85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Potentiometer Specifications
Initial Electrical Characteristics
1
Conductive Plastic Element
Cermet Element
Standard Resistance Range
Linear Tapers (A, B, E, & H) ..................................................................(B & E) 1 K ohms to 1 megohm ............. (A & H) 100 ohms to 1 megohm
Audio Tapers (C, D, F, G, S, & T) .........................................................(D, G, S, & T) 1 K ohms to 1 megohm ... (C & F) 1 K ohms to 1 megohm
Total Resistance Tolerance .........................................................................±20 % or 10 % ...................................... ±10 % or 5 %
Absolute Minimum Resistance ...................................................................2 ohms maximum .................................. 2 ohms maximum
Operating Temperature Range ...................................................................-40 °C to +125 °C.................................. -40 °C to +125 °C
Storage Temperature Range ......................................................................-55 °C to +125 °C.................................. -55 °C to +125 °C
Temperature Coefficient Over Storage Temperature Range ......................±1,000 ppm/°C ...................................... ±150 ppm/°C
Vibration (Single Section) ...........................................................................15 G ....................................................... 15 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Shock (Single Section) ...............................................................................30 G ....................................................... 30 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Total Resistance Shift ...........................................................................±10 % maximum ................................... ±5 % maximum
Rotational Life (No Load) ............................................................................100,000 cycles ...................................... 100,000 cycles
Total Resistance Shift ...........................................................................(Linear taper) 10 ohms or ..................... (All tapers) ±5 % TRS maximum
Moisture Resistance (MIL-STD-202, Method 103, Condition B)
Total Resistance Shift ...........................................................................(B & E tapers) ±10 % maximum ........... ±5 % maximum (all tapers)
IP Rating .....................................................................................................IP 40 ...................................................... IP 40
Starting and Running Torque (Non-Locking Bushings)
Single Section ................................................................................................................................................................. 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Dual Section .................................................................................................................................................................... 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Triple Section ................................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Quadruple Section .......................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Starting and Running Torque (Locking Bushings) ..................................................................................................... 0.14 to 2.82 N-cm (0.2 to 4.0 oz.-in.)
Shaft Locking Torque with Locknut @ 10 in-lb. (B & E Bushings) ........................................................................................................ 14 N-cm (20 oz-in.)
Mounting ...................................................................................................................................................................1.7-2.0 N-m (15-18 lb.-in.) maximum
Weight (Single Section).............................................................................................................................................................................. 21 grams maximum
(Each Additional Section) ...................................................................................................................................................................... 6 grams maximum
Terminals .......................................................................................................................................................................... Printed circuit terminals or J-Hooks
Soldering Condition .................................................................. Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.
Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux.
Marking.......................................................................... Manufacturer’s trademark, wiring diagram, date code and resistance, manufacturer’s part number
Ganging (multiple section potentiometers) ..................................................................................................................................................... 4 cup maximum
Hardware ...........................................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.
For dimensional drawings see pages 3 & 4.
For ordering information see page 5.
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
*RoHS Directive 2002/95/EC Jan 27, 2003 including Annex.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
81/82 - 5/8 ” Square Single-Turn Panel Control
85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Rotary Switch Specifications
Initial Electrical Characteristics
1
Contacts:
DPST ...............................................................................................................................................................................N.O/N.O.,N.C./N.C. or N.O./N.C.
DPDT ................................................................................................................................................................................2 N.O./N.C. (break before make)
Power Rating (Resistive Load):
DPST ............................................................................................................ 2 A @ 125 volts RMS-60 Hz or 2 A @ 28 VDC, 1 A @ 250 volts RMS-60 Hz
DPDT ........................................................................................................................................................... 1 A @ 125 volts RMS-60 Hz or 1 A @ 28 VDC
Operating Temperature Range ...........................................................................................................................................................................0 °C to +70 °C
Storage Temperature Range ........................................................................................................................................................................ -65 °C to +125 °C
Vibration (Dual Section) ....................................................................................................................................................................................................... 8 G
(Triple Section) .................................................................................................................................................................................................... 5 G
(Quadruple Section) ........................................................................................................................................................................................... 3 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Shock (Dual Section) ......................................................................................................................................................................................................... 20 G
(Triple Section) ...................................................................................................................................................................................................... 15 G
(Quadruple Section) ............................................................................................................................................................................................. 10 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Rotational Life ..................................................................................................................................................................................................... 25,000 cycles
Switch Actuating Torque (50% Duty cycle @ Rated Power Load) .................................................................................. 1.41 to 4.94 N-cm (2 to 7 oz.-in.)
