85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Potentiometer Specifications
Initial Electrical Characteristics
1
Conductive Plastic Element
Cermet Element
Standard Resistance Range
Linear Tapers (A, B, E, & H) ..................................................................(B & E) 1 K ohms to 1 megohm ............. (A & H) 100 ohms to 1 megohm
Audio Tapers (C, D, F, G, S, & T) .........................................................(D, G, S, & T) 1 K ohms to 1 megohm ... (C & F) 1 K ohms to 1 megohm
Total Resistance Tolerance .........................................................................±20 % or 10 % ...................................... ±10 % or 5 %
Absolute Minimum Resistance ...................................................................2 ohms maximum .................................. 2 ohms maximum
Operating Temperature Range ...................................................................-40 °C to +125 °C.................................. -40 °C to +125 °C
Storage Temperature Range ......................................................................-55 °C to +125 °C.................................. -55 °C to +125 °C
Temperature Coefficient Over Storage Temperature Range ......................±1,000 ppm/°C ...................................... ±150 ppm/°C
Vibration (Single Section) ...........................................................................15 G ....................................................... 15 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Shock (Single Section) ...............................................................................30 G ....................................................... 30 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Total Resistance Shift ...........................................................................±10 % maximum ................................... ±5 % maximum
Rotational Life (No Load) ............................................................................100,000 cycles ...................................... 100,000 cycles
Total Resistance Shift ...........................................................................(Linear taper) 10 ohms or ..................... (All tapers) ±5 % TRS maximum
Moisture Resistance (MIL-STD-202, Method 103, Condition B)
Total Resistance Shift ...........................................................................(B & E tapers) ±10 % maximum ........... ±5 % maximum (all tapers)
IP Rating .....................................................................................................IP 40 ...................................................... IP 40
Starting and Running Torque (Non-Locking Bushings)
Single Section ................................................................................................................................................................. 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Dual Section .................................................................................................................................................................... 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Triple Section ................................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Quadruple Section .......................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Starting and Running Torque (Locking Bushings) ..................................................................................................... 0.14 to 2.82 N-cm (0.2 to 4.0 oz.-in.)
Shaft Locking Torque with Locknut @ 10 in-lb. (B & E Bushings) ........................................................................................................ 14 N-cm (20 oz-in.)
Mounting ...................................................................................................................................................................1.7-2.0 N-m (15-18 lb.-in.) maximum
Weight (Single Section).............................................................................................................................................................................. 21 grams maximum
(Each Additional Section) ...................................................................................................................................................................... 6 grams maximum
Terminals .......................................................................................................................................................................... Printed circuit terminals or J-Hooks
Soldering Condition .................................................................. Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.
Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux.
Marking.......................................................................... Manufacturer’s trademark, wiring diagram, date code and resistance, manufacturer’s part number
Ganging (multiple section potentiometers) ..................................................................................................................................................... 4 cup maximum
Hardware ...........................................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.
For dimensional drawings see pages 3 & 4.
For ordering information see page 5.
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
*RoHS Directive 2002/95/EC Jan 27, 2003 including Annex.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
81/82 - 5/8 ” Square Single-Turn Panel Control
85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Rotary Switch Specifications
Initial Electrical Characteristics
1
Contacts:
DPST ...............................................................................................................................................................................N.O/N.O.,N.C./N.C. or N.O./N.C.
DPDT ................................................................................................................................................................................2 N.O./N.C. (break before make)
Power Rating (Resistive Load):
DPST ............................................................................................................ 2 A @ 125 volts RMS-60 Hz or 2 A @ 28 VDC, 1 A @ 250 volts RMS-60 Hz
DPDT ........................................................................................................................................................... 1 A @ 125 volts RMS-60 Hz or 1 A @ 28 VDC
Operating Temperature Range ...........................................................................................................................................................................0 °C to +70 °C
Storage Temperature Range ........................................................................................................................................................................ -65 °C to +125 °C
Vibration (Dual Section) ....................................................................................................................................................................................................... 8 G
(Triple Section) .................................................................................................................................................................................................... 5 G
(Quadruple Section) ........................................................................................................................................................................................... 3 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Shock (Dual Section) ......................................................................................................................................................................................................... 20 G
(Triple Section) ...................................................................................................................................................................................................... 15 G
(Quadruple Section) ............................................................................................................................................................................................. 10 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Rotational Life ..................................................................................................................................................................................................... 25,000 cycles
Switch Actuating Torque (50% Duty cycle @ Rated Power Load) .................................................................................. 1.41 to 4.94 N-cm (2 to 7 oz.-in.)
