302075-7ZTP115R00QB datasheet, PDF

Datasheet> All Categories > Passive components> The resistor> 302075-7ZTP115R00QB

302075-7ZTP115R00QB: DescriptionFixed Resistor, Metal Foil, 1.75W, 115ohm, 600V, 0.02% +/-Tol, -.2,.2ppm/Cel,; CategoryPassive components The resistor; File Size115KB，6 Pages; ManufacturerVishay; Websitehttp://www.vishay.com; Environmental Compliance

Download Datasheet Parametric View All

302075-7ZTP115R00QB Overview

Fixed Resistor, Metal Foil, 1.75W, 115ohm, 600V, 0.02% +/-Tol, -.2,.2ppm/Cel,

302075-7ZTP115R00QB Parametric

Parameter Name	Attribute value
Is it Rohs certified?	conform to
Objectid	979732250
Reach Compliance Code	unknown
ECCN code	EAR99
structure	Hermetically Sealed
JESD-609 code	e3
Lead diameter	0.64 mm
Lead length	25.4 mm
Number of terminals	4
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
Package diameter	12.7 mm
Package length	38.1 mm
Package form	4 Terminals
method of packing	Bulk
Rated power dissipation(P)	1.75 W
resistance	115 Ω
Resistor type	FIXED RESISTOR
series	HZ SERIES-OTHER
technology	METAL FOIL
Temperature Coefficient	-.2,.2 ppm/°C
Terminal surface	Tin (Sn)
Tolerance	0.02%
Operating Voltage	600 V

Preview

Download Datasheet

View All

HZ Series (Z-Foil) with Zero TCR

Vishay Foil Resistors

New Generation of Secondary Standards Hermetically Sealed Construction Ultra High

Precision Z-Foil Technology Resistors with TCR of ± 0.2 ppm/°C, Tolerance of ± 0.001 %

and Load Life Stability of ± 0.002 % (Metrology, Laboratory, Instrumentation, Industrial)

FEATURES

•

Temperature coefficient of resistance (TCR):

± 0.2 ppm/°C typical (- 55 °C to + 125 °C,

+ 25 °C ref.). For ultra high performances

(instrumentation and metrology) please refer to

the last page

•

Resistance range: 5

to 1.1 MΩ (higher or lower values of

resistance available)

•

Vishay Foil resistors are not restricted to standard values;

specific “as required” values can be supplied at no extra

cost or delivery (e.g. 1K2345 vs. 1K)

•

Power coefficient “ΔR due to self heating”:

5 ppm at rated power with the Z-Foil technology

•

Tolerance:

to ± 0.001 % (10 ppm)

•

Load life stability to ± 0.002 % (20 ppm) at 25 °C, 2000 h

at rated power

•

Load life stability, can be considerably improved

through in-house stabilization

•

Shelf life stability: 2 ppm for at least 6 years

(unaffected by humidity)

•

Electrostatic discharge (ESD) up to 25 000 V

•

Power rating: 0.3 W to 2.5 W at + 25 °C (depending on

model - see table 2)

•

Non-inductive, non-capacitive design

•

Non hot spot design

•

Rise time: 1 ns effectively no ringing

•

Current noise: 0.010 µV

RMS

/V of applied voltage (< - 40 dB)

•

Thermal EMF: 0.05 µV/°C typical

•

Voltage coefficient: < 0.1 ppm/V

•

Thermal stabilization time < 1 s (nominal value achieved

within 10 ppm of steady state value)

•

Non-inductive: < 0.08 µH

•

Terminal finish available: lead (Pb)-free or tin/lead alloy

•

Impervious to harmful environments - oil filled

•

Prototype quantities available in just 5 working days

or sooner. For more information, please contact

foil@vishay.com

•

For better performances (values, TCR, tolerance, stability),

please contact us

INTRODUCTION

The Z-Foil based oil filled, hermetically sealed HZ Series

resistors represent an industry breakthrough. The hermetic

sealing eliminates the ingress of moisture and oxygen, while

the oil acts as a thermal conductor, thus eliminating

long-term degradation elements of unsealed resistors, while

at the same time allowing the device to accept short periods

of overload without degradation.

The Z-Foil technology provides a significant reduction of the

resistive components, sensitivity to ambient temperature

variations (TCR) and applied power changes (PCR). When

combined with the hermetic sealing and oil filling, the

HZ Series resistors become

the most precise and stable

resistors available.

