dielectric Withstanding Voltage
Life
MAX.
R
(TYPICAL TEST LOTS)
± 1.0 %
± 0.5 %
± 0.5 %
± 1.5 %
± 0.5 %
± 0.5 %
± 0.5 %
± 0.5 %
± 0.5 %
± 2.0 %
Revision: 15-Nov-12
Document Number: 31012
2
For technical questions, contact:
ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000
京公网安备 11010802033920号
EEWORLD
