CR02M580.00 - Rev Q - Page 1 of 3
Product Family:
Part Number Series:
Ultra Reliable Chip Resistor
CR Series
Construction:
High Purity Alumina Substrate
Ni alloy thin-film resistive element
SiO2 protective barrier
Wrap around electrodes
100% matte tin over Ni terminations
AEC-Q200 qualified
Anti-Sulfur
Features:
0402, 0603, 0805 and 1206 sizes
TCR’s down to ±5 ppm/°C
Resistance down to 10Ω available
SiO2 barrier provides exceptional
stability and reliability
Maximum reflow temperature = 260°C
±5°C, MSL = 1
Description:
These highly stable precision chip resistors are perfect for demanding applications where high reliability is a must, such
as automotive applications. The incorporation of a SiO2 protective barrier protects the products and allows for a very
stable product with excellent long term reliability.
Product Dimensions:
Dimension
L
W
H
T1
T2
CR0402
(1005)
0.040
±0.002
0.020
±0.002
0.014
±0.002
0.010
±0.004
0.008
±0.004
CR0603
(1608)
0.063
±0.008
0.031
±0.008
0.016
±0.004
0.012
±0.008
0.012
±0.008
CR0805
(2012)
0.079
±0.008
0.049
±0.008
0.016
±0.004
0.016
±0.008
0.016
±0.008
CR1206
(3216)
0.126
±0.008
0.063
±0.008
0.016
±0.004
0.018
±0.008
0.016
±0.008
All dimensions are shown in inches. Metric case sizes are
shown in parenthesis.
Part Numbering:
Ex: CR0603E2002B-T5
Product
Designator
Size W x L
(English)
0402
0603
0805
1206
Temp. Coefficient
of Resistance
(TCR)
M = ±5ppm/°C
Y = ±10ppm/°C
E = ±25ppm/°C
Q = ±50ppm/°C
Resistance Value
4 digits with the first 3
being significant. The
last digit specifies the
number of zeros. “R”
denotes decimal
position as necessary
Resistance
Tolerance
Q = ±0.02%
A = ±0.05%
B = ±0.10%
D = ±0.50%
T&R Packaging
Quantity
-T1 = 1,000
-T5 = 5,000
-T10 = 10,000
(see note)
CR
Note: Refer to available package sizes in the Electrical Specifications section of this document. When requesting quotes
or ordering parts, it is not necessary to add the T&R package quantity (-T#) to the end of the part number. This will
be added by us based on the quantity ordered.
Reflow/ Storage:
Moisture Sensitivity Level = MSL1
Maximum Reflow Temperature =
260°C ± 5°C
Recommended Reflow Profile:
http://www.thin-film.com/uploadedcontent/documents/Soldering_Profile.pdf
Thin Film Technology Corp. / 1980 Commerce Drive, North Mankato, MN 56003 (USA) / (507) 625-8445 /
www.thin-film.com
CR02M580.00 - Rev Q - Page 2 of 3
Electrical Specifications:
Type
Power
(see
note)
CR0402
High power
Normal power
Ultra-reliability
±0.5(D)
CR0603
1/6 Watt
(Old RGH1608-2C)
1/10 Watt
1/16 Watt
±0.05(A),
±0.1(B),
±0.5(D)
±0.5(D)
±0.05(A),
±0.1(B),
±0.5(D)
±0.02(Q),
±0.05(A),
±0.1(B),
±0.5(D)
±0.05(A),
±0.1(B),
±0.5(D)
±0.1(B),
±0.5(D)
±0.5(D)
1/8 Watt
(Old RGH1005-2B)
1/16 Watt
1/32 Watt
±0.05(A),
±0.1(B),
±0.5(D)
±0.02(Q),
±0.05(A),
±0.1(B),
±0.5(D)
Tolerance% (code)
Resistance Range (Ω)
Resistance Offering
TCR ppm/°C (code)
Max Operating Voltage
Operating Temperature
Packaging
Type
Power
(see
note)
10~46.4
47~97.6
100~2.94k
3k~100k
10~46.4
47~97.6
100~4.99k 5.1k~270k
274~332k
340~360k
E-24, E-96 Values
±100 (R)
±10 (Y)
±25 (E)
75 V
-55°C ~ 155°C
1,000pcs/reel (T1: 0.02% tolerance, 5ppm TCR only)
5,000 pcs/reel (T5) or 10,000pcs/reel (T10): All tolerance/TCR
combinations other than 0.02% tolerance, 5ppm TCR )
±5 (M)
±10 (Y)
±25 (E)
±10 (Y)
±25 (E)
±50 (Q)
±10 (Y)
±25 (E)
±5 (M)
±10 (Y)
±25 (E)
±10 (Y)
±25 (E)
100 V
±25 (E)
±25 (E)
1,000pcs/reel (T1: 0.02% tolerance, 5ppm TCR only)
5,000pcs/reel (T5: All tolerance/TCR combinations
other than 0.02% tolerance, 5ppm TCR )
CR0805
High power
