Specifications are limited by the circuit and resistance value.
Please contact us separately.
3 digits
●
Resistor Networks：RNX, RTX, RTY
RNX
Circuit
Code
RNX: Custom Resistor Network
RTX,RTY: SOT-23 Resistor network
●
Resistor Networks：RDA, RDB
RDA
Circuit
Code
RDA: Dual terminator network
RDB: Differential terminator network
Example
Q20
Package
Symbol
Package type symbol＋
Number of pins
Example
T
Terminal
Surface Material
T :Sn
TE
Taping
TE: Plastic
embossed
5001
Custom
Code
Q20
Package
Symbol
Same as above
(Except Q24, N14, N08)
T
Terminal
Surface Material
T:Sn
TE
Taping
TE: Plastic
embossed
471J
Nominal Resistance
& Tolerance of R1
3 digits G: ±2%
J : ±5%
511J
H
Contact us when you have control request for environmental hazardous material other than the substance specified by EU-RoHS.
Nominal Resistance
T.C.R.
& Tolerance of R2 （×10
−6
/K）
3 digits G: ±2%
E :±25
J : ±5%
C:±50
H:±100
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment.
Malfunction or failure of the products in such applications may cause loss of human life or serious damage.
Oct. 2020
www.koaglobal.com
■Ratings
Package
Package Symbol
Package Power Rating
Resistance Range
Max. Working Voltage
Rated Voltage
Rated Ambient Temp.
Operating Temp. Range
10Ω〜1kΩ
1.1kΩ〜
Q16
0.8W
QSOP
Q20
1.0W
Q24
1.0W
N08
0.4W
SOIC
N14
0.6W
N16
0.8W
SOT-23
S03
0.2W
Power Rating 200mW/Resistor Element
※1
Power Rating 50mW/Resistor Element
※1
100V
√￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣
Rated Power×Nominal Resistance Value, Rated Voltage should not exceed Max. Working Voltage.
＋70℃
−55℃〜＋125℃
※2
Above ratings are based on the thermal resistances using a multi-layer circuit board (EIA/JESD51). For mounting on a mono-layer board, power derating shall be needed. Please inquire of us about
conditions.
※1 Total power consumption of all elements should not exceed the package power rating.
※2 About operating temperature range −55℃〜＋155℃, We can provide as custom devices. Please inquire of us about it.
●Standard Resistor Networks
Circuit
Code
Circuit Schematics
（Top View）
Pin n
Number
of Pins
T.C.R.
（×10
−6
/K）
E:±25
C:±50
H:±100
Resistance Range
（Ω）
E24
and Absolute Tolerance
F:±1%
G:±2%, J:±5%
100〜100k 100〜100k
51〜100k
30〜100k
n/2
51〜100k
10〜100k
Circuit
Code
Circuit Schematics
（Top View）
Pin n
R1
Number
of Pins
T.C.R.
（×10
−6
/K）
E:±25
Resistance Range(Ω) (E24)
and Resistance Tolerance
G:±2%, J :±5%
Network Resistors
Pin n
RBA
R
8, 14, 16
R
20, 24
n/2
Number of Pins : n=8,16,20,24
RDA
R2
-
R1
R2
-
16, 20
C:±50
H:±100
Pin n
R1
Pin 1
Pin n
R
Pin n
Pin 1
Pin 1
n/2
R1=
150〜10k
R1: R2=
1:1〜1: 4
Pin n
Pin
:
Number of Pins
n
n=8,16,20,24
E:±25
n
100〜100k
Pin
100〜100k
R
Pin n
R1
R2
E:±25
C:±50
H:±100
RBB
R
Pin 1
n/2
Pin
8, 14, 16
20, 24
C
R
n
C:±50
R1
R
R2
R1
Pin 1
51〜100k
30〜100k
n/2
51〜100k
10〜100k
100〜40k
2R
n/2
RDB
Pin 1
R1
Pin 1
n/2
16, 20
R2
R1
Pin
Number
1
Pins
R
2
1
n/2
: n=8,16,20,24
R
of
H:±100
E:±25
C:±50
Pin 1
R1=
150〜10k
R1: R2=
1:1〜1: 4
Pin 1
Number of Pins : n=3,SOT-23 Only
Pin 1
100〜40k
Pin n
R
R
Pin n
RTX
n/2
Pin n
R
1
R
2
R
2R
2R
R
R
2
3
SOT-23
Only
2R
2R
Number of Pins : n=8,16,20,24
RLA
R
2R
2R
R
2R
2R
n/2
14, 16
H:±100
1k〜30k
H:±100
2R
51〜40k
2R
51〜40k
2R
Pin 1
Pin 1
n/2
ber of Pins : n=8,16,20
Number of Pins : n=3,SOT-23 Only
Pin 1
n/2
■Performance
Test Items
Resistance
T.C.R.
Resistance to soldering heat
Rapid change of temperature
Moisture resistance
Endurance at 70℃
High temperature exposure
Performance Requirements
ΔR±
（％＋0.05Ω）
Limit
Typical
25℃
＋25℃/−55℃, ＋25℃/125℃
260℃±5℃, 10s±1s
−55℃
（30min.）
/＋125℃
（30min.）, 100 cycles
40℃±2℃, 90〜95%RH, 1000h
1.5h ON/0.5 h OFF cycle
70℃±2℃, 1000 h
1.5 h ON/0.5 h OFF cycle
＋125℃, 1000 h
Within specified tolerance
Within specified T.C.R.
