ATC 100 E Series
Porcelain High RF Power
Multilayer Capacitors
• Case E Size
(.380" x .380")
• High Q
• Low ESR/ESL
• High RF Power
• Extended WVDC
up to 7200 VDC
• Capacitance Range
1 pF to 5100 pF
• Ultra-Stable Performance
• High RF Current/Voltage
• High Reliability
• Available with
Encapsulation Option*
ELECTRICAL AND MECHANICAL
SPECIFICATIONS
QUALITY FACTOR (Q):
Greater than 10,000 (1 pF to 1000 pF) @ 1 MHz.
Greater than 10,000 (1100 pF to 5100 pF) @ 1 KHz.
ATC, the industry leader, offers new improved ESR/ESL performance
for the 100 E Series RF Capacitors. This high Q multilayer capacitor
is ultra-stable under high RF current and voltage applications. High
density porcelain construction provides a rugged, hermetic package.
ATC offers an encapsulation option for applications requiring ex-
tended protection agains arc-over and corona.
Typical functional applications: Bypass, Coupling, Tuning, Imped-
ance Matching and DC Blocking.
Typical circuit applications: HF/RF Power Amplifiers, Transmitters,
Antenna Tuning, Plasma Chambers and Medical (MRI coils).
*For leaded styles only
TEMPERATURE COEFFICIENT OF CAPACITANCE (TCC):
+90 ±30 PPM/°C (-55°C to +125°C)
INSULATION RESISTANCE (IR):
1 pF to 5100 pF:
10
5
Megohms min. @ +25°C at 500 VDC.
10
4
Megohms min. @ +125°C at 500 VDC.
WORKING VOLTAGE (WVDC):
See Capacitance Values Table, page 2.
DIELECTRIC WITHSTANDING VOLTAGE (DWV):
250% of WVDC for capacitors rated at 500 volts DC or less for 5 seconds.
150% of WVDC for capacitors rated at 1250 volts DC or less for 5 seconds.
120% of WVDC for capacitors rated above 1250 volts DC for 5 seconds.
RETRACE:
Less than ±(0.02% or 0.02 pF), whichever is greater.
ENVIRONMENTAL TESTS
ATC 100 E Series Capacitors are designed and manufactured to
meet and exceed the requirements of EIA-198, MIL-PRF-55681
and MIL-PRF-123.
THERMAL SHOCK:
MIL-STD-202, Method 107, Condition A.
AGING EFFECTS:
None
PIEZOELECTRIC EFFECTS:
None
(No capacitance variation with voltage or pressure).
MOISTURE RESISTANCE:
MIL-STD-202, Method 106.
LOW VOLTAGE HUMIDITY:
MIL-STD-202, Method 103, Condition A, with 1.5 Volts DC ap-
plied while subjected to an environment of 85°C with 85% rela-
tive humidity for 240 hours min.
CAPACITANCE DRIFT:
±(0.02% or 0.02 pF), whichever is
greater.
OPERATING TEMPERATURE RANGE:
From -55°C to +125°C (No derating of working voltage).
LIFE TEST:
MIL-STD-202, Method 108, for 2000 hours, at 125°C.
Voltage applied.
200% of WVDC for capacitors rated at 500 volts DC or less.
120% of WVDC for capacitors rated at 1250 volts DC or less.
100% of WVDC for capacitors rated above 1250 volts DC.
TERMINATION STYLES:
Available in various surface mount and leaded styles.
See Mechanical Configurations, page 3.
TERMINAL STRENGTH:
Terminations for chips and pellets
withstand a pull of 10 lbs. min., 25 lbs. typical, for 5 seconds in
direction perpendicular to the termination surface of the capaci-
tor. Test per MIL-STD-202, method 211.
ATC # 001-809 Rev. M, 9/14
ATC 100 E Capacitance Values
RATED WVDC CAP. CAP.
CAP. CAP.
TOL.
CODE (pF)
STD.
EXT. CODE (pF)
1R0
1R1
1R2
1R3
1R4
1R5
1R6
1R7
1R8
1R9
2R0
2R1
2R2
2R4
2R7
3R0
3R3
3R6
3R9
4R3
4R7
5R1
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5R6
6R2
6R8
7R5
8R2
9R1
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
TOL.
RATED WVDC CAP. CAP.
STD.
EXT. CODE (pF)
470
510
560
620
680
750
820
910
101
111
121
131
151
161
181
201
221
241
271
301
331
361
TOL.
