PENB1020A
Universal 19.2W
Gigabit PoE Adapter
•
10/100/1000
3 Year Warranty
(MbPS) Data Rates
•
Self-contained Injector
•
100-240Vac Universal Input
•
Green DC Power LED
•
Overload and Short Circuit Protection
•
Regulated Output with Low Ripple
•
Compliant to UL/IEC/EN60950-1
•
LPS (Limited Power Source) Compliant
•
RoHS Compliant
Description
The PENB1020A Series of Power-over-Ethernet (PoE) adapters operate from a 90 to 264Vac input
range, and provide up to 19.2W of output power at an output voltage of 48Vdc. These models are
capable of operating with Gigabit Data rates, and include features include diagnostic LED, and
overvoltage, overload, and short circuit protection. This non-compliant adapter does not require a
“handshake” signal to enable the output voltage.
Specifications
All specifications are typical at nominal input, full load at 25°C unless otherwise stated
AC Input
Input Current
Input Inrush Current
Input Protection
100-240Vac +/- 10%, 47-63 Hz single phase
0.5A @ 90Vac
0.25A @ 180Vac
60A peak, cold start
MTBF
Hold-Up Time
Efficiency
Turn-on Time
Rise Time
Short Circuit Protection
Operating Temperature
Storage Temperature
Relative Humidity
Altitude
Safety Standards
Dimensions
>60,000
hours, calculated (7 years)
18mS min. @ 115Vac, 60Hz
60mS min. @ 230Vac, 60Hz
65% minimum
2.0 seconds max., at 115v230Vac, 60Hz
100mS max.@ 115/230Vac, 60Hz
10 minutes max. @ 265Vac, 60Hz
0° to +40°C
-30° to +85°C
5% to 95%, non-condensing
0 to 10,000 ft
UL/IEC/EN60950-1, CE, CB
W: 1.9” x L: 4.44” x H: 1.3”. Weight: 120g
Internal Primary Current Fuse provided,
250Vac/3.15A
Dialectric Withstand
4242Vdc Primary – Secondary,
2,150Vdc Primary–GND, 500Vdc Secondary - GND
Earth Leakage Current
<250µA @ 264Vac, 60Hz
Output Power
Ripple and Noise
Output Voltage
Transient Response
Regulation
Case Material
19.2W continuous, convection cooled
See Chart below
48Vdc Typical
0.5msec for 50% load change typical
See chart below
94V-0 Black Polycarbonate
Models
Model
Number
PENB1020A4800F01
PENB1020A4800N01
Note:
1.
Output
Voltage
48Vdc
48Vdc
Output
Current
0.4A
0.4A
Ripple
& Noise¹
480mV pk-pk
480mV pk-pk
Max.
Power
15.4W
15.4W
Regulation IEEE802.3af
Line
Load Compliant?
±2%
±2%
±5%
±5%
No
No
AC Input
Receptacle
IEC60320, C14
IEC60320, C8
Measured at 20MHz bandwidth, with noise probe as close to output RJ-45 connector as possible, and load terminated with 0.1μF
ceramic and 10μF low ESR electrolytic capacitors.
______________________________________________________________________________________________________________________________
SL Power Electronics Corp
•
6050 King Drive Ventura, CA 93003
•
Phone 805.486.4565
•
Fax 805.832.6131
•
Email: info@slpower.com
•
www.slpower.com
1 of 2
PENB1020A
Universal 19.2W
PoE Gigabit
EMI/EMC Compliance
Conducted Emissions
Radiated Emissions
Static Discharge Immunity
Radiated RF Immunity
EFT/Burst Immunity
Line Surge Immunity
Conducted RF Immunity
Power Frequency Magnetic Field Immunity
Voltage Dip Immunity
Line Harmonic Emissions
Flicker Test
EN55022: 2006+ A1:2007 (Class B)
EN55022: 2006+ A1:2007 (Class B)
EN55024/IEC61000-4-2, 6kV/8kV, Criteria A
EN55024/IEC 61000-4-3, 3V/m, Criteria A
EN55024/IEC 61000-4-4, 2kV, 5kHz, Criteria A
EN55024/IEC 61000-4-5, 1kV/2kV, Criteria A
EN55024/IEC 61000-4-6, 3V (AM 80%, 1kHz), Criteria A
EN55024/IEC 61000-4-8, 3A/m, Criteria A
EN55024/IEC 61000-4-11, 100%, 10mS; 60%, 100mS; 30%, 500mS
Criteria A. 100$, 5000mS, Criteria B
EN61000-3-2: 2006
EN61000-3-3: 2008
3 Year Warranty
Outline Drawing
IEC320 C14 input receptacle shown. Other options available. Consult factory for details and availability.
PSA pinout Alternative B (IEEE 802.3af 33.2.2):
J1 Pins
1
2
3
4
5
6
7
8
Da ta Pa ir 1
Da ta Pa ir 1
Da ta Pa ir 2
+VDC
+VDC
Da ta Pa ir 2
-VDC
-VDC
1
2
3
4
5
6
7
8
J2 Pins
Data Pa i r 1
Data Pa i r 1
Data Pa i r 2
No Connecti on
No Connecti on
Data Pa i r 2
No Connecti on
No Connecti on
Data Sheet © 2014 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication.
Rev. 12/1/2014
However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice.
______________________________________________________________________________________________________________________________
SL Power Electronics Corp
•
6050 King Drive Ventura, CA 93003
•
Phone 805.486.4565
•
Fax 805.832.6131
•
Email: info@slpower.com
•
www.slpower.com
2 of 2