Normal power
Ultra-reliability
±0.5(D)
±0.05(A),
±0.1(B),
±0.5(D)
CR1206
1/4 Watt
(Old RGH2012-2E)
1/8 Watt
1/10 Watt
±0.02(Q),
±0.05(A),
±0.1(B),
±0.5(D)
±0.05(A),
±0.1(B),
±0.5(D)
±0.1(B),
±0.5(D)
±0.5(D)
±0.05(A),
±0.1(B),
±0.5(D)
-----
1/4 Watt
1/8 Watt
±0.02(Q),
±0.05(A),
±0.1(B),
±0.5(D)
±0.05(A),
±0.1(B),
±0.5(D)
Tolerance% (code)
Resistance Range (Ω)
Resistance Offering
TCR ppm/°C (code)
Max Operating Voltage
Operating Temperature
Packaging
10~46.4
47~97.6
100~10k
10.2k~475k
487k~1M
10~46.4
47~97.6
100~33.2k
34k~1M
E-24, E-96 Values
±50 (Q)
±10 (Y)
±25 (E)
±5 (M)
±10 (Y)
±25 (E)
±10 (Y)
±25 (E)
±25 (E)
±50 (Q)
±10 (Y)
±25 (E)
200 V
±5 (M)
±10 (Y)
±25 (E)
±10 (Y)
±25 (E)
150 V
-55°C ~ 155°C
1,000pcs/reel (T1: 0.02% tolerance, 5ppm TCR only)
5,000pcs/reel (T5: All tolerance/TCR combinations
other than 0.02% tolerance, 5ppm TCR )
1,000pcs/reel (T1: 0.02% tolerance, 5ppm TCR only)
5,000pcs/reel (T5: All tolerance/TCR combinations
other than 0.02% tolerance, 5ppm TCR )
Note on
Power Handling
These components can safely be used at all power levels listed for their respective size. The reliability levels obtained (see table below) will be
relative to the power applied. As with most electronic devices, the higher the heat environment that the components are subjected to, the
greater the performance drift, and ultimately the shorter the expected component life. As you apply more power to the components, they
generate more heat. Therefore for a CR0805* component for example, if you were to apply 1/4 watt to the resistors it will generate more heat
than if you were to apply 1/10 watt. Referring to the reliability tables below and specifically the Load Life test, if you were to apply 1/4 watt
(high power) to a CR0805E1002B product (10KΩ), you can expect that after 1,000 hours of testing at those conditions, the change in
resistance would be ±0.5% or less. Similarly, if you were to apply 1/10 watt (low power) and the same remaining conditions to that same
component, after 1,000 hours of testing, the change in resistance would be ±0.1% or less.
Reliability Specifications:
Specification: drift limits for each power rating
Test
Test Method
Low Power
(Ultra Reliable)
Regular Power
≤ 47Ω
± 0.1%
High Power
≤ 47Ω
---
Typical
≤ 47Ω
Short Time Overload
Applied voltage: 2.5X rated voltage or 2X maximum
operating voltage, whichever is less.
Test duration: 5 seconds
Test Temperature: 85°C
Applied voltage: rated voltage
Test period: 1000 hours with power cycling as follows:
90 min. power ON/30 min. power OFF,
Test Condition: 85°C/85% RH
Applied voltage: 1/10 rated power
Test period: 1000 hours with power cycling as follows:
90 min. power ON/30 min. power OFF
Repeat 1000 cycles as follows:
-55°C(30 min.) / Room temp (2 min) /
+125°C(30 min.) / Room temp (2 min)
+155°C for 1000 hours with no load
± 0.1%
≥ 47Ω
± 0.05%
≥ 47Ω
± 0.05%
≥ 47Ω
± 0.1%
± (0.01%)
Load Life
± 0.25%
± 0.1%
± 0.5%
± 0.25%
---
± 0.5%
± (0.01%)
Moisture Load Life
± 0.25%
± 0.1%
± 0.5%
± 0.25%
---
± 0.5%
± (0.05%)
Temperature Cycle
High Temperature Exposure
± 0.25%
± 0.25%
± 0.1%
± 0.1%
± 0.25%
± 0.25%
± 0.1%
± 0.1%
---
---
± 0.1%
± 0.1%
± (0.01%)
± (0.01%)
Thin Film Technology Corp. / 1980 Commerce Drive, North Mankato, MN 56003 (USA) / (507) 625-8445 /
www.thin-film.com
CR02M580.00 - Rev Q - Page 3 of 3
Reliability Testing Graphs:
Power Derating Curve:
Pulse Power Limits:
Thin Film Technology Corp. / 1980 Commerce Drive, North Mankato, MN 56003 (USA) / (507) 625-8445 /
www.thin-film.com
京公网安备 11010802033920号
EEWORLD
