Specifications are limited by the circuit and resistance value.
Please contact us separately.
3 digits
●
Resistor Networks：RNX, RTX, RTY
RNX
Circuit
Code
RNX: Custom Resistor Network
RTX,RTY: SOT-23 Resistor network
●
Resistor Networks：RDA, RDB
RDA
Circuit
Code
RDA: Dual terminator network
RDB: Differential terminator network
Example
Q20
Package
Symbol
Package type symbol＋
Number of pins
Example
T
Terminal
Surface Material
T :Sn
TE
Taping
TE: Plastic
embossed
5001
Custom
Code
Q20
Package
Symbol
Same as above
(Except Q24, N14, N08)
T
Terminal
Surface Material
T:Sn
TE
Taping
TE: Plastic
embossed
471J
Nominal Resistance
& Tolerance of R1
3 digits G: ±2%
J : ±5%
511J
H
Contact us when you have control request for environmental hazardous material other than the substance specified by EU-RoHS.
Nominal Resistance
T.C.R.
& Tolerance of R2 （×10
−6
/K）
3 digits G: ±2%
E :±25
J : ±5%
C:±50
H:±100
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment.
Malfunction or failure of the products in such applications may cause loss of human life or serious damage.
Oct. 2020
www.koaglobal.com
■Ratings
Package
Package Symbol
Package Power Rating
Resistance Range
Max. Working Voltage
Rated Voltage
Rated Ambient Temp.
Operating Temp. Range
10Ω〜1kΩ
1.1kΩ〜
Q16
0.8W
QSOP
Q20
1.0W
Q24
1.0W
N08
0.4W
SOIC
N14
0.6W
N16
0.8W
SOT-23
S03
0.2W
Power Rating 200mW/Resistor Element
※1
Power Rating 50mW/Resistor Element
※1
100V
√￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣
Rated Power×Nominal Resistance Value, Rated Voltage should not exceed Max. Working Voltage.
＋70℃
−55℃〜＋125℃
※2
Above ratings are based on the thermal resistances using a multi-layer circuit board (EIA/JESD51). For mounting on a mono-layer board, power derating shall be needed. Please inquire of us about
conditions.
※1 Total power consumption of all elements should not exceed the package power rating.
※2 About operating temperature range −55℃〜＋155℃, We can provide as custom devices. Please inquire of us about it.
●Standard Resistor Networks
Circuit
Code
Circuit Schematics
（Top View）
Pin n
Number
of Pins
T.C.R.
（×10
−6
/K）
E:±25
C:±50
H:±100
Resistance Range
（Ω）
E24
and Absolute Tolerance
F:±1%
G:±2%, J:±5%
100〜100k 100〜100k
51〜100k
30〜100k
n/2
51〜100k
10〜100k
Circuit
Code
Circuit Schematics
（Top View）
Pin n
R1
Number
of Pins
T.C.R.
（×10
−6
/K）
E:±25
Resistance Range(Ω) (E24)
and Resistance Tolerance
G:±2%, J :±5%
Network Resistors
Pin n
RBA
R
8, 14, 16
R
20, 24
n/2
Number of Pins : n=8,16,20,24
RDA
R2
-
R1
R2
-
16, 20
C:±50
H:±100
Pin n
R1
Pin 1
Pin n
R
Pin n
Pin 1
Pin 1
n/2
R1=
150〜10k
R1: R2=
1:1〜1: 4
Pin n
Pin
:
Number of Pins
n
n=8,16,20,24
E:±25
n
100〜100k
Pin
100〜100k
R
Pin n
R1
R2
E:±25
C:±50
H:±100
RBB
R
Pin 1
n/2
Pin
8, 14, 16
20, 24
C
R
n
C:±50
R1
R
R2
R1
Pin 1
51〜100k
30〜100k
n/2
51〜100k
10〜100k
100〜40k
2R
n/2
RDB
Pin 1
R1
Pin 1
n/2
16, 20
R2
R1
Pin
Number
1
Pins
R
2
1
n/2
: n=8,16,20,24
R
of
H:±100
E:±25
C:±50
Pin 1
R1=
150〜10k
R1: R2=
1:1〜1: 4
Pin 1
Number of Pins : n=3,SOT-23 Only
Pin 1
100〜40k
Pin n
R
R
Pin n
RTX
n/2
Pin n
R
1
R
2
R
2R
2R
R
R
2
3
SOT-23
Only
2R
2R
Number of Pins : n=8,16,20,24
RLA
R
2R
2R
R
2R
2R
n/2
14, 16
H:±100
1k〜30k
H:±100
2R
51〜40k
2R
51〜40k
2R
Pin 1
Pin 1
n/2
ber of Pins : n=8,16,20
Number of Pins : n=3,SOT-23 Only
Pin 1
n/2
■Performance
Test Items
Resistance
T.C.R.
Resistance to soldering heat
Rapid change of temperature
Moisture resistance
Endurance at 70℃
High temperature exposure
Performance Requirements
ΔR±
（％＋0.05Ω）
Limit
Typical
25℃
＋25℃/−55℃, ＋25℃/125℃
260℃±5℃, 10s±1s
−55℃
（30min.）
/＋125℃
（30min.）, 100 cycles
40℃±2℃, 90〜95%RH, 1000h
1.5h ON/0.5 h OFF cycle
70℃±2℃, 1000 h
1.5 h ON/0.5 h OFF cycle
＋125℃, 1000 h
Within specified tolerance
Within specified T.C.R.