Contact Resistance ...................................................................................................................................................................... 100 milliohms maximum
Moisture Resistance (MIL-STD-202, Method 106, Condition B)
Contact Resistance (0.1 VDC-10 mA) ............................................................................................................................................ 10 milliohms maximum
Switch Housing Material ................................................................................................................. High temperature, flame retardant, thermosetting plastic
Mechanical Characteristics
1
Actuating Torque (Each Section, Switch Module Only) ....................................................................................................... 3.53 to 10.6 N-cm (5 to 15 oz.-in.)
Running Torque (Out of Detent, 2-4 Module Assembly)..................................................................................................... 0.21 to 1.41 N-cm (0.3 to 2 oz.-in.)
Detent ..................................................................................................................................................................................................... CW or CCW standard
Contact Materials ..........................................................................................................................................................................Fine silver with gold overlay
Terminal Styles .................................................................................................................................................................................................. Solder lug only
Standard Orientation ..............................................................................................................................................................In-line with control terminals
Optional .......................................................................................................................................................................... Rotated 90 ° CCW from standard
Terminal Strength (Before and After Soldering Heat Exposure) .......................................................................................................... 0.9 Kg (2 lbs.) minimum
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
In January 2020 , the German Institute for Standardization ( DIN) and the Association of German Electrical Engineers (VDE) V0884-10: 2006-12 is no longer a valid certification standard for evaluating ...
I just started working in the automotive electronics industry and I don't know the rules of this industry. I would like to ask the experts in this field to help me clear my ignorance. Thank you! In ad...
Recently, in the exploration of ultra-wideband (UWB) technology (part 1), UWB was compared with other standards. Let's take a look.There are many factors to consider when designing an indoor positioni...
1. After setting up the development correctly, you can test whether the code can run correctly. A more convenient way is to download the EFR Connect Android app.
After startup, enter the demo page, wi...
[color=#ff0000]A: How can I encapsulate a GPIO into a node of /sys/device/platform/rst. [/color] [color=#000000]B: Does it have to be in this directory /sys/device/platform/? Is there a way to only pu...
The hardware serial port has a FIFO function, so the received data will be put into the buffer. Since the GPIO simulation has no buffer, I "copied" a FIFO work myself.
fifi.c
/**************FIFO Begin...
"There are currently two grid maintenance tasks, zero grid operation risks, and zero equipment defects..." On March 16, the duty personnel of the Distribution Control Center of Mingxi County Power ...[Details]
With the development of new energy vehicles, more and more new automotive electronic products such as sensors, chips, power batteries, etc. are entering the automotive industry, and the term "automot...[Details]
Introduction EVM or Error Vector Magnitude is essentially a scalar measurement of digital modulation accuracy and is an important figure of merit for any digital modulation source. This article descr...[Details]
According to Reuters, Trump announced at the G20 Osaka Summit that he would allow US companies to sell technology products to Huawei. However, the US Department of Commerce has not yet clarified whet...[Details]
Electrocardiogram is an important means of diagnosing heart disease. However, due to various reasons, it is difficult to capture abnormal electrocardiograms with ordinary electrocardiographs. Although...[Details]
Multilayer ceramic (MLC) capacitors have become extremely popular in power electronics due to their small size, low equivalent series resistance (ESR), low cost, high reliability, and high ripple...[Details]
Arbitrary Waveform Generator
Technology Category: Test and Measurement Source: Electronic Product World/ Northwestern Polytechnical University School of Navigation Ren Xuke Zhao Junwei Zhou Ming...[Details]
On March 27, the Wall Street Journal reported yesterday that SK Hynix plans to invest approximately US$4 billion (IT Home Note: currently approximately RMB 28.92 billion) to build an advanced chip ...[Details]
PXI bus is a new generation of instrument bus implemented by NI based on PCI, a computer peripheral bus. It has become the industry's open bus standard. The digitizer module based on PXI bus is an ...[Details]
Huawei founder Ren Zhengfei made his first appearance at the World Economic Forum in Davos after a five-year absence, becoming the focus of attention of the guests on the first day of the forum. Ten ...[Details]
On February 6, 2018, Elon Musk launched his own Tesla Roadster supercar into space using Space X's heavy-duty Falcon rocket. According to the latest news, the red electric sports car is still explori...[Details]
One of the emerging trends in the
3G
mobile phone space is the adoption and growth of application software (so called "apps") that are written specifically for a particular function on a ...[Details]
Label: FABAS Function: Floating point absolute value function
Entry condition: Operand is in .
Exit information: Result is still in .
Affected resources: A Stack requirement: 2 bytes
FABS: MOV A,@...[Details]
Fluke DSX2-5000 and DSX2-8000 network testers need to set up a twisted pair test. The setup steps are as follows: 1. On the Home screen, tap the Test Settings panel. 2. On the Change Test screen, sel...[Details]
Non-contact temperature sensor is a sensor that uses infrared technology to measure the surface temperature of an object. It has the advantages of fast measurement speed, high accuracy, and no envi...[Details]
Analogue and Mixed Signal
京公网安备 11010802033920号
EEWORLD
