ERC Industrial
www.vishay.com
Vishay Dale
Metal Film Resistors, Axial, Industrial / High Reliability, Precision
FEATURES
• Same materials and construction as the
non-hermetic MIL-PRF-55182 resistors
• 100 % stabilization and screening tests.
Undergoes group A testing to MIL-PRF-55182
(thermal shock, 1 h overload, short time
overload, DC resistance) prior to shipping.
• Very low noise (-40 dB)
• Controlled temperature coefficient
• Epoxy coating provides superior moisture protection
• Standard lead is solderable and weldable
• Traceability of materials and processing
• Vishay Dale has complete capability to develop specific
reliability programs designed to customer requirements
• Material categorization: for definitions of compliance
please see
www.vishay.com/doc?99912
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL
ERC50..500
ERC55..500
ERC55..600
ERC65..500
ERC70..500
POWER
RATING
P
70 °C
W
0.10
0.125
0.25
0.50
0.75
POWER
RATING
P
125 °C
W
0.05
0.10
0.125
0.25
0.50
MAXIMUM
WORKING
VOLTAGE
(1)
V
200
200
250
300
350
RESISTANCE
RANGE
10 to 796K
10 to 2M
10 to 3.01M
10 to 3.01M
10 to 3.01M
TOLERANCE
(2)
±%
0.1, 0.5, 1
0.1, 0.5, 1
0.1, 0.5, 1
0.1, 0.5, 1
0.1, 0.5, 1
TEMPERATURE
COEFFICIENT
± ppm/°C
25, 50, 100
25, 50, 100
25, 50, 100
25, 50, 100
25, 50, 100
Notes
(1)
Continuous working voltage shall be
P
x
R
or maximum working voltage, whichever is less.
(2)
Tolerance of ± 0.1 % is available only in 50 ppm and 25 ppm temperature coefficients.
TECHNICAL SPECIFICATIONS
PARAMETER
Voltage Coefficient, Max.
Dielectric Strength
Insulations Resistance
Operating Temperature Range
Terminal Strength
Solderability
Weight
g
UNIT
ppm/V
V
AC
°C
lb
CONDITION
5/V when measured between 10 % and full rated voltage
ERC50-500, ERC55-500 and ERC55-600 = 450; ERC65-500 and ERC70-500 = 900
10
11
dry;
10
9
after moisture test
-65 to +175
2 lb pull test on ERC50-500, ERC55-500, ERC55-600 and ERC65-500;
4.5 lb pull test on ERC70-500
Continuous satisfactory coverage when tested in accordance with MIL-STD-202, method 208
ERC50-500 = 0.11; ERC55-500 = 0.35; ERC55-600 = 0.35; ERC65-500 = 0.84;
ERC70-500 = 1.06
Revision: 16-Sep-16
Document Number: 31104
1
For technical questions, contact:
ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
ERC Industrial
www.vishay.com
Vishay Dale
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: ERC553K0100FHEA500 (preferred part numbering format)
E
R
C
5
5
3
K
0
1
0
0
F
H
E
A
5
0
0
GLOBAL MODEL
ERC50
ERC55
ERC65
ERC70
RESISTANCE
VALUE
R
=
K
= k
M
= M
10R000
= 10
21K500
= 21.5 k
3M0100
= 3.01 M
TOLERANCE
CODE
B
= ± 0.1 %
D
= ± 0.5 %
F
=±1%
TEMPERATURE
COEFFICIENT
E
= ± 25 ppm
H
= ± 50 ppm
K
= ± 100 ppm
PACKAGING
EK
= lead (Pb)-free,
bulk
EA
= lead (Pb)-free,
T/R (full)
EB
= lead (Pb)-free,
T/R
(1000 pieces)
SPECIAL
(dash number)
500
= industrial
(all sizes)
600
= industrial
(55 only)
Note
• For additional information on packaging, refer to the Through Hole Resistor Packaging document (www.vishay.com/doc?31544).
DIMENSIONS
in inches (millimeters)
A
E
(1)
C
(Max.)
D
B
Note
(1)
Lead length for product in bulk pack. For product supplied in Tape and Reel, the actual lead length would be based on the body size, tape
spacing and lead trim.