They are used as the most precise

secondary standards for ultra precision metrology.

With accuracies of ± 0.001 % (10 ppm) and a resistance

range from 5

to 1.1 MΩ and long term shelf life of less than

2 ppm, these devices are virtually secondary standards that

can be carried in sets for daily or periodic calibration of

factory measurement equipment.

The HZ Series is available with laboratory and metrology

level precision and long-term stability with additional

in-house oriented processes such as: chip stabilization,

special TCR plotting, additional treatments for ultra

stability and special post manufacturing operations

(PMO). (Please refer to the last page)

TABLE 1 - TCR VS. RESISTANCE VALUE

RESISTANCE VALUE

(Ω)

TYPICAL TCR AND

MAX. SPREAD

(- 55 °C to + 125 °C, + 25 °C ref.)

(ppm/°C)

± 0.2 ± 2

± 0.2 ± 3

± 0.2 ± 4

FIGURE 1 - SHELF LIFE - VHA518-11

12K9 VS. QHE

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

- 0.1

100 200 300 400 500 600 700 800 900 1000

100 to < 1M1

50 to < 100

5 to < 50

Note

• For maximum TCR < 1 ppm/°C, see VHP100 and contact

application engineering

Resistance Change (ppm)

Time (Days)

Document Number: 63120

Revision: 03-Dec-09

For any questions, contact:

foil@vishay.com

www.vishay.com

Recommended Resources

CD4098 pulse delay and stretching circuit

Interface circuit between CMOS and NMOS a

Humidity detection circuit diagram of temperature sensor

Street light automatic control circuit

Dual output electronic ballast circuit

555 long delay timer circuit (1)

Using a single chip microcomputer to read out segment code LCD: [i=s]This post was last edited by warlock1998 on 2022-6-15 13:56[/i]Carry out secondary development of existing products and read out the data of the segment code display screen. My method: Use a sing...; warlock1998 Test/Measurement

dsp28335 SCI Summary (Serial One-Step Communication): 1. Serial transmission 1) Simplex: One-way data transmission, can only send or receive (1 data line) 2) Half-duplex: Data transmission is bidirectional, but at any time, only one data line can be sent...; Aguilera DSP and ARM Processors

AT2401C Zigbee chip pin diagram and technical introduction: AT2401C is a single-chip RF front-end with fully integrated RF functions for Zigbee, wireless sensor networks and other 2.4GHz band wireless systems. AT2401C is a single-chip device implemented in CMO...; Jacktang Wireless Connectivity

How to read and decode the PPM signal of the RC remote control: RT I searched the Internet but couldn't find any implementation of MicroPython. There is a headphone jack on the RC remote control. I want to use "ESP32/ESP8266" through "PCM5102 module" to read its P...; 凉冰 MicroPython Open Source section

【TouchGFX Design】graph waveform drawing: @Shao Shaoshao[/url] [/size][/font][font=Microsoft YaHei][size=4] [url=https://en.eeworld.com/bbs/thread-1074576-1-1.html]TouchGFX Design" + graph waveform drawing 1[/url][/size][/font] [url=https://b...; okhxyyo stm32/stm8

C5000 compiles SUBC instruction to implement division: Solve y=(ax^2-bx+c)/(dx+e) by programming, and put the quotient and remainder in the data memory 1000H and 1001H respectively. (1) Given a=8, b=6, c=10, d=7, e=9, x=5, find y. (2) Given a=0.9, b=0.1, ...; 灞波儿奔 Microcontroller MCU

Shortcut: 00 01 02 03 04 05 06 07 08 09 0A 0C 0F 0J 0L 0M 0R 0S 0T 0Z 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 1H 1K 1M 1N 1P 1S 1T 1V 1X 1Z 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 2G 2K 2M 2N 2P 2Q 2R 2S 2T 2W 2Z 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F 3G 3H 3J 3K 3L 3M 3N 3P 3R 3S 3T 3V 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4M 4N 4P 4S 4T 50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5E 5G 5H 5K 5M 5N 5P 5S 5T 5V 60 61 62 63 64 65 66 67 68 69 6A 6C 6E 6F 6M 6N 6P 6R 6S 6T 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7M 7N 7P 7Q 7V 7W 7X 80 81 82 83 84 85 86 87 88 89 8A 8D 8E 8L 8N 8P 8S 8T 8W 8Y 8Z 90 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D 9F 9G 9H 9L 9S 9T 9W

Popular Components