Soldering and Rework System
Cartridge heater technology provides soldering and rework performance to suit even the most
demanding SMT removal and placement applications. The cartridges provide fast thermal
performance and respond quickly to the load demands. A small shaft diameter provides access to
tightly cramped rework areas and enables the most difficult operations to be performed
effortlessly.
MFR-SRC SOLDERING & REWORK SYSTEM
Part No.
MFR-SRC
INCLUDES
MFR-PS1K
MFR-HSR
MFR-WSSR
Two Port Universal Voltage Power Supply
Soldering and Rework Hand-piece
Soldering Workstand
Description
Soldering and Rework System
MFR-PTZ, MFR-SRC, MFR-PST, MFR-STZ
Ambient Operating Temperature:10-
40°C
Maximum Enclosure Temperature:55°C
Input Line Voltage:100-
240 VAC, grounded circuit
Input Line Frequency:50/60
Hz
Power Consumption:65
Watts max.
Output Power:
50 Watts max. at 22°C ambient temperature
Output Frequency:450
KHz
Power Cord 3-Wire:183cm
(18/3") SJT
Power Supply Dimensions w x d x h:
122mm x 200mm x 152.5mm (4.8" x 8" x 6")
Agency Tested Per:IEC
61000-6-1,EC 61000-6-3 and
UL499, FCC CFR Part 15
Tip-to-Ground Potential:<
2mV
Tip-to-Ground Resistance:<
2 ohms
Idle Temperature Stability:±
1.1°C in still air
Contents subject to change without notice
Standard Soldering Tip Cartridges
The Standard Soldering Tip Cartridges are used with the MFR-HSR Soldering & Rework Hand-piece
and have been designed to deliver outstanding performance for the majority of point-to-point
Hand-piece Cable Length:
L=71cm (48"), burn proof, ESD safe
Connector:8-pin
power connector
Workstand Dimensions w x d x h:
100 mm x 200 mm x 100 mm (4" x 8" x 4")
soldering and basic rework applications. The geometries within the range have been optimized to
deliver maximum accessibility combined with optimal thermal efficiency within a narrow cartridge
diameter.
With hand soldering, the task is to make a
quality solder connection, without damaging the
substrate and without negatively impacting
SFP-BVL10
Bevel Cartridge, 60° 1.0mm (.04")
throughput. All of the standard MFR Series power
tips & rework cartridges are designed for use
with glass fiber (FR4) PCB substrates. This is
denoted by the second letter in the part
number: "F". For example: SFP-CH10, DFP-CN3,
and SFV-CNL10.
However, some specialist applications require
SFP-CH10
Chisel Cartridge, 30° 1.0mm (.04")
SFP-CH15
Chisel Cartridge, 30° 1.5mm (.06")
working with thermally demanding or
temperature sensitive substrates, such as
ceramic hybrids or flexible circuits. OK
International has developed specialty heaters
that quickly deliver the necessary power, but
SFP-CH20
Chisel Cartridge, 30° 2.0mm (.08")
operate at temperatures that minimize the risk
of substrate damage. These are denoted by
replacing the "F" in the part number with a "T"
for temperature sensitive or a "C" for demanding
loads. Please contact your local representative
for information and availability of specialty tip
heaters. For example: STP-CH10 and DCP-CN3.
F
= Standard FR4 Substrate
T
= Temperature
Sensitive
C
= Ceramic or Heavy Load
SFP-CH25
Chisel Cartridge, 30° 2.5mm (.10")
SFP-CH50
Chisel Cartridge, 30° 5.0mm (.20")
SFP-CHB15
Chisel Cartridge, 30° Bent 1.5mm (.06")
SFP-CHL20
Chisel Cartridge, 60° Long Reach 2.0mm (.08")
SFP-CN04
Conical Cartridge, 0.4mm (.016")
SFP-CN05
Conical Cartridge, 0.5mm (.02")
SFP-CNB04
Conical Cartridge Bent, 0.4mm (.016")
SFP-CNB05
Conical Cartridge Bent, 0.5mm (.02")
SFP-CNL04
Conical Cartridge Long Reach, 0.4mm (.016")
SFP-DRH05
Drag Soldering Cartridge, Hoof 0.5mm (.02")
MFR-SMT in Action
SFP-DRH15
Drag Soldering Cartridge, Hoof 1.5mm (.06")
SFP-DRH35
Drag Soldering Cartridge, Hoof 3.5mm (.14")
SFP-DRK50
Drag Soldering Cartridge, Knife 5.0mm (.20")
To order specialty versions of the Soldering Tip Cartridges replace the "F" in the part number with
the appropriate letter designate for your application when ordering:
T
= Temperature Sensitive
C
= Ceramic or Heavy Load
Rework Cartridges
The Rework Cartridges are used with the MFR-HSR Soldering & Rework Hand-piece for conduction
rework of surface mount components. The geometries are compatible with common SMT Chip and
SOIC components.
Blade Cartridges
Part No.
Description
A
RFP-BL1
Blade Cartridge
10mm (0.4")
RFP-BL2
Blade Cartridge
16mm (0.63")
RFP-BL3
Blade Cartridge
22mm (0.87")
Slot Cartridges
Part No.
SMT Type
A
RFP-SL1
0805 Chip Package
2.34mm (.092")
RFP-SL2
1206 Chip Package
3.48mm (.137")
Tunnel Cartridges
Dimensions in mm (")
Part
No.
SMT
Type
A2
A
B
D
RFP-
DL1
SOIC
14-16
5.18
(.204)
5.18
(.204)
4.32
(.17)
3.22
(.127)
RFP-
DL2
RFP-
DL13
SOIC 8
5.18
(.204)
6.86
(.270)
5.18
(.204)
6.86
(.270)
4.32
(.17)
11.18
(.44)
2.29
(.090)
2.29
(.090)
SOIC
16
Quad Cartridges
Dimensions in mm (")
Part
No.
SMT
Type
A2
A
B2
B
D
RFP-
QD4
PLCC
32
11.43
(.450)
12.70
(.500)
13.97
(.550)
15.24
(.600)
3.81
(.150)
京公网安备 11010802033920号
EEWORLD