VISHAY DALE
MODEL
ERC50-500
ERC55-500
ERC55-600
ERC65-500
ERC70-500
A
0.150 ± 0.020
(3.81 ± 0.51)
0.250 + 0.031 - 0.046
(6.35 + 0.79 - 1.17)
0.280 ± 0.020
(7.11 ± 0.51)
0.562 ± 0.031
(14.27 ± 0.79)
0.562 ± 0.031
(14.27 ± 0.79)
B
0.070 ± 0.010
(1.78 ± 0.25)
0.094 ± 0.012
(2.39 ± 0.30)
0.097 ± 0.012
(2.46 ± 0.30)
0.180 ± 0.015
(4.57 ± 0.38)
0.180 ± 0.015
(4.57 ± 0.38)
C
(MAX.)
0.187
(4.75)
0.300
(7.62)
0.350
(8.89)
0.687
(17.45)
0.687
(17.45)
D
0.016 ± 0.002
(0.41 ± 0.05)
0.025 ± 0.002
(0.64 ± 0.05)
0.025 ± 0.002
(0.64 ± 0.05)
0.025 ± 0.002
(0.64 ± 0.05)
0.032 ± 0.002
(0.81 ± 0.05)
E
1.25 ± 0.266
(31.75 ± 6.76)
1.50 ± 0.125
(38.1 ± 3.18)
1.50 ± 0.125
(38.1 ± 3.18)
1.50 ± 0.125
(38.1 ± 3.18)
1.50 ± 0.125
(38.1 ± 3.18)
MATERIAL SPECIFICATIONS
Element
Core
Encapsulation
Termination
Vacuum-deposited nickel-chrome alloy
Fire-cleaned high purity ceramic
Specially formulated epoxy compound
Standard lead material is solder-coated
copper. Solderable and weldable per
MIL-STD-1276, type C
POWER RATING
Power ratings are based on the following two conditions:
1. ± 2.0 % maximum
R
in 10 000 h load life
2. +175 °C maximum operating temperature
APPLICABLE MIL-SPECIFICATIONS
MIL-PRF-55182:
With the exception of the MIL spec’s 3 % lead (Pb)
requirement, the industrial ERC series would meet the
electrical, environmental and dimensional requirements of
MIL-PRF-55182.
Revision: 16-Sep-16
Document Number: 31104
2
For technical questions, contact:
ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
ERC Industrial
www.vishay.com
Vishay Dale
Vishay Dale ERC resistors have an operating temperature range of -65 °C to +175 °C. They must be derated according to the
following curve:
HEAT RISE (°C ABOVE AMBIENT)
ERC50-500
100
80
60
40
20
0
0
0.125
0.25
0.375
0.5
0.625
0.75 0.875
1 1.125
APPLIED POWER IN W
ERC65-500,
ERC70-500
ERC55-500,
ERC55-600
RATED POWER IN %
120
120
100
80
60
40
20
0
- 65 - 50
- 25
0
25
50
THERMAL RESISTANCE
DERATING
150 175 200
125
AMBIENT TEMPERATURE IN °C
75
100
MARKING
Partial model (for 50 size): C = ERC
Tolerance (for 50 size): B = 0.1 %, D = 0.5 %, F = 1 %
Temperature coefficient: T1 = 100 ppm, T2 = 50 ppm, T9 = 25 ppm
ERC50-500: (4 lines)
C500
33K2
FT1
1548
Partial model and dash number
Value
Tolerance and TC
4-digit date code
ERC55-500, ERC55-600: (4 lines)
55-500
1.21M
0.5 % T9
1532
Size and dash number
Value
Tolerance and TC
4-digit date code
ERC65-500, ERC70-500: (5 lines)
ERC65
-500
7.68K
1 % T2
1516
Full model and size
Dash number
Value
Tolerance and TC
4-digit date code
Revision: 16-Sep-16
Document Number: 31104
3
For technical questions, contact:
ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Revision: 13-Jun-16
1
Document Number: 91000
Talking
京公网安备 11010802033920号
EEWORLD