0.1
※3
0.5
※3
Test Methods
0.05
0.05
0.05
0.05
0.10
0.5
※3
0.25
※3
0.25
※3
※3 Guaranteed value differs depending on resistance value.
■Precautions for Use
・
he resistor of this product is formed by narrow patterning a thin metal film. Thus, application of excessive voltage causes burn and destruction of the resistive
T
film, abnormality in resistance or open resistance and loss of proper function. The properly and electrostatically measured taping materials are used for the
components, but attention should be paid to the fact that there is some danger the parts may be destructed by static electricity(equivalent to 500V and more at
100pF, 1.5kΩ) to cause a change in resistance in the conditions of an excessive dryness when mounting on the boards. Similarly, care should be given not to apply
the excessive static electricity at the time of mounting on the boards. When designing, consideration can be taken into withstanding ESD for customized KPC
products. Please consult with us about the details.
・Hand
soldering by iron soldering or repairment are not recommended because KPC is a multi-pin product.
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment.
Malfunction or failure of the products in such applications may cause loss of human life or serious damage.
Oct. 2020
www.koaglobal.com
NETWORKS
EU
RoHS
KPC RIA
KPC RNX
Isolated Resistor Networks
Custom Resistor Networks
■Applications
・
utomotives, medical instrument, industrial machines, Measurement equipment
A
・
omputers and networks
C
・
igh precision OP amp circuit, High precision voltage divider
H
■Features
・
High precision resistor networks
Combination of different resistance is available for custom circuit.
In December last year, when the BabyOS open source project was launched, it was shared on eeworld: https://en.eeworld.com/bbs/thread-1102261-1-1.html
At that time, it was not mature enough and was not...
[i=s]This post was last edited by bigbat on 2019-1-8 11:39[/i] I have been using power modules from Jinshengyang and Meanwell for my projects, but they are too expensive. A 2W AC-DC output 5V, input 2...
Imagine how a photo can be clear? Of course, the more pixels there are, the closer the original information contained in the photo is to reality, and the clearer it looks.The waveform we see on an osc...
In what fields are panoramic HD video recorders used? Panoramic HD video recorders support recording videos and matching audio from at least4HD cameras into one video file, and displaying them on the ...
In China, the production volume of industrial products is increasing every year. Therefore, users have higher and higher requirements for product quality. Here we are not only talking about performanc...
The FLASH memory module of the MSP430 FLASH microcontroller is divided into several segments according to different capacities, among which the information memory SegmengA and SegmentB each have 128 ...[Details]
In the program, two counter variables are used, COUNT1 for the ones digit and COUNT10 for the tens digit. In addition, after each LED is lit 5 times, the ones digit is automatically increased by 1, a...[Details]
It is ideal to drive with ULN and transistors, but the efficiency of optocouplers is not high. ULN2003 is usually used for driving. If an NPN transistor is used, one end of the relay is...[Details]
(1) JMP unconditional transfer instruction Instruction format: JMP purpose Command function: Causes the program to unconditionally transfer to the destination specified in the instruction for exe...[Details]
Why are multiple register access instructions needed? ldr/str can only access 4 bytes of memory per cycle. If you need to read and write memory in batches, it is too slow. The solution is stm/ld Ex...[Details]
Beijing Hyundai has set the market sales target for the Elantra plug-in hybrid at 3,500 units this year. On August 14, Beijing time, the Beijing Hyundai Elantra Plug-in Hybrid was simultaneously lau...[Details]
Abstract: In order to solve the problem of being unable to monitor the temperature and humidity of the equipment cabin of the unmanned aerial platform in real time, the design of the remote monitor...[Details]
Apple is working on ways to enhance live sports broadcasts by letting viewers choose their own viewing angles and single out elements they want more information about. You might watch a basket...[Details]
The error of the previous course design is very small. I share it with you. There are programs and simulations. I have also made real objects. You can switch the range between 10 times and 1 times wi...[Details]
On January 21, the large-scale production line of coal-based electrochemical energy storage materials of Beijing Low Carbon and Clean Energy Research Institute of China Energy Group (hereinafter re...[Details]
On November 18, the official website of the Shanghai Stock Exchange showed that the IPO of energy technology company Honeycomb Energy on the Science and Technology Innovation Board was accepted. Accor...[Details]
Summary Precision signal chain designers are challenged to meet noise performance requirements in medium bandwidth applications, often ending up with a trade-off between noise performance and accur...[Details]
Feature Request: 1): The green light has a 25s countdown. There is a 5s yellow light time when the green light transitions to the red light. The red light will directly turn green after 25s. 2): Pres...[Details]
1. 1 W to 8 W solution
Low- power
LED
general lighting applications
from 1 W to 8 W
include G13, GU10, PAR16, PAR20, and recessed lights. The input voltage range fo...[Details]
It is often assumed that components of electric vehicles would be state-of-the-art, and charging barriers are no exception. After all, charging a car is a frequent, daily necessity. Charging operat...[Details]
MCU
京公网安备 11010802033920号
EEWORLD