0.1
※3
0.5
※3
Test Methods
0.05
0.05
0.05
0.05
0.10
0.5
※3
0.25
※3
0.25
※3
※3 Guaranteed value differs depending on resistance value.
■Precautions for Use
・
he resistor of this product is formed by narrow patterning a thin metal film. Thus, application of excessive voltage causes burn and destruction of the resistive
T
film, abnormality in resistance or open resistance and loss of proper function. The properly and electrostatically measured taping materials are used for the
components, but attention should be paid to the fact that there is some danger the parts may be destructed by static electricity(equivalent to 500V and more at
100pF, 1.5kΩ) to cause a change in resistance in the conditions of an excessive dryness when mounting on the boards. Similarly, care should be given not to apply
the excessive static electricity at the time of mounting on the boards. When designing, consideration can be taken into withstanding ESD for customized KPC
products. Please consult with us about the details.
・Hand
soldering by iron soldering or repairment are not recommended because KPC is a multi-pin product.
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment.
Malfunction or failure of the products in such applications may cause loss of human life or serious damage.
Oct. 2020
www.koaglobal.com
NETWORKS
EU
RoHS
KPC RIA
KPC RNX
Isolated Resistor Networks
Custom Resistor Networks
■Applications
・
utomotives, medical instrument, industrial machines, Measurement equipment
A
・
omputers and networks
C
・
igh precision OP amp circuit, High precision voltage divider
H
■Features
・
High precision resistor networks
Combination of different resistance is available for custom circuit.
[i=s]This post was last edited by donatello1996 on 2020-7-19 18:51[/i]The high-end models of the STM32F4 and STM32F7 series can use the DMA2D graphics accelerator to quickly move the graphics image ca...
donatello1996Special Edition for Assessment Centres
Download the energiainstallation driver from energia.nu. Some computers may need to disable digital signatures. I won’t go into the routine operations. There are also methods to disable digital signat...
Many people wonder what Wi-Fi 6E is? How is it different from the Wi-Fi we usually use? Today, I will show you the latest Wi-Fi technology.What is Wi-Fi 6?Before introducing Wi-Fi 6E, we must first un...
Requirement: Pin MMC2_CMD (output mode 7: gpio2_0) outputs high and low levels to feed the watchdog.
In uboot:
int ctc_init_mmc2cmd_gpio(void){int ret=0;int gpio=64;//MMC2_CMD==gpio2_0 64ret=gpio_requ...
[i=s]This post was last edited by lidonglei1 on 2019-3-21 13:56[/i] [align=left][color=rgb(51, 51, 51)][b]One time when I took my child to the mall, he was very interested in a music box made of wood ...
0 Introduction
With the rapid development of science and technology, in the fields of military, aerospace, test and measurement, people have put forward higher requirements for the sampling...[Details]
Composition and structure of air conditioner power circuit
1. Types of air conditioner power circuits
At present, there are two main power supply circuits used in air conditioners: one is...[Details]
According to foreign media reports, most driver assistance technologies focus on the few seconds before a collision, but Ford's latest post-collision braking function is designed to address the situ...[Details]
Autonomous driving technology is inseparable from the 3D information of the surrounding environment obtained by LiDAR, but have you heard of "4D LiDAR"? For driverless cars, in addition to the 3D inf...[Details]
The development of LED may go through three stages: cultivation stage, popularization stage and differentiation stage. The cultivation stage has passed, which should be from 2008 to 2012; the popular...[Details]
According to the link of the detection process, IC integrated circuit detection is divided into design verification, front-end measurement and back-end detection.
Both optical technology and ...[Details]
CoreWing Information Technology completed nearly RMB 500 million in Series B financing and is committed to becoming the industry's leading IoT smart terminal system SoC chip company Recently, CoreW...[Details]
Introduction In the design of electronic products, human-computer interaction display interface is an indispensable task. Currently, the commonly used LCD displays are seven-segment stroke type, whi...[Details]
Introduction: This article mainly introduces the PIC microcontroller software simulator PICSIM and its use to help you learn more about PIC microcontrollers. We know that microcontroller developmen...[Details]
How to design RF and digital-analog circuits on the same PCB?
手持无线通信设备和遥控设备的普及推动着对模拟、数字和RF混合设计需求的显著增长。手持设备、基站、遥控装置、蓝牙设备、计算机无线通信功能、众多消费电器以及军事/航空航天系统现需要采用RF技术。
For many years, RF design has req...[Details]
The 12Vdc mobile battery charger circuit diagram can provide up to 20V output from a 12V car supply, allowing constant current charging of NiCad battery cells with a maximum of around 18V.
...[Details]
Recently, Jucan Optoelectronics expressed in an institutional survey that Mini is now experiencing a tight development, and the application end is actively promoting various solutions. The company cu...[Details]
Recently, Tesla announced a new patent. The patent application is titled "Device and method for monitoring battery deformation". The official patent claims that it can monitor battery deformation in ...[Details]
Recently, Littelfuse released its third-quarter financial report on October 29, 2024. According to the financial report, net sales in the third quarter were US$609.8 million, a year-on-year decreas...[Details]
Special Edition for Assessment Centres
京公网安备 11010802033920号
EEWORLD