RATED WVDC CAP. CAP.
STD.
EXT. CODE (pF)
391
431
471
511
561
621
681
751
821
911
102
112
122
152
182
222
272
302
332
392
472
512
VOLTAGE
TOL.
RATED WVDC
STD.
3600
EXT.
47
51
56
62
68
7200
75
82
91
100
110
120 F, G, J,
3600
130 K, M
150
5000
160
180
200
220
240
270
N/A
300
330
360
VOLT.
EXTENDED
EXT.
390
430
470
510
560
620
680
750
820 F, G, J,
910 K, M
1000
1100
1200
1500
1800
2200
2700
3000
3300 G, J,
3900 K, M
4700
5100
EXTENDED VOLTAGE
B, C
D
EXTENDED VOLTAGE
2500
B, C
D
3600 7200
3600 7200
F, G, J
K, M
N/A
1000
EXTENDED VOLTAGE
EXTENDED VOLTAGE
500
VRMS = 0.707 X WVDC
• SPECIAL VALUES, TOLERANCES, MATCHING, AND CAPACITOR ASSEMBLIES ARE AVAILABLE. • ATC’S CUSTOM POWER CAPACITOR ASSEMBLY CATALOG, ATC # 001-900 LISTS
ASSEMBLY OPTIONS. • EXTENDED WORKING VOLTAGES ARE AVAILABLE FOR COMMERCIAL ORDERS ONLY. • ENCAPSULATION OPTION AVAILABLE. PLEASE CONSULT FACTORY.
CAPACITANCE TOLERANCE
J
B
C
D
F
G
K
M
Code
Tol.
±0.1 pF ±0.25 pF ±0.5 pF ±1% ±2% ±5% ±10% ±20%
ATC PART NUMBER CODE
ATC100 E 39 1
Series
Case Size
Capacitance Code:
First 2 significant digits for capacitance.
R=Decimal Point
Indicates number of zeros following digits
of capacitance in picofarads except for decimal values.
Capacitance Tolerance
K
W 3600 X
C
Packaging
C - ATC Matrix Tray (Standard)
T - Tape and Reel, 250 pc. qty.
I - Special Packaging. Consult Factory
Laser Marking
WVDC
Termination Code
The above part number refers to a 100 E Series (case size E) 390 pF capacitor,
K tolerance (±10%), 3600 WVDC, with W termination (Tin /Lead, Solder Plated over Nickel Barrier), laser marking and Waffle-packaging.
ATC accepts orders for our parts using designations
with
or
without
the
“ATC” prefix. Both methods of defining the part number are equivalent,
i.e., part numbers referenced with the “ATC” prefix are interchangeable to
parts referenced without the “ATC” prefix. Customers are free to use either
in specifying or procuring parts from American Technical Ceramics.
For additional information and catalogs contact your ATC
representative or call direct at (+1-631) 622-4700.
Consult factory for additional performance data.
A M E R I C A N
ATC North America
sales@atceramics.com
T E C H N I C A L
ATC Europe
saleseur@atceramics.com
C E R A M I C S
ATC Asia
sales@atceramics-asia.com
2
w w w.a t ce r a m ics .c o m
ATC 100 E Capacitors: Mechanical Configurations
ATC
SERIES
& CASE
SIZE
ATC
TERM.
CODE
CASE SIZE
& TYPECASE SIZE
& TYPE
OUTLINES
W/T IS A
TERMINATION SURFACE
BODY DIMENSIONS
INCHES (mm)
LENGTH
(L)
.380
+.015 -.010
(9.65
+0.38
-0.25)
.380
+.040 -.010
(9.65
+1.02
-0.25)
.380
+.015 -.010
(9.65
+0.38
-0.25)
.380
+.015 -.010
(9.65
+0.38
-0.25)
TL
W
LEAD AND TERMINATION
DIMENSIONS AND MATERIALS
OVERLAP
(Y)
WIDTH
(W)
THICKNESS
(T)
MATERIALS
Y
100E
W
E
Solder Plate
E
Y
W
L
T
Tin / Lead, Solder Plated over
Nickel Barrier Termination
100E
P
L
W
T
Heavy Tin/ Lead Coated,
over Nickel Barrier
Termination
.040 (1.02)
max.