Contact Resistance ...................................................................................................................................................................... 100 milliohms maximum
Moisture Resistance (MIL-STD-202, Method 106, Condition B)
Contact Resistance (0.1 VDC-10 mA) ............................................................................................................................................ 10 milliohms maximum
Switch Housing Material ................................................................................................................. High temperature, flame retardant, thermosetting plastic
Mechanical Characteristics
1
Actuating Torque (Each Section, Switch Module Only) ....................................................................................................... 3.53 to 10.6 N-cm (5 to 15 oz.-in.)
Running Torque (Out of Detent, 2-4 Module Assembly)..................................................................................................... 0.21 to 1.41 N-cm (0.3 to 2 oz.-in.)
Detent ..................................................................................................................................................................................................... CW or CCW standard
Contact Materials ..........................................................................................................................................................................Fine silver with gold overlay
Terminal Styles .................................................................................................................................................................................................. Solder lug only
Standard Orientation ..............................................................................................................................................................In-line with control terminals
Optional .......................................................................................................................................................................... Rotated 90 ° CCW from standard
Terminal Strength (Before and After Soldering Heat Exposure) .......................................................................................................... 0.9 Kg (2 lbs.) minimum
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
I recently wanted to use Jlink to connect to S5P4418 and play bare metal programming, but I found that Jlink could not connect to the CPU, as shown in the figure. I asked netizens to help me write a J...
[align=left][color=rgb(85, 85, 85)][font="][size=4]Using the hardware accelerator to calculate 128-point fft, the data was wrong at the beginning. After many attempts, it was finally successful under ...
[align=center][media=x,500,375]https://v.youku.com/v_show/id_XMzE2NDE1MjE2.html?spm=a2h0k.11417342.soresults.dtitle&s=56a3eba4e5a311e0a046[/media][/align] [size=4]First, let me show you a drone that I...
Microcontrollers have become an indispensable part of our lives. Many people may not understand why we say that microcontrollers are everywhere in our lives when we have not seen anything like them. L...
[i=s]This post was last edited by qwqwqw2088 on 2018-11-14 08:56[/i] [size=4] When it comes to designing a successful power supply, power supply layout is one of the most important aspects. However, e...
After a long period of rapid development, LED display screens have now been widely used in the display parts of finance, transportation, entertainment, sports and other fields. With the rapid dev...[Details]
Qualcomm launches globally certified module reference design to promote the popularization of 5G in multiple industries
Key points:
•
Snapdragon X75, X72, and X3...[Details]
In order to drive the ARF2496K chip and do the porting on STM32, the first step to solve is the timing problem. Obviously, the delay method similar to 51 is not applicable under STM32, so it is natur...[Details]
ARM microprocessor supports 7 operating modes, as follows: User mode (usr): The normal program execution state of the ARM processor. Fast interrupt mode (fiq): used for high-speed data transmission ...[Details]
Smart wearable devices have set off an artificial intelligence revolution. Using artificial intelligence technology, the backend server can timely understand your needs and thoughts, help you share...[Details]
1. Overview
A/D converters are used to convert analog quantities into digital quantities. According to the conversion principle, they can be divided into four types: counting type, double integr...[Details]
The AI trend that swept the world in 2023 has heated up the concept of embodied intelligence.
Humanoid robots,
which are regarded as the ideal carriers of embodied intelligence
, have...[Details]
A PIC16F877A microcontroller has a 16-bit timer TIMER1, which we use to control 8 servos (i.e. sequential pulse output). In this way, a single microcontroller can control 8 servos. Use 8 IO ports to ...[Details]
Introduction
Embedded systems are application-centric, computer-based systems with tailorable software and hardware to meet the strict requirements of application systems for functions, reliabi...[Details]
According to foreign media reports, Ford has obtained a patent for a car sound emission control system. The patent application was submitted on October 15, 2020, and published by the US Patent and Tr...[Details]
The inverter consists of the main circuit, power circuit, IPM drive and protection circuit, cooling fan and other parts. Its structure is mostly unitized or modular. Incorrect use or unreasonable s...[Details]
When will BOE, the king of Chinese panels, be able to reverse the situation of increasing revenue but not profits? BOE Technology Group Co., Ltd. (000725.SZ), which has always been known in China a...[Details]
In single-phase capacitor starting, capacitor running and dual-value capacitor asynchronous motors, capacitors play an important role in the starting or running of the motor. If the capacitor is open...[Details]
A weighing sensor is a force measuring instrument that can convert the force signal of the measured object into a measurable electrical signal output. It is used in industries such as industry, electr...[Details]
Overview CH548 is an enhanced E8051 core microcontroller compatible with MCS51. 79% of the instructions are single-byte single-cycle instructions. It runs fast and has built-in 32KB Flash-ROM and 2K+...[Details]