Pellet
Y
100E
T
E
Solderable Nickel
Barrier
Y
RoHS Compliant
Tin Plated over
Nickel Barrier Termination
W
L
T
100E
CA
W
RoHS Compliant
Gold Plated over
Nickel Barrier Termination
.380 ±.010 .170 (4.32)
(9.65 ±0.25)
max.
E
Gold Chip
E
L
T
100E
MS
Microstrip
E
WL
LL
High Purity
Silver Leads
LL = .750 (19.05) min.
WL = .350 ±.010
(8.89 ±0.25)
TL = .010 ±.005
(0.25 ±0.13)
Leads are Attached with
High Temperature Solder.
N/A
Silver-plated Copper Leads
Dia. = .032 ±.002
(.813 ±.051)
LL = 2.25 (57.2) min.
Silver-plated Copper Leads
Dia. = .032 ±.002
(.813 ±.051)
LL = 1.0 (25.4) min.
L
T
100E
AR
Axial Ribbon
E
WL
LL
TL
L
W
T
.380
+.035 -.010
(9.65
+0.89
-0.25)
100E
AW
Axial Wire
E
100E
RW
Radial Wire
Custom lead styles and lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are
RoHS
compliant.
A M E R I C A N
ATC North America
sales@atceramics.com
T E C H N I C A L
ATC Europe
saleseur@atceramics.com
C E R A M I C S
ATC Asia
sales@atceramics-asia.com
3
w w w.a t c e ra m ic s .c o m
ATC 100 E Capacitors: Non-Magnetic Mechanical Configurations
ATC
SERIES
& CASE
SIZE
ATC
TERM.
CODE
OUTLINES
CASE SIZE
& TYPE
W/T IS A
TERMINATION SURFACE
LENGTH
(L)
.380
+.015 -.010
(9.65
+0.38
-0.25)
.380
+.040 -.010
(9.65
+1.02
-0.25)
.380
+.015 -.010
(9.65
+0.38
-0.25)
TL
W
BODY DIMENSIONS
INCHES (mm)
WIDTH
(W)
THICKNESS
(T)
LEAD AND TERMINATION
DIMENSIONS AND MATERIALS
OVERLAP
(Y)
MATERIALS
Y
100E
WN
E
Non-Mag
Solder Plate
Y
L
W
T
Tin/ Lead, Solder Plated over
Non-Magnetic Barrier
Termination
100E
PN
E
Non-Mag
Pellet
Y
L
W
T
.040 (1.02)
max.
Heavy Tin /Lead Coated, over
Non-Magnetic Barrier
Termination
RoHS Compliant
Tin Plated over
Non-Magnetic Barrier
Termination
.380
+.015 -.010
(9.65
+0.38
-0.25)
100E
TN
E
Non-Mag
Solderable Barrier
E
E
L
W
T
100E
MN
Non-Mag
Microstrip
WL
LL
.170 (4.32)
max.
High Purity
Silver Leads
LL = .750 (19.05) min.
WL = .350 ±.010
(8.89 ±0.25)
TL = .010 ±.005
(0.25 ±0.13)
Leads are Attached with
High Temperature Solder.
N/A
Silver-plated Copper Leads
Dia. = .032 ±.002
(.813 ±.051)
LL = 2.25 (57.2) min.
Silver-plated Copper Leads
Dia. = .032 ±.002
(.813 ±.051)
LL = 1.0 (25.4) min
L
LL
TL
W
T
100E
AN
Non-Mag
Axial Ribbon
E
WL
L
T
100E
BN
.380
+.035 -.010
(9.65
+0.89
-0.25
Non-Mag
Axial Wire
100E
RN
E
Non-Mag
Radial Wire
Custom lead styles and lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are
RoHS
compliant.
Suggested Mounting Pad Dimensions
L
39
1K
T
W
L
T
W
Horizontal
Electrode Orientation
B
A
C
D
Vertical
Electrode Orientation
B
Vertical Mount
Horizontal Mount
Pad Size
Normal
Normal
Case E
A M E R I C A N
ATC North America
sales@atceramics.com
391K
A Min.
.165
.405
.385
High Density
.185
B Min.
.030
.050
.030
.050
C Min.
.325
.325
.325
.325
D Min.
.425
.385
.385
.425
High Density
Dimensions are in inches.
T E C H N I C A L
ATC Europe
saleseur@atceramics.com
C E R A M I C S
ATC Asia
sales@atceramics-asia.com
4
w w w. a t c e r am ic s .c o m
DSP and ARM Processors
京公网安备 11010802033920号
EEWORLD
